tinySA/demos/AVR-ATmega128-GCC/board.c

87 lines
2.2 KiB
C

/*
ChibiOS/RT - Copyright (C) 2006-2007 Giovanni Di Sirio.
This file is part of ChibiOS/RT.
ChibiOS/RT is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
ChibiOS/RT is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <ch.h>
#include "board.h"
#include "avr_serial.h"
CH_IRQ_HANDLER(TIMER0_COMP_vect) {
CH_IRQ_PROLOGUE();
chSysLockI();
chSysTimerHandlerI();
chSysUnlockI();
CH_IRQ_EPILOGUE();
}
/*
* Board initialization code.
*/
void hwinit(void) {
/*
* I/O ports setup.
*/
DDRA = VAL_DDRA;
PORTA = VAL_PORTA;
DDRB = VAL_DDRB;
PORTB = VAL_PORTB;
DDRC = VAL_DDRC;
PORTC = VAL_PORTC;
DDRD = VAL_DDRD;
PORTD = VAL_PORTD;
DDRE = VAL_DDRE;
PORTE = VAL_PORTE;
DDRF = VAL_DDRF;
PORTF = VAL_PORTF;
DDRG = VAL_DDRG;
PORTG = VAL_PORTG;
/*
* External interrupts setup, all disabled initially.
*/
EICRA = 0x00;
EICRB = 0x00;
EIMSK = 0x00;
/*
* Enables Idle mode for SLEEP instruction.
*/
MCUCR = (1 << SE);
/*
* Timer 0 setup.
*/
TCCR0 = (1 << WGM01) | (0 << WGM00) | // CTC mode.
(0 << COM01) | (0 << COM00) | // OC0A disabled (normal I/O).
(1 << CS02) | (0 << CS01) | (0 << CS00); // CLK/64 clock source.
OCR0 = F_CPU / 64 / CH_FREQUENCY - 1;
TCNT0 = 0; // Reset counter.
TIFR = (1 << OCF0); // Reset pending (if any).
TIMSK = (1 << OCIE0); // Interrupt on compare.
/*
* Other initializations.
*/
InitSerial();
}