zcy
/
tinySA
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
tinySA/tools/gencfg/processors/boards/stm32f4xx/templates/board.h.ftl

328 lines
10 KiB
Plaintext
Raw Blame History

[#ftl]
[#--
ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
2011,2012 Giovanni Di Sirio.
This file is part of ChibiOS/RT.
ChibiOS/RT is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
ChibiOS/RT is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
--]
[@pp.dropOutputFile /]
[#import "/@lib/libutils.ftl" as utils /]
[#import "/@lib/liblicense.ftl" as license /]
[@pp.changeOutputFile name="board.h" /]
/*
[@license.EmitLicenseAsText /]
*/
#ifndef _BOARD_H_
#define _BOARD_H_
/*
* Setup for ${doc1.board.board_name[0]} board.
*/
/*
* Board identifier.
*/
#define BOARD_${doc1.board.board_id[0]}
#define BOARD_NAME "${doc1.board.board_name[0]}"
[#if doc1.board.ethernet_phy[0]??]
/*
* Ethernet PHY type.
*/
#define BOARD_PHY_ID ${doc1.board.ethernet_phy.identifier[0]}
[#if doc1.board.ethernet_phy.bus_type[0]?string == "RMII"]
#define BOARD_PHY_RMII
[/#if]
[/#if]
/*
* Board oscillators-related settings.
[#if doc1.board.clocks.@LSEFrequency[0]?number == 0]
* NOTE: LSE not fitted.
[/#if]
[#if doc1.board.clocks.@HSEFrequency[0]?number == 0]
* NOTE: HSE not fitted.
[/#if]
*/
#if !defined(STM32_LSECLK)
#define STM32_LSECLK ${doc1.board.clocks.@LSEFrequency[0]}
#endif
#if !defined(STM32_HSECLK)
#define STM32_HSECLK ${doc1.board.clocks.@HSEFrequency[0]}
#endif
[#if doc1.board.clocks.@HSEBypass[0]?string == "true"]
#define STM32_HSE_BYPASS
[/#if]
/*
* Board voltages.
* Required for performance limits calculation.
*/
#define STM32_VDD ${doc1.board.clocks.@VDD[0]}
/*
* MCU type as defined in the ST header file stm32f4xx.h.
*/
#define STM32F4XX
/*
* IO pins assignments.
*/
[#list doc1.board.ports.* as port]
[#assign port_name = port?node_name?upper_case /]
[#list port.* as pin]
[#assign pin_name = pin?node_name?upper_case /]
[#assign name = pin.@ID[0]?string?trim /]
[#if name?length == 0]
[#assign name = pin_name /]
[/#if]
#define ${(port_name + "_" + name)?right_pad(27, " ")} ${pin_index?string}
[/#list]
[/#list]
/*
* I/O ports initial setup, this configuration is established soon after reset
* in the initialization code.
* Please refer to the STM32 Reference Manual for details.
*/
#define PIN_MODE_INPUT(n) (0U << ((n) * 2))
#define PIN_MODE_OUTPUT(n) (1U << ((n) * 2))
#define PIN_MODE_ALTERNATE(n) (2U << ((n) * 2))
#define PIN_MODE_ANALOG(n) (3U << ((n) * 2))
#define PIN_ODR_LOW(n) (0U << (n))
#define PIN_ODR_HIGH(n) (1U << (n))
#define PIN_OTYPE_PUSHPULL(n) (0U << (n))
#define PIN_OTYPE_OPENDRAIN(n) (1U << (n))
#define PIN_OSPEED_2M(n) (0U << ((n) * 2))
#define PIN_OSPEED_25M(n) (1U << ((n) * 2))
#define PIN_OSPEED_50M(n) (2U << ((n) * 2))
#define PIN_OSPEED_100M(n) (3U << ((n) * 2))
#define PIN_PUPDR_FLOATING(n) (0U << ((n) * 2))
#define PIN_PUPDR_PULLUP(n) (1U << ((n) * 2))
#define PIN_PUPDR_PULLDOWN(n) (2U << ((n) * 2))
#define PIN_AFIO_AF(n, v) ((v##U) << ((n % 8) * 4))
[#list doc1.board.ports.* as port]
[#assign port_name = port?node_name?upper_case /]
/*
* ${port_name} setup:
*
[#-- Generating pin descriptions inside the comment.--]
[#list port.* as pin]
[#assign pin_name = pin?node_name?upper_case /]
[#assign name = pin.@ID[0]?string?trim /]
[#if name?length == 0]
[#assign name = pin_name /]
[/#if]
[#assign mode = pin.@Mode[0] /]
[#assign type = pin.@Type[0] /]
[#assign resistor = pin.@Resistor[0] /]
[#assign speed = pin.@Speed[0] /]
[#assign alternate = pin.@Alternate[0] /]
[#if mode == "Input"]
[#assign desc = mode + " " + resistor /]
[#elseif mode == "Output"]
[#assign desc = mode + " " + type + " " + speed /]
[#elseif mode == "Alternate"]
[#assign desc = mode + " " + alternate /]
[#else]
[#assign desc = "Analog" /]
[/#if]
* P${(port?node_name[4..] + pin_index?string)?right_pad(3, " ")} - ${name?right_pad(26, " ")}(${desc?lower_case}).
[/#list]
*/
[#--
-- Generating MODER register value.
--]
[#list port.* as pin]
[#assign pin_name = pin?node_name?upper_case /]
[#assign name = pin.@ID[0]?string?trim /]
[#if name?length == 0]
[#assign name = pin_name /]
[/#if]
[#assign mode = pin.@Mode[0] /]
[#if mode == "Input"]
[#assign out = "PIN_MODE_INPUT(" + port_name + "_" + name + ")" /]
[#elseif mode == "Output"]
[#assign out = "PIN_MODE_OUTPUT(" + port_name + "_" + name + ")" /]
[#elseif mode == "Alternate"]
[#assign out = "PIN_MODE_ALTERNATE(" + port_name + "_" + name + ")" /]
[#else]
[#assign out = "PIN_MODE_ANALOG(" + port_name + "_" + name + ")" /]
[/#if]
[#if pin_index == 0]
[#assign line = "#define VAL_" + port_name + "_MODER (" + out /]
[#else]
[#assign line = " " + out /]
[/#if]
[#if pin_index < 15]
${(line + " |")?right_pad(76, " ") + "\\"}
[#else]
${line + ")"}
[/#if]
[/#list]
[#--
-- Generating OTYPER register value.
--]
[#list port.* as pin]
[#assign pin_name = pin?node_name?upper_case /]
[#assign name = pin.@ID[0]?string?trim /]
[#if name?length == 0]
[#assign name = pin_name /]
[/#if]
[#assign type = pin.@Type[0] /]
[#if type == "PushPull"]
[#assign out = "PIN_OTYPE_PUSHPULL(" + port_name + "_" + name + ")" /]
[#else]
[#assign out = "PIN_OTYPE_OPENDRAIN(" + port_name + "_" + name + ")" /]
[/#if]
[#if pin_index == 0]
[#assign line = "#define VAL_" + port_name + "_OTYPER (" + out /]
[#else]
[#assign line = " " + out /]
[/#if]
[#if pin_index < 15]
${(line + " |")?right_pad(76, " ") + "\\"}
[#else]
${line + ")"}
[/#if]
[/#list]
[#--
-- Generating SPEEDR register value.
--]
[#list port.* as pin]
[#assign pin_name = pin?node_name?upper_case /]
[#assign name = pin.@ID[0]?string?trim /]
[#if name?length == 0]
[#assign name = pin_name /]
[/#if]
[#assign speed = pin.@Speed[0] /]
[#if speed == "Minimum"]
[#assign out = "PIN_OSPEED_2M(" + port_name + "_" + name + ")" /]
[#elseif speed == "Low"]
[#assign out = "PIN_OSPEED_25M(" + port_name + "_" + name + ")" /]
[#elseif speed == "High"]
[#assign out = "PIN_OSPEED_50M(" + port_name + "_" + name + ")" /]
[#else]
[#assign out = "PIN_OSPEED_100M(" + port_name + "_" + name + ")" /]
[/#if]
[#if pin_index == 0]
[#assign line = "#define VAL_" + port_name + "_OSPEEDR (" + out /]
[#else]
[#assign line = " " + out /]
[/#if]
[#if pin_index < 15]
${(line + " |")?right_pad(76, " ") + "\\"}
[#else]
${line + ")"}
[/#if]
[/#list]
[#--
-- Generating PUPDR register value.
--]
[#list port.* as pin]
[#assign pin_name = pin?node_name?upper_case /]
[#assign name = pin.@ID[0]?string?trim /]
[#if name?length == 0]
[#assign name = pin_name /]
[/#if]
[#assign resistor = pin.@Resistor[0] /]
[#if resistor == "Floating"]
[#assign out = "PIN_PUPDR_FLOATING(" + port_name + "_" + name + ")" /]
[#elseif resistor == "PullUp"]
[#assign out = "PIN_PUPDR_PULLUP(" + port_name + "_" + name + ")" /]
[#else]
[#assign out = "PIN_PUPDR_PULLDOWN(" + port_name + "_" + name + ")" /]
[/#if]
[#if pin_index == 0]
[#assign line = "#define VAL_" + port_name + "_PUPDR (" + out /]
[#else]
[#assign line = " " + out /]
[/#if]
[#if pin_index < 15]
${(line + " |")?right_pad(76, " ") + "\\"}
[#else]
${line + ")"}
[/#if]
[/#list]
[#--
-- Generating ODR register value.
--]
[#list port.* as pin]
[#assign pin_name = pin?node_name?upper_case /]
[#assign name = pin.@ID[0]?string?trim /]
[#if name?length == 0]
[#assign name = pin_name /]
[/#if]
[#assign level = pin.@Level[0] /]
[#if level == "Low"]
[#assign out = "PIN_ODR_LOW(" + port_name + "_" + name + ")" /]
[#else]
[#assign out = "PIN_ODR_HIGH(" + port_name + "_" + name + ")" /]
[/#if]
[#if pin_index == 0]
[#assign line = "#define VAL_" + port_name + "_ODR (" + out /]
[#else]
[#assign line = " " + out /]
[/#if]
[#if pin_index < 15]
${(line + " |")?right_pad(76, " ") + "\\"}
[#else]
${line + ")"}
[/#if]
[/#list]
[#--
-- Generating AFRx registers values.
--]
[#list port.* as pin]
[#assign pin_name = pin?node_name?upper_case /]
[#assign name = pin.@ID[0]?string?trim /]
[#if name?length == 0]
[#assign name = pin_name /]
[/#if]
[#assign alternate = pin.@Alternate[0]?trim /]
[#assign out = "PIN_AFIO_AF(" + port_name + "_" + name + ", " + alternate + ")" /]
[#if pin_index == 0]
[#assign line = "#define VAL_" + port_name + "_AFRL (" + out /]
[#elseif pin_index == 8]
[#assign line = "#define VAL_" + port_name + "_AFRH (" + out /]
[#else]
[#assign line = " " + out /]
[/#if]
[#if (pin_index == 7) || (pin_index == 15)]
${line + ")"}
[#else]
${(line + " |")?right_pad(76, " ") + "\\"}
[/#if]
[/#list]
[/#list]
#if !defined(_FROM_ASM_)
#ifdef __cplusplus
extern "C" {
#endif
void boardInit(void);
#ifdef __cplusplus
}
#endif
#endif /* _FROM_ASM_ */
#endif /* _BOARD_H_ */
Reference in New Issue View Git Blame Copy Permalink