tinySA/os/hal/platforms/STM32/sdc_lld.h

153 lines
4.7 KiB
C

/*
ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
2011 Giovanni Di Sirio.
This file is part of ChibiOS/RT.
ChibiOS/RT is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
ChibiOS/RT is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/**
* @file STM32/sdc_lld.h
* @brief STM32 SDC subsystem low level driver header.
*
* @addtogroup SDC
* @{
*/
#ifndef _SDC_LLD_H_
#define _SDC_LLD_H_
#if HAL_USE_SDC || defined(__DOXYGEN__)
/*===========================================================================*/
/* Driver constants. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver pre-compile time settings. */
/*===========================================================================*/
/**
* @brief SDIO DMA priority (0..3|lowest..highest).
*/
#if !defined(STM32_SDC_SDIO_DMA_PRIORITY) || defined(__DOXYGEN__)
#define STM32_SDC_SDIO_DMA_PRIORITY 2
#endif
/**
* @brief SDIO interrupt priority level setting.
*/
#if !defined(STM32_SDC_SDIO_IRQ_PRIORITY) || defined(__DOXYGEN__)
#define STM32_SDC_SDIO_IRQ_PRIORITY 9
#endif
/**
* @brief SDIO DMA error hook.
* @note The default action for DMA errors is a system halt because DMA
* error can only happen because programming errors.
*/
#if !defined(STM32_SDC_DMA_ERROR_HOOK) || defined(__DOXYGEN__)
#define STM32_SDC_DMA_ERROR_HOOK(sdcp) chSysHalt()
#endif
/*===========================================================================*/
/* Derived constants and error checks. */
/*===========================================================================*/
#if !STM32_HAS_SDIO
#error "SDIO not present in the selected device"
#endif
#if !defined(STM32_DMA_REQUIRED)
#define STM32_DMA_REQUIRED
#endif
/*
* SDIO clock divider.
*/
#if STM32_HCLK > 48000000
#define STM32_SDIO_DIV_HS 0x01
#define STM32_SDIO_DIV_LS 0xB2
#else
#define STM32_SDIO_DIV_HS 0x00
#define STM32_SDIO_DIV_LS 0x76
#endif
/*===========================================================================*/
/* Driver data structures and types. */
/*===========================================================================*/
/**
* @brief Type of a structure representing an SDC driver.
*/
typedef struct SDCDriver SDCDriver;
/**
* @brief Driver configuration structure.
* @note It could be empty on some architectures.
*/
typedef struct {
} SDCConfig;
/**
* @brief Structure representing an SDC driver.
*/
struct SDCDriver {
/**
* @brief Driver state.
*/
sdcstate_t state;
/**
* @brief Current configuration data.
*/
const SDCConfig *config;
/* End of the mandatory fields.*/
};
/*===========================================================================*/
/* Driver macros. */
/*===========================================================================*/
/*===========================================================================*/
/* External declarations. */
/*===========================================================================*/
#if !defined(__DOXYGEN__)
extern SDCDriver SDCD1;
#endif
#ifdef __cplusplus
extern "C" {
#endif
void sdc_lld_init(void);
void sdc_lld_start(SDCDriver *sdcp);
void sdc_lld_stop(SDCDriver *sdcp);
void sdc_lld_send_cmd_none(SDCDriver *sdcp, uint8_t cmd, uint32_t arg);
bool_t sdc_lld_send_cmd_short(SDCDriver *sdcp, uint8_t cmd, uint32_t arg,
uint32_t *resp);
bool_t sdc_lld_send_cmd_long(SDCDriver *sdcp, uint8_t cmd, uint32_t arg,
uint32_t *resp);
#ifdef __cplusplus
}
#endif
#endif /* HAL_USE_SDC */
#endif /* _SDC_LLD_H_ */
/** @} */