zcy
/
tinySA
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
tinySA/os/hal/ports/STM32L1xx/adc_lld.c

281 lines
8.8 KiB
C
Raw Blame History

/*
ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/**
* @file STM32L1xx/adc_lld.c
* @brief STM32L1xx ADC subsystem low level driver source.
*
* @addtogroup ADC
* @{
*/
#include "hal.h"
#if HAL_USE_ADC || defined(__DOXYGEN__)
/*===========================================================================*/
/* Driver local definitions. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver exported variables. */
/*===========================================================================*/
/** @brief ADC1 driver identifier.*/
#if STM32_ADC_USE_ADC1 || defined(__DOXYGEN__)
ADCDriver ADCD1;
#endif
/*===========================================================================*/
/* Driver local variables and types. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver local functions. */
/*===========================================================================*/
/**
* @brief ADC DMA ISR service routine.
*
* @param[in] adcp pointer to the @p ADCDriver object
* @param[in] flags pre-shifted content of the ISR register
*/
static void adc_lld_serve_rx_interrupt(ADCDriver *adcp, uint32_t flags) {
/* DMA errors handling.*/
if ((flags & (STM32_DMA_ISR_TEIF | STM32_DMA_ISR_DMEIF)) != 0) {
/* DMA, this could help only if the DMA tries to access an unmapped
address space or violates alignment rules.*/
_adc_isr_error_code(adcp, ADC_ERR_DMAFAILURE);
}
else {
/* It is possible that the conversion group has already be reset by the
ADC error handler, in this case this interrupt is spurious.*/
if (adcp->grpp != NULL) {
if ((flags & STM32_DMA_ISR_HTIF) != 0) {
/* Half transfer processing.*/
_adc_isr_half_code(adcp);
}
if ((flags & STM32_DMA_ISR_TCIF) != 0) {
/* Transfer complete processing.*/
_adc_isr_full_code(adcp);
}
}
}
}
/*===========================================================================*/
/* Driver interrupt handlers. */
/*===========================================================================*/
#if STM32_ADC_USE_ADC1 || defined(__DOXYGEN__)
/**
* @brief ADC interrupt handler.
*
* @isr
*/
OSAL_IRQ_HANDLER(Vector88) {
uint32_t sr;
OSAL_IRQ_PROLOGUE();
sr = ADC1->SR;
ADC1->SR = 0;
/* Note, an overflow may occur after the conversion ended before the driver
is able to stop the ADC, this is why the DMA channel is checked too.*/
if ((sr & ADC_SR_OVR) && (dmaStreamGetTransactionSize(ADCD1.dmastp) > 0)) {
/* ADC overflow condition, this could happen only if the DMA is unable
to read data fast enough.*/
if (ADCD1.grpp != NULL)
_adc_isr_error_code(&ADCD1, ADC_ERR_OVERFLOW);
}
/* TODO: Add here analog watchdog handling.*/
OSAL_IRQ_EPILOGUE();
}
#endif
/*===========================================================================*/
/* Driver exported functions. */
/*===========================================================================*/
/**
* @brief Low level ADC driver initialization.
*
* @notapi
*/
void adc_lld_init(void) {
#if STM32_ADC_USE_ADC1
/* Driver initialization.*/
adcObjectInit(&ADCD1);
ADCD1.adc = ADC1;
ADCD1.dmastp = STM32_DMA1_STREAM1;
ADCD1.dmamode = STM32_DMA_CR_PL(STM32_ADC_ADC1_DMA_PRIORITY) |
STM32_DMA_CR_DIR_P2M |
STM32_DMA_CR_MSIZE_HWORD | STM32_DMA_CR_PSIZE_HWORD |
STM32_DMA_CR_MINC | STM32_DMA_CR_TCIE |
STM32_DMA_CR_DMEIE | STM32_DMA_CR_TEIE;
#endif
/* The shared vector is initialized on driver initialization and never
disabled.*/
nvicEnableVector(ADC1_IRQn, STM32_ADC_IRQ_PRIORITY);
}
/**
* @brief Configures and activates the ADC peripheral.
*
* @param[in] adcp pointer to the @p ADCDriver object
*
* @notapi
*/
void adc_lld_start(ADCDriver *adcp) {
/* If in stopped state then enables the ADC and DMA clocks.*/
if (adcp->state == ADC_STOP) {
#if STM32_ADC_USE_ADC1
if (&ADCD1 == adcp) {
bool b = dmaStreamAllocate(adcp->dmastp,
STM32_ADC_ADC1_DMA_IRQ_PRIORITY,
(stm32_dmaisr_t)adc_lld_serve_rx_interrupt,
(void *)adcp);
osalDbgAssert(!b, "stream already allocated");
dmaStreamSetPeripheral(adcp->dmastp, &ADC1->DR);
rccEnableADC1(FALSE);
}
#endif /* STM32_ADC_USE_ADC1 */
/* ADC initial setup, starting the analog part here in order to reduce
the latency when starting a conversion.*/
adcp->adc->CR1 = 0;
adcp->adc->CR2 = 0;
adcp->adc->CR2 = ADC_CR2_ADON;
}
}
/**
* @brief Deactivates the ADC peripheral.
*
* @param[in] adcp pointer to the @p ADCDriver object
*
* @notapi
*/
void adc_lld_stop(ADCDriver *adcp) {
/* If in ready state then disables the ADC clock and analog part.*/
if (adcp->state == ADC_READY) {
dmaStreamRelease(adcp->dmastp);
adcp->adc->CR1 = 0;
adcp->adc->CR2 = 0;
#if STM32_ADC_USE_ADC1
if (&ADCD1 == adcp)
rccDisableADC1(FALSE);
#endif
}
}
/**
* @brief Starts an ADC conversion.
*
* @param[in] adcp pointer to the @p ADCDriver object
*
* @notapi
*/
void adc_lld_start_conversion(ADCDriver *adcp) {
uint32_t mode;
const ADCConversionGroup *grpp = adcp->grpp;
/* DMA setup.*/
mode = adcp->dmamode;
if (grpp->circular) {
mode |= STM32_DMA_CR_CIRC;
}
if (adcp->depth > 1) {
/* If the buffer depth is greater than one then the half transfer interrupt
interrupt is enabled in order to allows streaming processing.*/
mode |= STM32_DMA_CR_HTIE;
}
dmaStreamSetMemory0(adcp->dmastp, adcp->samples);
dmaStreamSetTransactionSize(adcp->dmastp, (uint32_t)grpp->num_channels *
(uint32_t)adcp->depth);
dmaStreamSetMode(adcp->dmastp, mode);
dmaStreamEnable(adcp->dmastp);
/* ADC setup.*/
adcp->adc->SR = 0;
adcp->adc->SMPR1 = grpp->smpr1;
adcp->adc->SMPR2 = grpp->smpr2;
adcp->adc->SMPR3 = grpp->smpr3;
adcp->adc->SQR1 = grpp->sqr1;
adcp->adc->SQR2 = grpp->sqr2;
adcp->adc->SQR3 = grpp->sqr3;
adcp->adc->SQR4 = grpp->sqr4;
adcp->adc->SQR5 = grpp->sqr5;
/* ADC configuration and start, the start is performed using the method
specified in the CR2 configuration, usually ADC_CR2_SWSTART.*/
adcp->adc->CR1 = grpp->cr1 | ADC_CR1_OVRIE | ADC_CR1_SCAN;
if ((grpp->cr2 & ADC_CR2_SWSTART) != 0)
adcp->adc->CR2 = grpp->cr2 | ADC_CR2_CONT | ADC_CR2_DMA |
ADC_CR2_DDS | ADC_CR2_ADON;
else
adcp->adc->CR2 = grpp->cr2 | ADC_CR2_DMA |
ADC_CR2_DDS | ADC_CR2_ADON;
}
/**
* @brief Stops an ongoing conversion.
*
* @param[in] adcp pointer to the @p ADCDriver object
*
* @notapi
*/
void adc_lld_stop_conversion(ADCDriver *adcp) {
dmaStreamDisable(adcp->dmastp);
adcp->adc->CR1 = 0;
adcp->adc->CR2 = 0;
adcp->adc->CR2 = ADC_CR2_ADON;
}
/**
* @brief Enables the TSVREFE bit.
* @details The TSVREFE bit is required in order to sample the internal
* temperature sensor and internal reference voltage.
* @note This is an STM32-only functionality.
*/
void adcSTM32EnableTSVREFE(void) {
ADC->CCR |= ADC_CCR_TSVREFE;
}
/**
* @brief Disables the TSVREFE bit.
* @details The TSVREFE bit is required in order to sample the internal
* temperature sensor and internal reference voltage.
* @note This is an STM32-only functionality.
*/
void adcSTM32DisableTSVREFE(void) {
ADC->CCR &= ~ADC_CCR_TSVREFE;
}
#endif /* HAL_USE_ADC */
/** @} */
Reference in New Issue View Git Blame Copy Permalink