485 lines
24 KiB
C
485 lines
24 KiB
C
/*
|
|
ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
|
|
2011,2012 Giovanni Di Sirio.
|
|
|
|
This file is part of ChibiOS/RT.
|
|
|
|
ChibiOS/RT is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
ChibiOS/RT is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#ifndef _BOARD_H_
|
|
#define _BOARD_H_
|
|
|
|
/*
|
|
* Setup for STMicroelectronics STM32F4-Discovery board.
|
|
*/
|
|
|
|
/*
|
|
* Board identifier.
|
|
*/
|
|
#define BOARD_OLIMEX_STM32_E407
|
|
#define BOARD_NAME "Olimex STM32-P407"
|
|
|
|
/*
|
|
* Ethernet PHY type.
|
|
*/
|
|
#define BOARD_PHY_ID MII_KS8721_ID
|
|
#define BOARD_PHY_RMII
|
|
|
|
/*
|
|
* Board frequencies.
|
|
* NOTE: The LSE crystal is not fitted by default on the board.
|
|
*/
|
|
#define STM32_LSECLK 32768
|
|
#define STM32_HSECLK 12000000
|
|
|
|
/*
|
|
* Board voltages.
|
|
* Required for performance limits calculation.
|
|
*/
|
|
#define STM32_VDD 330
|
|
|
|
/*
|
|
* MCU type as defined in the ST header file stm32f4xx.h.
|
|
*/
|
|
#define STM32F4XX
|
|
|
|
/*
|
|
* IO pins assignments.
|
|
*/
|
|
#define GPIOA_BUTTON_WKUP 0
|
|
#define GPIOA_ETH_RMII_REF_CLK 1
|
|
#define GPIOA_ETH_RMII_MDIO 2
|
|
#define GPIOA_ETH_RMII_MDINT 3
|
|
#define GPIOA_ETH_RMII_CRS_DV 7
|
|
#define GPIOA_USB_HS_BUSON 8
|
|
#define GPIOA_OTG_FS_VBUS 9
|
|
#define GPIOA_OTG_FS_ID 10
|
|
#define GPIOA_OTG_FS_DM 11
|
|
#define GPIOA_OTG_FS_DP 12
|
|
#define GPIOA_JTAG_TMS 13
|
|
#define GPIOA_JTAG_TCK 14
|
|
#define GPIOA_JTAG_TDI 15
|
|
|
|
#define GPIOB_USB_FS_BUSON 0
|
|
#define GPIOB_USB_HS_FAULT 1
|
|
#define GPIOB_BOOT1 2
|
|
#define GPIOB_JTAG_TDO 3
|
|
#define GPIOB_JTAG_TRST 4
|
|
#define GPIOB_I2C1_SCL 8
|
|
#define GPIOB_I2C1_SDA 9
|
|
#define GPIOB_SPI2_SCK 10
|
|
#define GPIOB_USART3_TX 10 /* Same as GPIOB_SPI2_SCK. */
|
|
#define GPIOB_USART3_RX 11
|
|
#define GPIOB_OTG_HS_ID 12
|
|
#define GPIOB_OTG_FS_VBUS 13
|
|
#define GPIOB_OTG_HS_DM 14
|
|
#define GPIOB_OTG_HS_DP 15
|
|
|
|
#define GPIOC_ETH_RMII_MDC 1
|
|
#define GPIOC_SPI2_MISO 2
|
|
#define GPIOC_SPI2_MOSI 3
|
|
#define GPIOC_ETH_RMII_RXD0 4
|
|
#define GPIOC_ETH_RMII_RXD1 5
|
|
#define GPIOC_USART6_TX 6
|
|
#define GPIOC_USART6_RX 7
|
|
#define GPIOC_SD_D0 8
|
|
#define GPIOC_SD_D1 9
|
|
#define GPIOC_SD_D2 10
|
|
#define GPIOC_SD_D3 11
|
|
#define GPIOC_SD_CLK 12
|
|
#define GPIOC_LED 13
|
|
#define GPIOC_OSC32_IN 14
|
|
#define GPIOC_OSC32_OUT 15
|
|
|
|
#define GPIOD_SD_CMD 2
|
|
|
|
#define GPIOF_USB_FS_FAULT 11
|
|
|
|
#define GPIOG_SPI2_CS 10
|
|
#define GPIOG_ETH_RMII_TXEN 11
|
|
#define GPIOG_ETH_RMII_TXD0 13
|
|
#define GPIOG_ETH_RMII_TXD1 14
|
|
|
|
#define GPIOH_OSC_IN 0
|
|
#define GPIOH_OSC_OUT 1
|
|
|
|
/*
|
|
* I/O ports initial setup, this configuration is established soon after reset
|
|
* in the initialization code.
|
|
* Please refer to the STM32 Reference Manual for details.
|
|
*/
|
|
#define PIN_MODE_INPUT(n) (0U << ((n) * 2))
|
|
#define PIN_MODE_OUTPUT(n) (1U << ((n) * 2))
|
|
#define PIN_MODE_ALTERNATE(n) (2U << ((n) * 2))
|
|
#define PIN_MODE_ANALOG(n) (3U << ((n) * 2))
|
|
#define PIN_OTYPE_PUSHPULL(n) (0U << (n))
|
|
#define PIN_OTYPE_OPENDRAIN(n) (1U << (n))
|
|
#define PIN_OSPEED_2M(n) (0U << ((n) * 2))
|
|
#define PIN_OSPEED_25M(n) (1U << ((n) * 2))
|
|
#define PIN_OSPEED_50M(n) (2U << ((n) * 2))
|
|
#define PIN_OSPEED_100M(n) (3U << ((n) * 2))
|
|
#define PIN_PUDR_FLOATING(n) (0U << ((n) * 2))
|
|
#define PIN_PUDR_PULLUP(n) (1U << ((n) * 2))
|
|
#define PIN_PUDR_PULLDOWN(n) (2U << ((n) * 2))
|
|
#define PIN_AFIO_AF(n, v) ((v##U) << ((n % 8) * 4))
|
|
|
|
/*
|
|
* Port A setup.
|
|
* All input with pull-up except:
|
|
* PA0 - GPIOA_BUTTON_WKUP (input floating).
|
|
* PA1 - GPIOA_ETH_RMII_REF_CLK(alternate 11).
|
|
* PA2 - GPIOA_ETH_RMII_MDIO (alternate 11).
|
|
* PA3 - GPIOA_ETH_RMII_MDINT (input floating).
|
|
* PA7 - GPIOA_ETH_RMII_CRS_DV (alternate 11).
|
|
* PA8 - GPIOA_USB_HS_BUSON (output push-pull).
|
|
* PA9 - GPIOA_OTG_FS_VBUS (input pull-down).
|
|
* PA10 - GPIOA_OTG_FS_ID (alternate 10).
|
|
* PA11 - GPIOA_OTG_FS_DM (alternate 10).
|
|
* PA12 - GPIOA_OTG_FS_DP (alternate 10).
|
|
* PA13 - GPIOA_JTAG_TMS (alternate 0).
|
|
* PA14 - GPIOA_JTAG_TCK (alternate 0, pull-down).
|
|
* PA15 - GPIOA_JTAG_TDI (alternate 0).
|
|
*/
|
|
#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_BUTTON_WKUP) | \
|
|
PIN_MODE_ALTERNATE(GPIOA_ETH_RMII_REF_CLK) | \
|
|
PIN_MODE_ALTERNATE(GPIOA_ETH_RMII_MDIO) | \
|
|
PIN_MODE_INPUT(GPIOA_ETH_RMII_MDINT) | \
|
|
PIN_MODE_INPUT(4) | \
|
|
PIN_MODE_INPUT(5) | \
|
|
PIN_MODE_INPUT(6) | \
|
|
PIN_MODE_ALTERNATE(GPIOA_ETH_RMII_CRS_DV) | \
|
|
PIN_MODE_OUTPUT(GPIOA_USB_HS_BUSON) | \
|
|
PIN_MODE_INPUT(GPIOA_OTG_FS_VBUS) | \
|
|
PIN_MODE_ALTERNATE(GPIOA_OTG_FS_ID) | \
|
|
PIN_MODE_ALTERNATE(GPIOA_OTG_FS_DM) | \
|
|
PIN_MODE_ALTERNATE(GPIOA_OTG_FS_DP) | \
|
|
PIN_MODE_ALTERNATE(GPIOA_JTAG_TMS) | \
|
|
PIN_MODE_ALTERNATE(GPIOA_JTAG_TCK) | \
|
|
PIN_MODE_ALTERNATE(GPIOA_JTAG_TDI))
|
|
#define VAL_GPIOA_OTYPER 0x00000000
|
|
#define VAL_GPIOA_OSPEEDR 0xFFFFFFFF
|
|
#define VAL_GPIOA_PUPDR (PIN_PUDR_PULLUP(4) | \
|
|
PIN_PUDR_PULLUP(5) | \
|
|
PIN_PUDR_PULLUP(6) | \
|
|
PIN_PUDR_PULLDOWN(GPIOA_OTG_FS_VBUS) | \
|
|
PIN_PUDR_PULLDOWN(GPIOA_SWCLK))
|
|
#define VAL_GPIOA_ODR 0xFFFFFFFF
|
|
#define VAL_GPIOA_AFRL (PIN_AFIO_AF(GPIOA_ETH_RMII_REF_CLK, 11) | \
|
|
PIN_AFIO_AF(GPIOA_ETH_RMII_MDIO, 11) | \
|
|
PIN_AFIO_AF(GPIOA_ETH_RMII_CRS_DV, 11))
|
|
#define VAL_GPIOA_AFRH (PIN_AFIO_AF(GPIOA_MCO1, 0) | \
|
|
PIN_AFIO_AF(GPIOA_OTG_FS_ID, 10) | \
|
|
PIN_AFIO_AF(GPIOA_OTG_FS_DM, 10) | \
|
|
PIN_AFIO_AF(GPIOA_OTG_FS_DP, 10) | \
|
|
PIN_AFIO_AF(GPIOA_JTAG_TMS, 0) | \
|
|
PIN_AFIO_AF(GPIOA_JTAG_TCK, 0) | \
|
|
PIN_AFIO_AF(GPIOA_JTAG_TDI, 0))
|
|
|
|
/*
|
|
* Port B setup.
|
|
* All input with pull-up except:
|
|
* PB0 - GPIOB_USB_FS_BUSON (output push-pull).
|
|
* PB1 - GPIOB_USB_HS_FAULT (input floating).
|
|
* PB2 - GPIOB_BOOT1 (input floating).
|
|
* PB3 - GPIOB_JTAG_TDO (alternate 0).
|
|
* PB4 - GPIOB_JTAG_TRST (alternate 0).
|
|
* PB8 - GPIOB_I2C1_SCL (alternate 4).
|
|
* PB9 - GPIOB_I2C1_SDA (alternate 4).
|
|
* PB10 - GPIOB_SPI2_SCK (alternate 5).
|
|
* PB12 - GPIOB_OTG_HS_ID (alternate 10).
|
|
* PB13 - GPIOB_OTG_FS_VBUS (input pull-down).
|
|
* PB14 - GPIOB_OTG_HS_DM (alternate 10).
|
|
* PB15 - GPIOB_OTG_HS_DP (alternate 10).
|
|
*/
|
|
#define VAL_GPIOB_MODER (PIN_MODE_OUTPUT(GPIOB_USB_FS_BUSON) | \
|
|
PIN_MODE_INPUT(GPIOB_USB_HS_FAULT) | \
|
|
PIN_MODE_INPUT(GPIOB_BOOT1) | \
|
|
PIN_MODE_ALTERNATE(GPIOB_JTAG_TDO) | \
|
|
PIN_MODE_INPUT(GPIOB_JTAG_TRST) | \
|
|
PIN_MODE_INPUT(5) | \
|
|
PIN_MODE_INPUT(6) | \
|
|
PIN_MODE_INPUT(7) | \
|
|
PIN_MODE_ALTERNATE(GPIOB_I2C1_SCL) | \
|
|
PIN_MODE_ALTERNATE(GPIOB_I2C1_SDA) | \
|
|
PIN_MODE_ALTERNATE(GPIOB_SPI2_SCK) | \
|
|
PIN_MODE_INPUT(11) | \
|
|
PIN_MODE_ALTERNATE(GPIOB_OTG_HS_ID) | \
|
|
PIN_MODE_INPUT(GPIOB_OTG_FS_VBUS) | \
|
|
PIN_MODE_ALTERNATE(GPIOB_OTG_HS_DM) | \
|
|
PIN_MODE_ALTERNATE(GPIOB_OTG_HS_DP))
|
|
#define VAL_GPIOB_OTYPER (PIN_OTYPE_OPENDRAIN(GPIOB_I2C1_SCL) | \
|
|
PIN_OTYPE_OPENDRAIN(GPIOB_I2C1_SDA))
|
|
#define VAL_GPIOB_OSPEEDR 0xFFFFFFFF
|
|
#define VAL_GPIOB_PUPDR (PIN_PUDR_PULLUP(5) | \
|
|
PIN_PUDR_PULLUP(6) | \
|
|
PIN_PUDR_PULLUP(7) | \
|
|
PIN_PUDR_PULLUP(11) | \
|
|
PIN_PUDR_PULLDOWN(GPIOB_OTG_FS_VBUS))
|
|
#define VAL_GPIOB_ODR 0xFFFFFFFD
|
|
#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_JTAG_TDO, 0) | \
|
|
PIN_AFIO_AF(GPIOB_JTAG_TRST, 0))
|
|
#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_I2C1_SDA, 4) | \
|
|
PIN_AFIO_AF(GPIOB_I2C1_SCL, 4) | \
|
|
PIN_AFIO_AF(GPIOB_SPI2_SCK, 5) | \
|
|
PIN_AFIO_AF(GPIOB_OTG_HS_ID, 10) | \
|
|
PIN_AFIO_AF(GPIOB_OTG_HS_DM, 10) | \
|
|
PIN_AFIO_AF(GPIOB_OTG_HS_DP, 10))
|
|
|
|
/*
|
|
* Port C setup.
|
|
* All input with pull-up except:
|
|
* PC0 - GPIOC_P0 (input pull-up).
|
|
* PC1 - GPIOC_ETH_RMII_MDC (alternate 11).
|
|
* PC2 - GPIOC_SPI2_MISO (alternate 5).
|
|
* PC3 - GPIOC_SPI2_MOSI (alternate 5).
|
|
* PC4 - GPIOC_ETH_RMII_RXD0 (alternate 11).
|
|
* PC5 - GPIOC_ETH_RMII_RXD1 (alternate 11).
|
|
* PC6 - GPIOC_USART6_TX (alternate 8).
|
|
* PC7 - GPIOC_USART6_RX (alternate 8).
|
|
* PC8 - GPIOC_SD_D0 (alternate 12).
|
|
* PC9 - GPIOC_SD_D1 (alternate 12).
|
|
* PC10 - GPIOC_SD_D2 (alternate 12).
|
|
* PC11 - GPIOC_SD_D3 (alternate 12).
|
|
* PC12 - GPIOC_SD_CLK (alternate 12).
|
|
* PC13 - GPIOC_LED (output push-pull).
|
|
* PC14 - GPIOC_OSC32_IN (input floating).
|
|
* PC15 - GPIOC_OSC32_OUT (input floating).
|
|
*/
|
|
#define VAL_GPIOC_MODER (PIN_MODE_INPUT(GPIOC_P0) | \
|
|
PIN_MODE_ALTERNATE(GPIOC_ETH_RMII_MDC) | \
|
|
PIN_MODE_ALTERNATE(GPIOC_SPI2_MISO) | \
|
|
PIN_MODE_ALTERNATE(GPIOC_SPI2_MOSI) | \
|
|
PIN_MODE_ALTERNATE(GPIOC_ETH_RMII_RXD0) | \
|
|
PIN_MODE_ALTERNATE(GPIOC_ETH_RMII_RXD1) | \
|
|
PIN_MODE_ALTERNATE(GPIOC_USART6_TX) | \
|
|
PIN_MODE_ALTERNATE(GPIOC_USART6_RX) | \
|
|
PIN_MODE_ALTERNATE(GPIOC_SD_D0) | \
|
|
PIN_MODE_ALTERNATE(GPIOC_SD_D1) | \
|
|
PIN_MODE_ALTERNATE(GPIOC_SD_D2) | \
|
|
PIN_MODE_ALTERNATE(GPIOC_SD_D3) | \
|
|
PIN_MODE_ALTERNATE(GPIOC_SD_CLK) | \
|
|
PIN_MODE_OUTPUT(GPIOC_LED) | \
|
|
PIN_MODE_INPUT(GPIOC_OSC32_IN) | \
|
|
PIN_MODE_INPUT(GPIOC_OSC32_OUT))
|
|
#define VAL_GPIOC_OTYPER 0x00000000
|
|
#define VAL_GPIOC_OSPEEDR 0xFFFFFFFF
|
|
#define VAL_GPIOC_PUPDR (PIN_PUDR_PULLUP(GPIOC_P0))
|
|
#define VAL_GPIOC_ODR 0xFFFFFFFF
|
|
#define VAL_GPIOC_AFRL (PIN_AFIO_AF(GPIOC_ETH_RMII_MDC, 11) | \
|
|
PIN_AFIO_AF(GPIOC_SPI2_MISO, 5) | \
|
|
PIN_AFIO_AF(GPIOC_SPI2_MOSI, 5) | \
|
|
PIN_AFIO_AF(GPIOC_ETH_RMII_RXD0, 11) | \
|
|
PIN_AFIO_AF(GPIOC_ETH_RMII_RXD1, 11) | \
|
|
PIN_AFIO_AF(GPIOC_USART6_TX, 8) | \
|
|
PIN_AFIO_AF(GPIOC_USART6_RX, 8))
|
|
#define VAL_GPIOC_AFRH (PIN_AFIO_AF(GPIOC_SD_D0, 12) | \
|
|
PIN_AFIO_AF(GPIOC_SD_D1, 12) | \
|
|
PIN_AFIO_AF(GPIOC_SD_D2, 12) | \
|
|
PIN_AFIO_AF(GPIOC_SD_D3, 12) | \
|
|
PIN_AFIO_AF(GPIOC_SD_CLK, 12))
|
|
|
|
/*
|
|
* Port D setup.
|
|
* All input with pull-up except:
|
|
* PD2 - GPIOD_SD_CMD (alternate 12).
|
|
*/
|
|
#define VAL_GPIOD_MODER (PIN_MODE_ALTERNATE(GPIOD_SD_CMD))
|
|
#define VAL_GPIOD_OTYPER 0x00000000
|
|
#define VAL_GPIOD_OSPEEDR 0xFFFFFFFF
|
|
#define VAL_GPIOD_PUPDR (PIN_PUDR_PULLUP(0) | \
|
|
PIN_PUDR_PULLUP(1) | \
|
|
PIN_PUDR_FLOATING(GPIOD_SD_CMD) | \
|
|
PIN_PUDR_PULLUP(3) | \
|
|
PIN_PUDR_PULLUP(4) | \
|
|
PIN_PUDR_PULLUP(5) | \
|
|
PIN_PUDR_PULLUP(6) | \
|
|
PIN_PUDR_PULLUP(7) | \
|
|
PIN_PUDR_PULLUP(8) | \
|
|
PIN_PUDR_PULLUP(9) | \
|
|
PIN_PUDR_PULLUP(10) | \
|
|
PIN_PUDR_PULLUP(11) | \
|
|
PIN_PUDR_PULLUP(12) | \
|
|
PIN_PUDR_PULLUP(13) | \
|
|
PIN_PUDR_PULLUP(14) | \
|
|
PIN_PUDR_PULLUP(15))
|
|
#define VAL_GPIOD_ODR 0xFFFFFFFF
|
|
#define VAL_GPIOD_AFRL (PIN_AFIO_AF(GPIOD_SD_CMD, 12))
|
|
#define VAL_GPIOD_AFRH 0x00000000
|
|
|
|
/*
|
|
* Port E setup.
|
|
* All input with pull-up.
|
|
*/
|
|
#define VAL_GPIOE_MODER 0x00000000
|
|
#define VAL_GPIOE_OTYPER 0x00000000
|
|
#define VAL_GPIOE_OSPEEDR 0xFFFFFFFF
|
|
#define VAL_GPIOE_PUPDR (PIN_PUDR_PULLUP(0) | \
|
|
PIN_PUDR_PULLUP(1) | \
|
|
PIN_PUDR_PULLUP(2) | \
|
|
PIN_PUDR_PULLUP(3) | \
|
|
PIN_PUDR_PULLUP(4) | \
|
|
PIN_PUDR_PULLUP(5) | \
|
|
PIN_PUDR_PULLUP(6) | \
|
|
PIN_PUDR_PULLUP(7) | \
|
|
PIN_PUDR_PULLUP(8) | \
|
|
PIN_PUDR_PULLUP(9) | \
|
|
PIN_PUDR_PULLUP(10) | \
|
|
PIN_PUDR_PULLUP(11) | \
|
|
PIN_PUDR_PULLUP(12) | \
|
|
PIN_PUDR_PULLUP(13) | \
|
|
PIN_PUDR_PULLUP(14) | \
|
|
PIN_PUDR_PULLUP(15))
|
|
#define VAL_GPIOE_ODR 0xFFFFFFFF
|
|
#define VAL_GPIOE_AFRL 0x00000000
|
|
#define VAL_GPIOE_AFRH 0x00000000
|
|
|
|
/*
|
|
* Port F setup.
|
|
* All input with pull-up except:
|
|
* PF11 - GPIOF_USB_FS_FAULT (input floating).
|
|
*/
|
|
#define VAL_GPIOF_MODER 0x00000000
|
|
#define VAL_GPIOF_OTYPER 0x00000000
|
|
#define VAL_GPIOF_OSPEEDR 0xFFFFFFFF
|
|
#define VAL_GPIOF_PUPDR (PIN_PUDR_PULLUP(0) | \
|
|
PIN_PUDR_PULLUP(1) | \
|
|
PIN_PUDR_PULLUP(2) | \
|
|
PIN_PUDR_PULLUP(3) | \
|
|
PIN_PUDR_PULLUP(4) | \
|
|
PIN_PUDR_PULLUP(5) | \
|
|
PIN_PUDR_PULLUP(6) | \
|
|
PIN_PUDR_PULLUP(7) | \
|
|
PIN_PUDR_PULLUP(8) | \
|
|
PIN_PUDR_PULLUP(9) | \
|
|
PIN_PUDR_PULLUP(10) | \
|
|
PIN_PUDR_FLOATING(GPIOF_USB_FS_FAULT) | \
|
|
PIN_PUDR_PULLUP(12) | \
|
|
PIN_PUDR_PULLUP(13) | \
|
|
PIN_PUDR_PULLUP(14) | \
|
|
PIN_PUDR_PULLUP(15))
|
|
#define VAL_GPIOF_ODR 0xFFFFFFFF
|
|
#define VAL_GPIOF_AFRL 0x00000000
|
|
#define VAL_GPIOF_AFRH 0x00000000
|
|
|
|
/*
|
|
* Port G setup.
|
|
* All input with pull-up.
|
|
*/
|
|
#define VAL_GPIOG_MODER 0x00000000
|
|
#define VAL_GPIOG_OTYPER 0x00000000
|
|
#define VAL_GPIOG_OSPEEDR 0xFFFFFFFF
|
|
#define VAL_GPIOG_PUPDR (PIN_PUDR_PULLUP(0) | \
|
|
PIN_PUDR_PULLUP(1) | \
|
|
PIN_PUDR_PULLUP(2) | \
|
|
PIN_PUDR_PULLUP(3) | \
|
|
PIN_PUDR_PULLUP(4) | \
|
|
PIN_PUDR_PULLUP(5) | \
|
|
PIN_PUDR_PULLUP(6) | \
|
|
PIN_PUDR_PULLUP(7) | \
|
|
PIN_PUDR_PULLUP(8) | \
|
|
PIN_PUDR_PULLUP(9) | \
|
|
PIN_PUDR_PULLUP(10) | \
|
|
PIN_PUDR_PULLUP(11) | \
|
|
PIN_PUDR_PULLUP(12) | \
|
|
PIN_PUDR_PULLUP(13) | \
|
|
PIN_PUDR_PULLUP(14) | \
|
|
PIN_PUDR_PULLUP(15))
|
|
#define VAL_GPIOG_ODR 0xFFFFFFFF
|
|
#define VAL_GPIOG_AFRL 0x00000000
|
|
#define VAL_GPIOG_AFRH 0x00000000
|
|
|
|
/*
|
|
* Port H setup.
|
|
* All input with pull-up except:
|
|
* PH0 - GPIOH_OSC_IN (input floating).
|
|
* PH1 - GPIOH_OSC_OUT (input floating).
|
|
*/
|
|
#define VAL_GPIOH_MODER (PIN_MODE_INPUT(GPIOH_OSC_IN) | \
|
|
PIN_MODE_INPUT(GPIOH_OSC_OUT) | \
|
|
PIN_MODE_INPUT(2) | \
|
|
PIN_MODE_INPUT(3) | \
|
|
PIN_MODE_INPUT(4) | \
|
|
PIN_MODE_INPUT(5) | \
|
|
PIN_MODE_INPUT(6) | \
|
|
PIN_MODE_INPUT(7) | \
|
|
PIN_MODE_INPUT(8) | \
|
|
PIN_MODE_INPUT(9) | \
|
|
PIN_MODE_INPUT(10) | \
|
|
PIN_MODE_INPUT(11) | \
|
|
PIN_MODE_INPUT(12) | \
|
|
PIN_MODE_INPUT(13) | \
|
|
PIN_MODE_INPUT(14) | \
|
|
PIN_MODE_INPUT(15))
|
|
#define VAL_GPIOH_OTYPER 0x00000000
|
|
#define VAL_GPIOH_OSPEEDR 0xFFFFFFFF
|
|
#define VAL_GPIOH_PUPDR (PIN_PUDR_FLOATING(GPIOH_OSC_IN) | \
|
|
PIN_PUDR_FLOATING(GPIOH_OSC_OUT) | \
|
|
PIN_PUDR_PULLUP(2) | \
|
|
PIN_PUDR_PULLUP(3) | \
|
|
PIN_PUDR_PULLUP(4) | \
|
|
PIN_PUDR_PULLUP(5) | \
|
|
PIN_PUDR_PULLUP(6) | \
|
|
PIN_PUDR_PULLUP(7) | \
|
|
PIN_PUDR_PULLUP(8) | \
|
|
PIN_PUDR_PULLUP(9) | \
|
|
PIN_PUDR_PULLUP(10) | \
|
|
PIN_PUDR_PULLUP(11) | \
|
|
PIN_PUDR_PULLUP(12) | \
|
|
PIN_PUDR_PULLUP(13) | \
|
|
PIN_PUDR_PULLUP(14) | \
|
|
PIN_PUDR_PULLUP(15))
|
|
#define VAL_GPIOH_ODR 0xFFFFFFFF
|
|
#define VAL_GPIOH_AFRL 0x00000000
|
|
#define VAL_GPIOH_AFRH 0x00000000
|
|
|
|
/*
|
|
* Port I setup.
|
|
* All input with pull-up.
|
|
*/
|
|
#define VAL_GPIOI_MODER 0x00000000
|
|
#define VAL_GPIOI_OTYPER 0x00000000
|
|
#define VAL_GPIOI_OSPEEDR 0xFFFFFFFF
|
|
#define VAL_GPIOI_PUPDR (PIN_PUDR_PULLUP(0) | \
|
|
PIN_PUDR_PULLUP(1) | \
|
|
PIN_PUDR_PULLUP(2) | \
|
|
PIN_PUDR_PULLUP(3) | \
|
|
PIN_PUDR_PULLUP(4) | \
|
|
PIN_PUDR_PULLUP(5) | \
|
|
PIN_PUDR_PULLUP(6) | \
|
|
PIN_PUDR_PULLUP(7) | \
|
|
PIN_PUDR_PULLUP(8) | \
|
|
PIN_PUDR_PULLUP(9) | \
|
|
PIN_PUDR_PULLUP(10) | \
|
|
PIN_PUDR_PULLUP(11) | \
|
|
PIN_PUDR_PULLUP(12) | \
|
|
PIN_PUDR_PULLUP(13) | \
|
|
PIN_PUDR_PULLUP(14) | \
|
|
PIN_PUDR_PULLUP(15))
|
|
#define VAL_GPIOI_ODR 0xFFFFFFFF
|
|
#define VAL_GPIOI_AFRL 0x00000000
|
|
#define VAL_GPIOI_AFRH 0x00000000
|
|
|
|
#if !defined(_FROM_ASM_)
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
void boardInit(void);
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
#endif /* _FROM_ASM_ */
|
|
|
|
#endif /* _BOARD_H_ */
|