zcy
/
tinySA
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
tinySA/os/hal/platforms/SPC5xx/eMIOS200_v1/pwm_lld.c

962 lines
28 KiB
C
Raw Blame History

/*
SPC5 HAL - Copyright (C) 2013 STMicroelectronics
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/**
* @file SPC5xx/eMIOS200_v1/pwm_lld.c
* @brief SPC5xx low level pwm driver code.
*
* @addtogroup PWM
* @{
*/
#include "ch.h"
#include "hal.h"
#if HAL_USE_PWM || defined(__DOXYGEN__)
#include "spc5_emios.h"
/*===========================================================================*/
/* Driver local definitions. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver exported variables. */
/*===========================================================================*/
/**
* @brief PWMD1 driver identifier.
* @note The driver PWMD1 allocates the unified channel EMIOS_CH0
* when enabled.
*/
#if SPC5_PWM_USE_EMIOS_CH0 || defined(__DOXYGEN__)
PWMDriver PWMD1;
#endif
/**
* @brief PWMD2 driver identifier.
* @note The driver PWMD2 allocates the unified channel EMIOS_CH8
* when enabled.
*/
#if SPC5_PWM_USE_EMIOS_CH8 || defined(__DOXYGEN__)
PWMDriver PWMD2;
#endif
/**
* @brief PWMD3 driver identifier.
* @note The driver PWMD3 allocates the unified channel EMIOS_CH9
* when enabled.
*/
#if SPC5_PWM_USE_EMIOS_CH9 || defined(__DOXYGEN__)
PWMDriver PWMD3;
#endif
/**
* @brief PWMD4 driver identifier.
* @note The driver PWMD4 allocates the unified channel EMIOS_CH10
* when enabled.
*/
#if SPC5_PWM_USE_EMIOS_CH10 || defined(__DOXYGEN__)
PWMDriver PWMD4;
#endif
/**
* @brief PWMD5 driver identifier.
* @note The driver PWMD5 allocates the unified channel EMIOS_CH12
* when enabled.
*/
#if SPC5_PWM_USE_EMIOS_CH12 || defined(__DOXYGEN__)
PWMDriver PWMD5;
#endif
/**
* @brief PWMD6 driver identifier.
* @note The driver PWMD6 allocates the unified channel EMIOS_CH14
* when enabled.
*/
#if SPC5_PWM_USE_EMIOS_CH14 || defined(__DOXYGEN__)
PWMDriver PWMD6;
#endif
/**
* @brief PWMD7 driver identifier.
* @note The driver PWMD7 allocates the unified channel EMIOS_CH15
* when enabled.
*/
#if SPC5_PWM_USE_EMIOS_CH15 || defined(__DOXYGEN__)
PWMDriver PWMD7;
#endif
/**
* @brief PWMD8 driver identifier.
* @note The driver PWMD8 allocates the unified channel EMIOS_CH23
* when enabled.
*/
#if SPC5_PWM_USE_EMIOS_CH23 || defined(__DOXYGEN__)
PWMDriver PWMD8;
#endif
#if SPC5_EMIOS_NUM_CHANNELS == 24
/**
* @brief PWMD9 driver identifier.
* @note The driver PWMD9 allocates the unified channel EMIOS_CH19
* when enabled.
*/
#if SPC5_PWM_USE_EMIOS_CH19 || defined(__DOXYGEN__)
PWMDriver PWMD9;
#endif
/**
* @brief PWMD10 driver identifier.
* @note The driver PWMD10 allocates the unified channel EMIOS_CH20
* when enabled.
*/
#if SPC5_PWM_USE_EMIOS_CH20 || defined(__DOXYGEN__)
PWMDriver PWMD10;
#endif
/**
* @brief PWMD11 driver identifier.
* @note The driver PWMD11 allocates the unified channel EMIOS_CH21
* when enabled.
*/
#if SPC5_PWM_USE_EMIOS_CH21 || defined(__DOXYGEN__)
PWMDriver PWMD11;
#endif
/**
* @brief PWMD12 driver identifier.
* @note The driver PWMD12 allocates the unified channel EMIOS_CH22
* when enabled.
*/
#if SPC5_PWM_USE_EMIOS_CH22 || defined(__DOXYGEN__)
PWMDriver PWMD12;
#endif
#endif
/*===========================================================================*/
/* Driver local variables and types. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver local functions. */
/*===========================================================================*/
/**
* @brief PWM IRQ handler.
*
* @param[in] pwmp pointer to the @p PWMDriver object
*/
static void pwm_lld_serve_interrupt(PWMDriver *pwmp) {
uint32_t sr = pwmp->emiosp->CH[pwmp->ch_number].CSR.R;
if (sr && EMIOSS_OVFL) {
pwmp->emiosp->CH[pwmp->ch_number].CSR.R |= EMIOSS_OVFLC;
}
if (sr && EMIOSS_OVR) {
pwmp->emiosp->CH[pwmp->ch_number].CSR.R |= EMIOSS_OVRC;
}
if (sr && EMIOSS_FLAG) {
pwmp->emiosp->CH[pwmp->ch_number].CSR.R |= EMIOSS_FLAGC;
if (pwmp->config->channels[0].mode == PWM_OUTPUT_ACTIVE_HIGH) {
if (pwmp->emiosp->CH[pwmp->ch_number].CSR.B.UCOUT == 1U && \
pwmp->config->callback != NULL) {
pwmp->config->callback(pwmp);
} else if (pwmp->emiosp->CH[pwmp->ch_number].CSR.B.UCOUT == 0 && \
pwmp->config->channels[0].callback != NULL) {
pwmp->config->channels[0].callback(pwmp);
}
} else if (pwmp->config->channels[0].mode == PWM_OUTPUT_ACTIVE_LOW) {
if (pwmp->emiosp->CH[pwmp->ch_number].CSR.B.UCOUT == 0 && \
pwmp->config->callback != NULL) {
pwmp->config->callback(pwmp);
} else if (pwmp->emiosp->CH[pwmp->ch_number].CSR.B.UCOUT == 1U && \
pwmp->config->channels[0].callback != NULL) {
pwmp->config->channels[0].callback(pwmp);
}
}
}
}
/*===========================================================================*/
/* Driver interrupt handlers. */
/*===========================================================================*/
#if SPC5_PWM_USE_EMIOS_CH0
#if !defined(SPC5_EMIOS_FLAG_F0_HANDLER)
#error "SPC5_EMIOS_FLAG_F0_HANDLER not defined"
#endif
/**
* @brief EMIOS Channel 0 interrupt handler.
* @note It is assumed that the various sources are only activated if the
* associated callback pointer is not equal to @p NULL in order to not
* perform an extra check in a potentially critical interrupt handler.
*
* @isr
*/
CH_IRQ_HANDLER(SPC5_EMIOS_FLAG_F0_HANDLER) {
CH_IRQ_PROLOGUE();
pwm_lld_serve_interrupt(&PWMD1);
CH_IRQ_EPILOGUE();
}
#endif /* SPC5_PWM_USE_EMIOS_CH0 */
#if SPC5_PWM_USE_EMIOS_CH8
#if !defined(SPC5_EMIOS_FLAG_F8_HANDLER)
#error "SPC5_EMIOS_FLAG_F8_HANDLER not defined"
#endif
/**
* @brief EMIOS Channel 8 interrupt handler.
* @note It is assumed that the various sources are only activated if the
* associated callback pointer is not equal to @p NULL in order to not
* perform an extra check in a potentially critical interrupt handler.
*
* @isr
*/
CH_IRQ_HANDLER(SPC5_EMIOS_FLAG_F8_HANDLER) {
CH_IRQ_PROLOGUE();
pwm_lld_serve_interrupt(&PWMD2);
CH_IRQ_EPILOGUE();
}
#endif /* SPC5_PWM_USE_EMIOS_CH8 */
#if SPC5_PWM_USE_EMIOS_CH9
#if !defined(SPC5_EMIOS_FLAG_F9_HANDLER)
#error "SPC5_EMIOS_FLAG_F9_HANDLER not defined"
#endif
/**
* @brief EMIOS Channel 9 interrupt handler.
* @note It is assumed that the various sources are only activated if the
* associated callback pointer is not equal to @p NULL in order to not
* perform an extra check in a potentially critical interrupt handler.
*
* @isr
*/
CH_IRQ_HANDLER(SPC5_EMIOS_FLAG_F9_HANDLER) {
CH_IRQ_PROLOGUE();
pwm_lld_serve_interrupt(&PWMD3);
CH_IRQ_EPILOGUE();
}
#endif /* SPC5_PWM_USE_EMIOS_CH9 */
#if SPC5_PWM_USE_EMIOS_CH10
#if !defined(SPC5_EMIOS_FLAG_F10_HANDLER)
#error "SPC5_EMIOS_FLAG_F10_HANDLER not defined"
#endif
/**
* @brief EMIOS Channel 10 interrupt handler.
* @note It is assumed that the various sources are only activated if the
* associated callback pointer is not equal to @p NULL in order to not
* perform an extra check in a potentially critical interrupt handler.
*
* @isr
*/
CH_IRQ_HANDLER(SPC5_EMIOS_FLAG_F10_HANDLER) {
CH_IRQ_PROLOGUE();
pwm_lld_serve_interrupt(&PWMD4);
CH_IRQ_EPILOGUE();
}
#endif /* SPC5_PWM_USE_EMIOS_CH10 */
#if SPC5_PWM_USE_EMIOS_CH12
#if !defined(SPC5_EMIOS_FLAG_F12_HANDLER)
#error "SPC5_EMIOS_FLAG_F12_HANDLER not defined"
#endif
/**
* @brief EMIOS Channel 12 interrupt handler.
* @note It is assumed that the various sources are only activated if the
* associated callback pointer is not equal to @p NULL in order to not
* perform an extra check in a potentially critical interrupt handler.
*
* @isr
*/
CH_IRQ_HANDLER(SPC5_EMIOS_FLAG_F12_HANDLER) {
CH_IRQ_PROLOGUE();
pwm_lld_serve_interrupt(&PWMD5);
CH_IRQ_EPILOGUE();
}
#endif /* SPC5_PWM_USE_EMIOS_CH12 */
#if SPC5_PWM_USE_EMIOS_CH14
#if !defined(SPC5_EMIOS_FLAG_F14_HANDLER)
#error "SPC5_EMIOS_FLAG_F14_HANDLER not defined"
#endif
/**
* @brief EMIOS Channel 14 interrupt handler.
* @note It is assumed that the various sources are only activated if the
* associated callback pointer is not equal to @p NULL in order to not
* perform an extra check in a potentially critical interrupt handler.
*
* @isr
*/
CH_IRQ_HANDLER(SPC5_EMIOS_FLAG_F14_HANDLER) {
CH_IRQ_PROLOGUE();
pwm_lld_serve_interrupt(&PWMD6);
CH_IRQ_EPILOGUE();
}
#endif /* SPC5_PWM_USE_EMIOS_CH14 */
#if SPC5_PWM_USE_EMIOS_CH15
#if !defined(SPC5_EMIOS_FLAG_F15_HANDLER)
#error "SPC5_EMIOS_FLAG_F15_HANDLER not defined"
#endif
/**
* @brief EMIOS Channel 15 interrupt handler.
* @note It is assumed that the various sources are only activated if the
* associated callback pointer is not equal to @p NULL in order to not
* perform an extra check in a potentially critical interrupt handler.
*
* @isr
*/
CH_IRQ_HANDLER(SPC5_EMIOS_FLAG_F15_HANDLER) {
CH_IRQ_PROLOGUE();
pwm_lld_serve_interrupt(&PWMD7);
CH_IRQ_EPILOGUE();
}
#endif /* SPC5_PWM_USE_EMIOS_CH15 */
#if SPC5_PWM_USE_EMIOS_CH23
#if !defined(SPC5_EMIOS_FLAG_F23_HANDLER)
#error "SPC5_EMIOS_FLAG_F23_HANDLER not defined"
#endif
/**
* @brief EMIOS Channel 23 interrupt handler.
* @note It is assumed that the various sources are only activated if the
* associated callback pointer is not equal to @p NULL in order to not
* perform an extra check in a potentially critical interrupt handler.
*
* @isr
*/
CH_IRQ_HANDLER(SPC5_EMIOS_FLAG_F23_HANDLER) {
CH_IRQ_PROLOGUE();
pwm_lld_serve_interrupt(&PWMD8);
CH_IRQ_EPILOGUE();
}
#endif /* SPC5_PWM_USE_EMIOS_CH23 */
#if SPC5_EMIOS_NUM_CHANNELS == 24
#if SPC5_PWM_USE_EMIOS_CH19
#if !defined(SPC5_EMIOS_FLAG_F19_HANDLER)
#error "SPC5_EMIOS_FLAG_F19_HANDLER not defined"
#endif
/**
* @brief EMIOS Channel 19 interrupt handler.
* @note It is assumed that the various sources are only activated if the
* associated callback pointer is not equal to @p NULL in order to not
* perform an extra check in a potentially critical interrupt handler.
*
* @isr
*/
CH_IRQ_HANDLER(SPC5_EMIOS_FLAG_F19_HANDLER) {
CH_IRQ_PROLOGUE();
pwm_lld_serve_interrupt(&PWMD9);
CH_IRQ_EPILOGUE();
}
#endif /* SPC5_PWM_USE_EMIOS_CH19 */
#if SPC5_PWM_USE_EMIOS_CH20
#if !defined(SPC5_EMIOS_FLAG_F20_HANDLER)
#error "SPC5_EMIOS_FLAG_F20_HANDLER not defined"
#endif
/**
* @brief EMIOS Channel 20 interrupt handler.
* @note It is assumed that the various sources are only activated if the
* associated callback pointer is not equal to @p NULL in order to not
* perform an extra check in a potentially critical interrupt handler.
*
* @isr
*/
CH_IRQ_HANDLER(SPC5_EMIOS_FLAG_F20_HANDLER) {
CH_IRQ_PROLOGUE();
pwm_lld_serve_interrupt(&PWMD10);
CH_IRQ_EPILOGUE();
}
#endif /* SPC5_PWM_USE_EMIOS_CH20 */
#if SPC5_PWM_USE_EMIOS_CH21
#if !defined(SPC5_EMIOS_FLAG_F21_HANDLER)
#error "SPC5_EMIOS_FLAG_F21_HANDLER not defined"
#endif
/**
* @brief EMIOS Channel 21 interrupt handler.
* @note It is assumed that the various sources are only activated if the
* associated callback pointer is not equal to @p NULL in order to not
* perform an extra check in a potentially critical interrupt handler.
*
* @isr
*/
CH_IRQ_HANDLER(SPC5_EMIOS_FLAG_F21_HANDLER) {
CH_IRQ_PROLOGUE();
pwm_lld_serve_interrupt(&PWMD11);
CH_IRQ_EPILOGUE();
}
#endif /* SPC5_PWM_USE_EMIOS_CH21 */
#if SPC5_PWM_USE_EMIOS_CH22
#if !defined(SPC5_EMIOS_FLAG_F22_HANDLER)
#error "SPC5_EMIOS_FLAG_F22_HANDLER not defined"
#endif
/**
* @brief EMIOS Channel 22 interrupt handler.
* @note It is assumed that the various sources are only activated if the
* associated callback pointer is not equal to @p NULL in order to not
* perform an extra check in a potentially critical interrupt handler.
*
* @isr
*/
CH_IRQ_HANDLER(SPC5_EMIOS_FLAG_F22_HANDLER) {
CH_IRQ_PROLOGUE();
pwm_lld_serve_interrupt(&PWMD12);
CH_IRQ_EPILOGUE();
}
#endif /* SPC5_PWM_USE_EMIOS_CH22 */
#endif
/*===========================================================================*/
/* Driver exported functions. */
/*===========================================================================*/
/**
* @brief Low level PWM driver initialization.
*
* @notapi
*/
void pwm_lld_init(void) {
/* eMIOSx channels initially all not in use.*/
reset_emios_active_channels();
#if SPC5_PWM_USE_EMIOS_CH0
/* Driver initialization.*/
pwmObjectInit(&PWMD1);
PWMD1.emiosp = &EMIOS;
PWMD1.ch_number = 0U;
#endif /* SPC5_PWM_USE_EMIOS_CH0 */
#if SPC5_PWM_USE_EMIOS_CH8
/* Driver initialization.*/
pwmObjectInit(&PWMD2);
PWMD2.emiosp = &EMIOS;
PWMD2.ch_number = 8U;
#endif /* SPC5_PWM_USE_EMIOS_CH8 */
#if SPC5_PWM_USE_EMIOS_CH9
/* Driver initialization.*/
pwmObjectInit(&PWMD3);
PWMD3.emiosp = &EMIOS;
PWMD3.ch_number = 9U;
#endif /* SPC5_PWM_USE_EMIOS_CH9 */
#if SPC5_PWM_USE_EMIOS_CH10
/* Driver initialization.*/
pwmObjectInit(&PWMD4);
PWMD4.emiosp = &EMIOS;
PWMD4.ch_number = 10U;
#endif /* SPC5_PWM_USE_EMIOS_CH10 */
#if SPC5_PWM_USE_EMIOS_CH12
/* Driver initialization.*/
pwmObjectInit(&PWMD5);
PWMD5.emiosp = &EMIOS;
PWMD5.ch_number = 12U;
#endif /* SPC5_PWM_USE_EMIOS_CH12 */
#if SPC5_PWM_USE_EMIOS_CH14
/* Driver initialization.*/
pwmObjectInit(&PWMD6);
PWMD6.emiosp = &EMIOS;
PWMD6.ch_number = 14U;
#endif /* SPC5_PWM_USE_EMIOS_CH14 */
#if SPC5_PWM_USE_EMIOS_CH15
/* Driver initialization.*/
pwmObjectInit(&PWMD7);
PWMD7.emiosp = &EMIOS;
PWMD7.ch_number = 15U;
#endif /* SPC5_PWM_USE_EMIOS_CH15 */
#if SPC5_PWM_USE_EMIOS_CH23
/* Driver initialization.*/
pwmObjectInit(&PWMD8);
PWMD8.emiosp = &EMIOS;
PWMD8.ch_number = 23U;
#endif /* SPC5_PWM_USE_EMIOS_CH23 */
#if SPC5_EMIOS_NUM_CHANNELS == 24
#if SPC5_PWM_USE_EMIOS_CH19
/* Driver initialization.*/
pwmObjectInit(&PWMD9);
PWMD9.emiosp = &EMIOS;
PWMD9.ch_number = 19U;
#endif /* SPC5_PWM_USE_EMIOS_CH19 */
#if SPC5_PWM_USE_EMIOS_CH20
/* Driver initialization.*/
pwmObjectInit(&PWMD10);
PWMD10.emiosp = &EMIOS;
PWMD10.ch_number = 20U;
#endif /* SPC5_PWM_USE_EMIOS_CH20 */
#if SPC5_PWM_USE_EMIOS_CH21
/* Driver initialization.*/
pwmObjectInit(&PWMD11);
PWMD11.emiosp = &EMIOS;
PWMD11.ch_number = 21U;
#endif /* SPC5_PWM_USE_EMIOS_CH21 */
#if SPC5_PWM_USE_EMIOS_CH22
/* Driver initialization.*/
pwmObjectInit(&PWMD12);
PWMD12.emiosp = &EMIOS;
PWMD12.ch_number = 22U;
#endif /* SPC5_PWM_USE_EMIOS_CH22 */
#endif
#if SPC5_PWM_USE_EMIOS
#if SPC5_EMIOS_NUM_CHANNELS == 16
INTC.PSR[SPC5_EMIOS_FLAG_F0_NUMBER].R = SPC5_EMIOS_FLAG_F0_PRIORITY;
INTC.PSR[SPC5_EMIOS_FLAG_F8_NUMBER].R = SPC5_EMIOS_FLAG_F8_PRIORITY;
INTC.PSR[SPC5_EMIOS_FLAG_F9_NUMBER].R = SPC5_EMIOS_FLAG_F9_PRIORITY;
INTC.PSR[SPC5_EMIOS_FLAG_F10_NUMBER].R = SPC5_EMIOS_FLAG_F10_PRIORITY;
INTC.PSR[SPC5_EMIOS_FLAG_F12_NUMBER].R = SPC5_EMIOS_FLAG_F12_PRIORITY;
INTC.PSR[SPC5_EMIOS_FLAG_F14_NUMBER].R = SPC5_EMIOS_FLAG_F14_PRIORITY;
INTC.PSR[SPC5_EMIOS_FLAG_F15_NUMBER].R = SPC5_EMIOS_FLAG_F15_PRIORITY;
INTC.PSR[SPC5_EMIOS_FLAG_F23_NUMBER].R = SPC5_EMIOS_FLAG_F23_PRIORITY;
#endif
#if SPC5_EMIOS_NUM_CHANNELS == 24
INTC.PSR[SPC5_EMIOS_FLAG_F0_NUMBER].R = SPC5_EMIOS_FLAG_F0_PRIORITY;
INTC.PSR[SPC5_EMIOS_FLAG_F8_NUMBER].R = SPC5_EMIOS_FLAG_F8_PRIORITY;
INTC.PSR[SPC5_EMIOS_FLAG_F9_NUMBER].R = SPC5_EMIOS_FLAG_F9_PRIORITY;
INTC.PSR[SPC5_EMIOS_FLAG_F10_NUMBER].R = SPC5_EMIOS_FLAG_F10_PRIORITY;
INTC.PSR[SPC5_EMIOS_FLAG_F12_NUMBER].R = SPC5_EMIOS_FLAG_F12_PRIORITY;
INTC.PSR[SPC5_EMIOS_FLAG_F14_NUMBER].R = SPC5_EMIOS_FLAG_F14_PRIORITY;
INTC.PSR[SPC5_EMIOS_FLAG_F15_NUMBER].R = SPC5_EMIOS_FLAG_F15_PRIORITY;
INTC.PSR[SPC5_EMIOS_FLAG_F19_NUMBER].R = SPC5_EMIOS_FLAG_F19_PRIORITY;
INTC.PSR[SPC5_EMIOS_FLAG_F20_NUMBER].R = SPC5_EMIOS_FLAG_F20_PRIORITY;
INTC.PSR[SPC5_EMIOS_FLAG_F21_NUMBER].R = SPC5_EMIOS_FLAG_F21_PRIORITY;
INTC.PSR[SPC5_EMIOS_FLAG_F22_NUMBER].R = SPC5_EMIOS_FLAG_F22_PRIORITY;
INTC.PSR[SPC5_EMIOS_FLAG_F23_NUMBER].R = SPC5_EMIOS_FLAG_F23_PRIORITY;
#endif
#endif
}
/**
* @brief Configures and activates the PWM peripheral.
*
* @param[in] pwmp pointer to the @p PWMDriver object
*
* @notapi
*/
void pwm_lld_start(PWMDriver *pwmp) {
uint32_t psc = 0;
chDbgAssert(get_emios_active_channels() < SPC5_EMIOS_NUM_CHANNELS,
"pwm_lld_start(), #1", "too many channels");
if (pwmp->state == PWM_STOP) {
#if SPC5_PWM_USE_EMIOS_CH0
if (&PWMD1 == pwmp) {
increase_emios_active_channels();
}
#endif /* SPC5_PWM_USE_EMIOS_CH0 */
#if SPC5_PWM_USE_EMIOS_CH8
if (&PWMD2 == pwmp) {
increase_emios_active_channels();
}
#endif /* SPC5_PWM_USE_EMIOS_CH8 */
#if SPC5_PWM_USE_EMIOS_CH9
if (&PWMD3 == pwmp) {
increase_emios_active_channels();
}
#endif /* SPC5_PWM_USE_EMIOS_CH9 */
#if SPC5_PWM_USE_EMIOS_CH10
if (&PWMD4 == pwmp) {
increase_emios_active_channels();
}
#endif /* SPC5_PWM_USE_EMIOS_CH10 */
#if SPC5_PWM_USE_EMIOS_CH12
if (&PWMD5 == pwmp) {
increase_emios_active_channels();
}
#endif /* SPC5_PWM_USE_EMIOS_CH12 */
#if SPC5_PWM_USE_EMIOS_CH14
if (&PWMD6 == pwmp) {
increase_emios_active_channels();
}
#endif /* SPC5_PWM_USE_EMIOS_CH14 */
#if SPC5_PWM_USE_EMIOS_CH15
if (&PWMD7 == pwmp) {
increase_emios_active_channels();
}
#endif /* SPC5_PWM_USE_EMIOS_CH15 */
#if SPC5_PWM_USE_EMIOS_CH23
if (&PWMD8 == pwmp) {
increase_emios_active_channels();
}
#endif /* SPC5_PWM_USE_EMIOS_CH23 */
#if SPC5_EMIOS_NUM_CHANNELS == 24
#if SPC5_PWM_USE_EMIOS_CH19
if (&PWMD9 == pwmp) {
increase_emios_active_channels();
}
#endif /* SPC5_PWM_USE_EMIOS_CH19 */
#if SPC5_PWM_USE_EMIOS_CH20
if (&PWMD10 == pwmp) {
increase_emios_active_channels();
}
#endif /* SPC5_PWM_USE_EMIOS_CH20 */
#if SPC5_PWM_USE_EMIOS_CH21
if (&PWMD11 == pwmp) {
increase_emios_active_channels();
}
#endif /* SPC5_PWM_USE_EMIOS_CH21 */
#if SPC5_PWM_USE_EMIOS_CH22
if (&PWMD12 == pwmp) {
increase_emios_active_channels();
}
#endif /* SPC5_PWM_USE_EMIOS_CH22 */
#endif
/* Set eMIOS Clock.*/
#if SPC5_PWM_USE_EMIOS
active_emios_clock(NULL, pwmp);
#endif
}
/* Configures the peripheral.*/
/* Channel enables.*/
pwmp->emiosp->UCDIS.R &= ~(1 << pwmp->ch_number);
/* Clear pending IRQs (if any).*/
pwmp->emiosp->CH[pwmp->ch_number].CSR.R = EMIOSS_OVRC |
EMIOSS_OVFLC | EMIOSS_FLAGC;
/* Set clock prescaler and control register.*/
psc = (SPC5_EMIOS_CLK / pwmp->config->frequency);
chDbgAssert((psc <= 0xFFFF) &&
(((psc) * pwmp->config->frequency) == SPC5_EMIOS_CLK) &&
((psc == 1) || (psc == 2) || (psc == 3) || (psc == 4)),
"pwm_lld_start(), #1", "invalid frequency");
if (pwmp->config->mode == PWM_ALIGN_EDGE) {
pwmp->emiosp->CH[pwmp->ch_number].CCR.B.UCPREN = 0;
pwmp->emiosp->CH[pwmp->ch_number].CCR.B.UCPRE = psc - 1U;
pwmp->emiosp->CH[pwmp->ch_number].CCR.B.UCPREN = 1U;
pwmp->emiosp->CH[pwmp->ch_number].CCNTR.R = 1U;
pwmp->emiosp->CH[pwmp->ch_number].CADR.R = 0U;
pwmp->emiosp->CH[pwmp->ch_number].CBDR.R = pwmp->config->period;
pwmp->emiosp->CH[pwmp->ch_number].CCR.R |=
EMIOSC_BSL(EMIOS_BSL_INTERNAL_COUNTER) | EMIOS_CCR_MODE_OPWFMB | 2U;
pwmp->emiosp->CH[pwmp->ch_number].CCR.R |= EMIOSC_UCPREN;
/* Set output polarity.*/
if (pwmp->config->channels[0].mode == PWM_OUTPUT_ACTIVE_LOW) {
pwmp->emiosp->CH[pwmp->ch_number].CCR.R |= EMIOSC_EDPOL;
} else if (pwmp->config->channels[0].mode == PWM_OUTPUT_ACTIVE_HIGH) {
pwmp->emiosp->CH[pwmp->ch_number].CCR.R &= ~EMIOSC_EDPOL;
}
/* Channel disables.*/
pwmp->emiosp->UCDIS.R |= (1 << pwmp->ch_number);
} else if (pwmp->config->mode == PWM_ALIGN_CENTER) {
/* Not implemented.*/
}
}
/**
* @brief Deactivates the PWM peripheral.
*
* @param[in] pwmp pointer to the @p PWMDriver object
*
* @notapi
*/
void pwm_lld_stop(PWMDriver *pwmp) {
chDbgAssert(get_emios_active_channels() < SPC5_EMIOS_NUM_CHANNELS,
"pwm_lld_stop(), #1", "too many channels");
if (pwmp->state == PWM_READY) {
/* Disables the peripheral.*/
#if SPC5_PWM_USE_EMIOS_CH0
if (&PWMD1 == pwmp) {
/* Reset UC Control Register.*/
pwmp->emiosp->CH[pwmp->ch_number].CCR.R = 0;
decrease_emios_active_channels();
}
#endif /* SPC5_PWM_USE_EMIOS_CH0 */
#if SPC5_PWM_USE_EMIOS_CH8
if (&PWMD2 == pwmp) {
/* Reset UC Control Register.*/
pwmp->emiosp->CH[pwmp->ch_number].CCR.R = 0;
decrease_emios_active_channels();
}
#endif /* SPC5_PWM_USE_EMIOS_CH8 */
#if SPC5_PWM_USE_EMIOS_CH9
if (&PWMD3 == pwmp) {
/* Reset UC Control Register.*/
pwmp->emiosp->CH[pwmp->ch_number].CCR.R = 0;
decrease_emios_active_channels();
}
#endif /* SPC5_PWM_USE_EMIOS_CH9 */
#if SPC5_PWM_USE_EMIOS_CH10
if (&PWMD4 == pwmp) {
/* Reset UC Control Register.*/
pwmp->emiosp->CH[pwmp->ch_number].CCR.R = 0;
decrease_emios_active_channels();
}
#endif /* SPC5_PWM_USE_EMIOS_CH10 */
#if SPC5_PWM_USE_EMIOS_CH12
if (&PWMD5 == pwmp) {
/* Reset UC Control Register.*/
pwmp->emiosp->CH[pwmp->ch_number].CCR.R = 0;
decrease_emios_active_channels();
}
#endif /* SPC5_PWM_USE_EMIOS_CH12 */
#if SPC5_PWM_USE_EMIOS_CH14
if (&PWMD6 == pwmp) {
/* Reset UC Control Register.*/
pwmp->emiosp->CH[pwmp->ch_number].CCR.R = 0;
decrease_emios_active_channels();
}
#endif /* SPC5_PWM_USE_EMIOS_CH14 */
#if SPC5_PWM_USE_EMIOS_CH15
if (&PWMD7 == pwmp) {
/* Reset UC Control Register.*/
pwmp->emiosp->CH[pwmp->ch_number].CCR.R = 0;
decrease_emios_active_channels();
}
#endif /* SPC5_PWM_USE_EMIOS_CH15 */
#if SPC5_PWM_USE_EMIOS_CH23
if (&PWMD8 == pwmp) {
/* Reset UC Control Register.*/
pwmp->emiosp->CH[pwmp->ch_number].CCR.R = 0;
decrease_emios_active_channels();
}
#endif /* SPC5_PWM_USE_EMIOS_CH23 */
#if SPC5_EMIOS_NUM_CHANNELS == 24
#if SPC5_PWM_USE_EMIOS_CH19
if (&PWMD9 == pwmp) {
/* Reset UC Control Register.*/
pwmp->emiosp->CH[pwmp->ch_number].CCR.R = 0;
decrease_emios_active_channels();
}
#endif /* SPC5_PWM_USE_EMIOS_CH19 */
#if SPC5_PWM_USE_EMIOS_CH20
if (&PWMD10 == pwmp) {
/* Reset UC Control Register.*/
pwmp->emiosp->CH[pwmp->ch_number].CCR.R = 0;
decrease_emios_active_channels();
}
#endif /* SPC5_PWM_USE_EMIOS_CH20 */
#if SPC5_PWM_USE_EMIOS_CH21
if (&PWMD11 == pwmp) {
/* Reset UC Control Register.*/
pwmp->emiosp->CH[pwmp->ch_number].CCR.R = 0;
decrease_emios_active_channels();
}
#endif /* SPC5_PWM_USE_EMIOS_CH21 */
#if SPC5_PWM_USE_EMIOS_CH22
if (&PWMD12 == pwmp) {
/* Reset UC Control Register.*/
pwmp->emiosp->CH[pwmp->ch_number].CCR.R = 0;
decrease_emios_active_channels();
}
#endif /* SPC5_PWM_USE_EMIOS_CH22 */
#endif
/* eMIOS clock deactivation.*/
#if SPC5_PWM_USE_EMIOS
deactive_emios_clock();
#endif
}
}
/**
* @brief Changes the period the PWM peripheral.
* @details This function changes the period of a PWM unit that has already
* been activated using @p pwmStart().
* @pre The PWM unit must have been activated using @p pwmStart().
* @post The PWM unit period is changed to the new value.
* @note The function has effect at the next cycle start.
* @note If a period is specified that is shorter than the pulse width
* programmed in one of the channels then the behavior is not
* guaranteed.
*
* @param[in] pwmp pointer to a @p PWMDriver object
* @param[in] period new cycle time in ticks
*
* @notapi
*/
void pwm_lld_change_period(PWMDriver *pwmp, pwmcnt_t period) {
pwmp->period = period;
pwmp->emiosp->CH[pwmp->ch_number].CBDR.R = period;
}
/**
* @brief Enables a PWM channel.
* @pre The PWM unit must have been activated using @p pwmStart().
* @post The channel is active using the specified configuration.
* @note Depending on the hardware implementation this function has
* effect starting on the next cycle (recommended implementation)
* or immediately (fallback implementation).
*
* @param[in] pwmp pointer to a @p PWMDriver object
* @param[in] channel PWM channel identifier (0...PWM_CHANNELS-1)
* @param[in] width PWM pulse width as clock pulses number
*
* @notapi
*/
void pwm_lld_enable_channel(PWMDriver *pwmp,
pwmchannel_t channel,
pwmcnt_t width) {
(void)channel;
/* Clear pending IRQs (if any).*/
pwmp->emiosp->CH[pwmp->ch_number].CSR.R = EMIOSS_OVRC |
EMIOSS_OVFLC | EMIOSS_FLAGC;
/* Set pwm width.*/
pwmp->emiosp->CH[pwmp->ch_number].CADR.R = width;
/* Active interrupts.*/
if (pwmp->config->callback != NULL || \
pwmp->config->channels[0].callback != NULL) {
pwmp->emiosp->CH[pwmp->ch_number].CCR.B.FEN = 1U;
}
/* Channel enables.*/
pwmp->emiosp->UCDIS.R &= ~(1 << pwmp->ch_number);
}
/**
* @brief Disables a PWM channel.
* @pre The PWM unit must have been activated using @p pwmStart().
* @post The channel is disabled and its output line returned to the
* idle state.
* @note Depending on the hardware implementation this function has
* effect starting on the next cycle (recommended implementation)
* or immediately (fallback implementation).
*
* @param[in] pwmp pointer to a @p PWMDriver object
* @param[in] channel PWM channel identifier (0...PWM_CHANNELS-1)
*
* @notapi
*/
void pwm_lld_disable_channel(PWMDriver *pwmp, pwmchannel_t channel) {
(void)channel;
/* Clear pending IRQs (if any).*/
pwmp->emiosp->CH[pwmp->ch_number].CSR.R = EMIOSS_OVRC |
EMIOSS_OVFLC | EMIOSS_FLAGC;
/* Disable interrupts.*/
pwmp->emiosp->CH[pwmp->ch_number].CCR.B.FEN = 0;
/* Channel disables.*/
pwmp->emiosp->UCDIS.R |= (1 << pwmp->ch_number);
}
#endif /* HAL_USE_PWM */
/** @} */
Reference in New Issue View Git Blame Copy Permalink