227 lines
7.3 KiB
C
227 lines
7.3 KiB
C
/*
|
|
ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
|
|
|
|
Licensed under the Apache License, Version 2.0 (the "License");
|
|
you may not use this file except in compliance with the License.
|
|
You may obtain a copy of the License at
|
|
|
|
http://www.apache.org/licenses/LICENSE-2.0
|
|
|
|
Unless required by applicable law or agreed to in writing, software
|
|
distributed under the License is distributed on an "AS IS" BASIS,
|
|
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
See the License for the specific language governing permissions and
|
|
limitations under the License.
|
|
*/
|
|
|
|
#ifndef _BOARD_H_
|
|
#define _BOARD_H_
|
|
|
|
/*
|
|
* Setup for STMicroelectronics STM3220G-EVAL board.
|
|
*/
|
|
|
|
/*
|
|
* Board identifier.
|
|
*/
|
|
#define BOARD_ST_STM3220G_EVAL
|
|
#define BOARD_NAME "ST STM3220G-EVAL"
|
|
|
|
/*
|
|
* Board frequencies.
|
|
* NOTE: The HSE crystal is not fitted by default on the board.
|
|
*/
|
|
#define STM32_LSECLK 32768
|
|
#define STM32_HSECLK 25000000
|
|
|
|
/*
|
|
* MCU type as defined in the ST header file stm32f2xx.h.
|
|
*/
|
|
#define STM32F2XX
|
|
|
|
/*
|
|
* IO pins assignments.
|
|
*/
|
|
|
|
#define GPIOA_WAKEUP_BUTTON 0
|
|
|
|
#define GPIOB_ETHER_INT 14
|
|
#define GPIOB_NAND_INT 15
|
|
|
|
#define GPIOC_TAMPER_BUTTON 0
|
|
#define GPIOC_LED4 7
|
|
|
|
#define GPIOF_POT 9
|
|
|
|
#define GPIOG_LED1 6
|
|
#define GPIOG_LED2 8
|
|
#define GPIOG_USER_BUTTON 15
|
|
|
|
#define GPIOH_EXPANDER_INT 12
|
|
#define GPIOH_SD_DETECT 13
|
|
|
|
#define GPIOI_LED3 9
|
|
|
|
/*
|
|
* I/O ports initial setup, this configuration is established soon after reset
|
|
* in the initialization code.
|
|
* Please refer to the STM32 Reference Manual for details.
|
|
*/
|
|
#define PIN_MODE_INPUT(n) (0 << ((n) * 2))
|
|
#define PIN_MODE_OUTPUT(n) (1 << ((n) * 2))
|
|
#define PIN_MODE_ALTERNATE(n) (2 << ((n) * 2))
|
|
#define PIN_MODE_ANALOG(n) (3 << ((n) * 2))
|
|
#define PIN_OTYPE_PUSHPULL(n) (0 << (n))
|
|
#define PIN_OTYPE_OPENDRAIN(n) (1 << (n))
|
|
#define PIN_OSPEED_2M(n) (0 << ((n) * 2))
|
|
#define PIN_OSPEED_25M(n) (1 << ((n) * 2))
|
|
#define PIN_OSPEED_50M(n) (2 << ((n) * 2))
|
|
#define PIN_OSPEED_100M(n) (3 << ((n) * 2))
|
|
#define PIN_PUDR_FLOATING(n) (0 << ((n) * 2))
|
|
#define PIN_PUDR_PULLUP(n) (1 << ((n) * 2))
|
|
#define PIN_PUDR_PULLDOWN(n) (2 << ((n) * 2))
|
|
#define PIN_AFIO_AF(n, v) ((v##U) << ((n % 8) * 4))
|
|
|
|
/*
|
|
* Port A setup.
|
|
* All input with pull-up except:
|
|
* PA8 - MCO 1 (alternate 0).
|
|
* PA13 - JTMS/SWDAT (alternate 0).
|
|
* PA14 - JTCK/SWCLK (alternate 0).
|
|
* PA15 - JTDI (alternate 0).
|
|
*/
|
|
#define VAL_GPIOA_MODER (PIN_MODE_ALTERNATE(8) | \
|
|
PIN_MODE_ALTERNATE(13) | \
|
|
PIN_MODE_ALTERNATE(14) | \
|
|
PIN_MODE_ALTERNATE(15))
|
|
#define VAL_GPIOA_OTYPER 0x00000000
|
|
#define VAL_GPIOA_OSPEEDR 0xFFFFFFFF
|
|
#define VAL_GPIOA_PUPDR (PIN_PUDR_FLOATING(13) | \
|
|
PIN_PUDR_FLOATING(14) | \
|
|
PIN_PUDR_FLOATING(15))
|
|
#define VAL_GPIOA_ODR 0xFFFFFFFF
|
|
#define VAL_GPIOA_AFRL 0x00000000
|
|
#define VAL_GPIOA_AFRH 0x00000000
|
|
|
|
/*
|
|
* Port B setup.
|
|
* All input with pull-up except:
|
|
* PB3 - JTDO (alternate 0).
|
|
* PB4 - JNTRST (alternate 0).
|
|
*/
|
|
#define VAL_GPIOB_MODER (PIN_MODE_ALTERNATE(3) | \
|
|
PIN_MODE_ALTERNATE(4))
|
|
#define VAL_GPIOB_OTYPER 0x00000000
|
|
#define VAL_GPIOB_OSPEEDR 0xFFFFFFFF
|
|
#define VAL_GPIOB_PUPDR (~(PIN_PUDR_FLOATING(3) | \
|
|
PIN_PUDR_FLOATING(4)))
|
|
#define VAL_GPIOB_ODR 0xFFFFFFFF
|
|
#define VAL_GPIOB_AFRL 0x00000000
|
|
#define VAL_GPIOB_AFRH 0x00000000
|
|
|
|
/*
|
|
* Port C setup.
|
|
* All input with pull-up except:
|
|
* PC9 - MCO2 (alternate 0).
|
|
* PC10 - USART3_TX (alternate 7).
|
|
* PC11 - USART3_RX (alternate 7).
|
|
* PC14 - OSC32_INT (input floating).
|
|
* PC15 - OSC32_OUT (input floating).
|
|
*/
|
|
#define VAL_GPIOC_MODER (PIN_MODE_ALTERNATE(9) | \
|
|
PIN_MODE_ALTERNATE(10) | \
|
|
PIN_MODE_ALTERNATE(11))
|
|
#define VAL_GPIOC_OTYPER 0x00000000
|
|
#define VAL_GPIOC_OSPEEDR 0xFFFFFFFF
|
|
#define VAL_GPIOC_PUPDR (~(PIN_PUDR_PULLUP(11) | \
|
|
PIN_PUDR_FLOATING(14) | \
|
|
PIN_PUDR_FLOATING(15)))
|
|
#define VAL_GPIOC_ODR 0xFFFFFFFF
|
|
#define VAL_GPIOC_AFRL 0x00000000
|
|
#define VAL_GPIOC_AFRH (PIN_AFIO_AF(7, 10) | \
|
|
PIN_AFIO_AF(7, 11))
|
|
|
|
/*
|
|
* Port D setup.
|
|
* All input with pull-up.
|
|
*/
|
|
#define VAL_GPIOD_MODER 0x00000000
|
|
#define VAL_GPIOD_OTYPER 0x00000000
|
|
#define VAL_GPIOD_OSPEEDR 0xFFFFFFFF
|
|
#define VAL_GPIOD_PUPDR 0xFFFFFFFF
|
|
#define VAL_GPIOD_ODR 0xFFFFFFFF
|
|
#define VAL_GPIOD_AFRL 0x00000000
|
|
#define VAL_GPIOD_AFRH 0x00000000
|
|
|
|
/*
|
|
* Port E setup.
|
|
* All input with pull-up.
|
|
*/
|
|
#define VAL_GPIOE_MODER 0x00000000
|
|
#define VAL_GPIOE_OTYPER 0x00000000
|
|
#define VAL_GPIOE_OSPEEDR 0xFFFFFFFF
|
|
#define VAL_GPIOE_PUPDR 0xFFFFFFFF
|
|
#define VAL_GPIOE_ODR 0xFFFFFFFF
|
|
#define VAL_GPIOE_AFRL 0x00000000
|
|
#define VAL_GPIOE_AFRH 0x00000000
|
|
|
|
/*
|
|
* Port F setup.
|
|
* All input with pull-up.
|
|
*/
|
|
#define VAL_GPIOF_MODER 0x00000000
|
|
#define VAL_GPIOF_OTYPER 0x00000000
|
|
#define VAL_GPIOF_OSPEEDR 0xFFFFFFFF
|
|
#define VAL_GPIOF_PUPDR 0xFFFFFFFF
|
|
#define VAL_GPIOF_ODR 0xFFFFFFFF
|
|
#define VAL_GPIOF_AFRL 0x00000000
|
|
#define VAL_GPIOF_AFRH 0x00000000
|
|
|
|
/*
|
|
* Port G setup.
|
|
* All input with pull-up.
|
|
*/
|
|
#define VAL_GPIOG_MODER (PIN_MODE_OUTPUT(GPIOG_LED1))
|
|
#define VAL_GPIOG_OTYPER 0x00000000
|
|
#define VAL_GPIOG_OSPEEDR 0xFFFFFFFF
|
|
#define VAL_GPIOG_PUPDR (~(PIN_PUDR_FLOATING(GPIOG_LED1)))
|
|
#define VAL_GPIOG_ODR 0xFFFFFFBF
|
|
#define VAL_GPIOG_AFRL 0x00000000
|
|
#define VAL_GPIOG_AFRH 0x00000000
|
|
|
|
/*
|
|
* Port H setup.
|
|
* All input with pull-up.
|
|
*/
|
|
#define VAL_GPIOH_MODER 0x00000000
|
|
#define VAL_GPIOH_OTYPER 0x00000000
|
|
#define VAL_GPIOH_OSPEEDR 0xFFFFFFFF
|
|
#define VAL_GPIOH_PUPDR 0xFFFFFFFF
|
|
#define VAL_GPIOH_ODR 0xFFFFFFFF
|
|
#define VAL_GPIOH_AFRL 0x00000000
|
|
#define VAL_GPIOH_AFRH 0x00000000
|
|
|
|
/*
|
|
* Port I setup.
|
|
* All input with pull-up.
|
|
*/
|
|
#define VAL_GPIOI_MODER 0x00000000
|
|
#define VAL_GPIOI_OTYPER 0x00000000
|
|
#define VAL_GPIOI_OSPEEDR 0xFFFFFFFF
|
|
#define VAL_GPIOI_PUPDR 0xFFFFFFFF
|
|
#define VAL_GPIOI_ODR 0xFFFFFFFF
|
|
#define VAL_GPIOI_AFRL 0x00000000
|
|
#define VAL_GPIOI_AFRH 0x00000000
|
|
|
|
#if !defined(_FROM_ASM_)
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
void boardInit(void);
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
#endif /* _FROM_ASM_ */
|
|
|
|
#endif /* _BOARD_H_ */
|