137 lines
3.9 KiB
Plaintext
137 lines
3.9 KiB
Plaintext
/*
|
|
ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010 Giovanni Di Sirio.
|
|
|
|
This file is part of ChibiOS/RT.
|
|
|
|
ChibiOS/RT is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
ChibiOS/RT is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
/**
|
|
* @defgroup STM32 STM32 Support
|
|
* @brief STM32 specific support.
|
|
* @details The STM32 support includes:
|
|
* - I/O ports driver.
|
|
* - Buffered, interrupt driven, serial driver.
|
|
* - Interrupt driver CAN driver.
|
|
* - DMA capable, high performance, ADC driver.
|
|
* - DMA capable, high performance, SPI driver.
|
|
* - PWM driver.
|
|
* - A demo supporting the kernel test suite.
|
|
* - A demo that demonstrate the FatFs use with the MMC driver.
|
|
* .
|
|
* @ingroup ARMCMx
|
|
*/
|
|
|
|
/**
|
|
* @defgroup STM32_HAL STM32 HAL Support
|
|
* @brief HAL support.
|
|
*
|
|
* @ingroup STM32
|
|
*/
|
|
|
|
/**
|
|
* @defgroup STM32F10x_HAL STM32F103 HAL Support
|
|
* @brief HAL support for STM32 LD, MD and HD families.
|
|
*
|
|
* @ingroup STM32_HAL
|
|
*/
|
|
|
|
/**
|
|
* @defgroup STM32_PAL STM32 I/O Ports Support
|
|
* @brief I/O Ports peripherals support.
|
|
* @details This module supports the STM3 GPIO controller. The controller
|
|
* supports the following features (see @ref PAL):
|
|
* - 16 bits wide ports.
|
|
* - Atomic set/reset functions.
|
|
* - Atomic set+reset function (atomic bus operations).
|
|
* - Output latched regardless of the pad setting.
|
|
* - Direct read of input pads regardless of the pad setting.
|
|
* .
|
|
* <h2>Supported Setup Modes</h2>
|
|
* - @p PAL_MODE_RESET.
|
|
* - @p PAL_MODE_UNCONNECTED.
|
|
* - @p PAL_MODE_INPUT.
|
|
* - @p PAL_MODE_INPUT_PULLUP.
|
|
* - @p PAL_MODE_INPUT_PULLDOWN.
|
|
* - @p PAL_MODE_INPUT_ANALOG.
|
|
* - @p PAL_MODE_OUTPUT_PUSHPULL.
|
|
* - @p PAL_MODE_OUTPUT_OPENDRAIN.
|
|
* .
|
|
* Any attempt to setup an invalid mode is ignored.
|
|
*
|
|
* <h2>Suboptimal Behavior</h2>
|
|
* Some GPIO features are less than optimal:
|
|
* - Pad/port toggling operations are not atomic.
|
|
* - Pad/group mode setup is not atomic.
|
|
* - Writing on pads/groups/ports programmed as input with pull-up/down
|
|
* resistor can change the resistor setting because the output latch is
|
|
* used for resistor selection.
|
|
* .
|
|
* @ingroup STM32
|
|
*/
|
|
|
|
/**
|
|
* @defgroup STM32_SERIAL STM32 USART Support
|
|
* @brief USART peripherals support.
|
|
* @details The serial driver supports the STM32 USARTs in asynchronous
|
|
* mode.
|
|
*
|
|
* @ingroup STM32
|
|
*/
|
|
|
|
/**
|
|
* @defgroup STM32_DMA STM32 DMA Support
|
|
* @brief DMA support.
|
|
* @details The DMA helper driver allows to stop the DMA clock when no other
|
|
* driver requires its services.
|
|
*
|
|
* @ingroup STM32
|
|
*/
|
|
|
|
/**
|
|
* @defgroup STM32_ADC STM32 ADC Support
|
|
* @brief ADC peripherals support.
|
|
* @details The ADC driver supports the STM32 ADCs using DMA channels for
|
|
* improved performance.
|
|
*
|
|
* @ingroup STM32
|
|
*/
|
|
|
|
/**
|
|
* @defgroup STM32_CAN STM32 CAN Support
|
|
* @brief CAN peripheral support.
|
|
* @details The CAN driver supports the STM32 bxCAN unit.
|
|
*
|
|
* @ingroup STM32
|
|
*/
|
|
|
|
|
|
/**
|
|
* @defgroup STM32_PWM STM32 PWM Support
|
|
* @brief TIMx peripherals as PWM generators support.
|
|
* @details The PWM driver supports the STM32 TIMx units as PWM generators.
|
|
*
|
|
* @ingroup STM32
|
|
*/
|
|
|
|
/**
|
|
* @defgroup STM32_SPI STM32 SPI Support
|
|
* @brief SPI peripherals support.
|
|
* @details The SPI driver supports the STM32 SPIs using DMA channels for
|
|
* improved performance.
|
|
*
|
|
* @ingroup STM32
|
|
*/
|
|
|