240 lines
7.2 KiB
C
240 lines
7.2 KiB
C
/*
|
|
ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
|
|
2011,2012 Giovanni Di Sirio.
|
|
|
|
This file is part of ChibiOS/RT.
|
|
|
|
ChibiOS/RT is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
ChibiOS/RT is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
/**
|
|
* @file STM32F1xx/adc_lld.c
|
|
* @brief STM32F1xx ADC subsystem low level driver source.
|
|
*
|
|
* @addtogroup ADC
|
|
* @{
|
|
*/
|
|
|
|
#include "ch.h"
|
|
#include "hal.h"
|
|
|
|
#if HAL_USE_ADC || defined(__DOXYGEN__)
|
|
|
|
/*===========================================================================*/
|
|
/* Driver local definitions. */
|
|
/*===========================================================================*/
|
|
|
|
/*===========================================================================*/
|
|
/* Driver exported variables. */
|
|
/*===========================================================================*/
|
|
|
|
/** @brief ADC1 driver identifier.*/
|
|
#if STM32_ADC_USE_ADC1 || defined(__DOXYGEN__)
|
|
ADCDriver ADCD1;
|
|
#endif
|
|
|
|
/*===========================================================================*/
|
|
/* Driver local variables. */
|
|
/*===========================================================================*/
|
|
|
|
/*===========================================================================*/
|
|
/* Driver local functions. */
|
|
/*===========================================================================*/
|
|
|
|
/**
|
|
* @brief Shared ADC DMA ISR service routine.
|
|
*
|
|
* @param[in] adcp pointer to the @p ADCDriver object
|
|
* @param[in] flags pre-shifted content of the ISR register
|
|
*/
|
|
static void adc_lld_serve_rx_interrupt(ADCDriver *adcp, uint32_t flags) {
|
|
|
|
/* DMA errors handling.*/
|
|
if ((flags & STM32_DMA_ISR_TEIF) != 0) {
|
|
/* DMA, this could help only if the DMA tries to access an unmapped
|
|
address space or violates alignment rules.*/
|
|
_adc_isr_error_code(adcp, ADC_ERR_DMAFAILURE);
|
|
}
|
|
else {
|
|
if ((flags & STM32_DMA_ISR_HTIF) != 0) {
|
|
/* Half transfer processing.*/
|
|
_adc_isr_half_code(adcp);
|
|
}
|
|
if ((flags & STM32_DMA_ISR_TCIF) != 0) {
|
|
/* Transfer complete processing.*/
|
|
_adc_isr_full_code(adcp);
|
|
}
|
|
}
|
|
}
|
|
|
|
/*===========================================================================*/
|
|
/* Driver interrupt handlers. */
|
|
/*===========================================================================*/
|
|
|
|
/*===========================================================================*/
|
|
/* Driver exported functions. */
|
|
/*===========================================================================*/
|
|
|
|
/**
|
|
* @brief Low level ADC driver initialization.
|
|
*
|
|
* @notapi
|
|
*/
|
|
void adc_lld_init(void) {
|
|
|
|
#if STM32_ADC_USE_ADC1
|
|
/* Driver initialization.*/
|
|
adcObjectInit(&ADCD1);
|
|
ADCD1.adc = ADC1;
|
|
ADCD1.dmastp = STM32_DMA1_STREAM1;
|
|
ADCD1.dmamode = STM32_DMA_CR_PL(STM32_ADC_ADC1_DMA_PRIORITY) |
|
|
STM32_DMA_CR_MSIZE_HWORD | STM32_DMA_CR_PSIZE_HWORD |
|
|
STM32_DMA_CR_MINC | STM32_DMA_CR_TCIE |
|
|
STM32_DMA_CR_TEIE;
|
|
|
|
/* Temporary activation.*/
|
|
rccEnableADC1(FALSE);
|
|
ADC1->CR1 = 0;
|
|
ADC1->CR2 = ADC_CR2_ADON;
|
|
|
|
/* Reset calibration just to be safe.*/
|
|
ADC1->CR2 = ADC_CR2_ADON | ADC_CR2_RSTCAL;
|
|
while ((ADC1->CR2 & ADC_CR2_RSTCAL) != 0)
|
|
;
|
|
|
|
/* Calibration.*/
|
|
ADC1->CR2 = ADC_CR2_ADON | ADC_CR2_CAL;
|
|
while ((ADC1->CR2 & ADC_CR2_CAL) != 0)
|
|
;
|
|
|
|
/* Return the ADC in low power mode.*/
|
|
ADC1->CR2 = 0;
|
|
rccDisableADC1(FALSE);
|
|
#endif
|
|
}
|
|
|
|
/**
|
|
* @brief Configures and activates the ADC peripheral.
|
|
*
|
|
* @param[in] adcp pointer to the @p ADCDriver object
|
|
*
|
|
* @notapi
|
|
*/
|
|
void adc_lld_start(ADCDriver *adcp) {
|
|
|
|
/* If in stopped state then enables the ADC and DMA clocks.*/
|
|
if (adcp->state == ADC_STOP) {
|
|
#if STM32_ADC_USE_ADC1
|
|
if (&ADCD1 == adcp) {
|
|
bool_t b;
|
|
b = dmaStreamAllocate(adcp->dmastp,
|
|
STM32_ADC_ADC1_IRQ_PRIORITY,
|
|
(stm32_dmaisr_t)adc_lld_serve_rx_interrupt,
|
|
(void *)adcp);
|
|
chDbgAssert(!b, "adc_lld_start(), #1", "stream already allocated");
|
|
dmaStreamSetPeripheral(adcp->dmastp, &ADC1->DR);
|
|
rccEnableADC1(FALSE);
|
|
}
|
|
#endif
|
|
|
|
/* ADC setup, the calibration procedure has already been performed
|
|
during initialization.*/
|
|
adcp->adc->CR1 = 0;
|
|
adcp->adc->CR2 = 0;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Deactivates the ADC peripheral.
|
|
*
|
|
* @param[in] adcp pointer to the @p ADCDriver object
|
|
*
|
|
* @notapi
|
|
*/
|
|
void adc_lld_stop(ADCDriver *adcp) {
|
|
|
|
/* If in ready state then disables the ADC clock.*/
|
|
if (adcp->state == ADC_READY) {
|
|
#if STM32_ADC_USE_ADC1
|
|
if (&ADCD1 == adcp) {
|
|
ADC1->CR1 = 0;
|
|
ADC1->CR2 = 0;
|
|
dmaStreamRelease(adcp->dmastp);
|
|
rccDisableADC1(FALSE);
|
|
}
|
|
#endif
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Starts an ADC conversion.
|
|
*
|
|
* @param[in] adcp pointer to the @p ADCDriver object
|
|
*
|
|
* @notapi
|
|
*/
|
|
void adc_lld_start_conversion(ADCDriver *adcp) {
|
|
uint32_t mode, n, cr2;
|
|
const ADCConversionGroup *grpp = adcp->grpp;
|
|
|
|
/* DMA setup.*/
|
|
mode = adcp->dmamode;
|
|
if (grpp->circular)
|
|
mode |= STM32_DMA_CR_CIRC;
|
|
if (adcp->depth > 1) {
|
|
/* If the buffer depth is greater than one then the half transfer interrupt
|
|
interrupt is enabled in order to allows streaming processing.*/
|
|
mode |= STM32_DMA_CR_HTIE;
|
|
n = (uint32_t)grpp->num_channels * (uint32_t)adcp->depth;
|
|
}
|
|
else
|
|
n = (uint32_t)grpp->num_channels;
|
|
dmaStreamSetMemory0(adcp->dmastp, adcp->samples);
|
|
dmaStreamSetTransactionSize(adcp->dmastp, n);
|
|
dmaStreamSetMode(adcp->dmastp, mode);
|
|
dmaStreamEnable(adcp->dmastp);
|
|
|
|
/* ADC setup.*/
|
|
adcp->adc->CR1 = grpp->cr1 | ADC_CR1_SCAN;
|
|
cr2 = grpp->cr2 | ADC_CR2_DMA | ADC_CR2_ADON;
|
|
if ((cr2 & (ADC_CR2_EXTTRIG | ADC_CR2_JEXTTRIG)) == 0)
|
|
cr2 |= ADC_CR2_CONT;
|
|
adcp->adc->CR2 = grpp->cr2 | cr2;
|
|
adcp->adc->SMPR1 = grpp->smpr1;
|
|
adcp->adc->SMPR2 = grpp->smpr2;
|
|
adcp->adc->SQR1 = grpp->sqr1;
|
|
adcp->adc->SQR2 = grpp->sqr2;
|
|
adcp->adc->SQR3 = grpp->sqr3;
|
|
|
|
/* ADC start by writing ADC_CR2_ADON a second time.*/
|
|
adcp->adc->CR2 = cr2;
|
|
}
|
|
|
|
/**
|
|
* @brief Stops an ongoing conversion.
|
|
*
|
|
* @param[in] adcp pointer to the @p ADCDriver object
|
|
*
|
|
* @notapi
|
|
*/
|
|
void adc_lld_stop_conversion(ADCDriver *adcp) {
|
|
|
|
dmaStreamDisable(adcp->dmastp);
|
|
adcp->adc->CR2 = 0;
|
|
}
|
|
|
|
#endif /* HAL_USE_ADC */
|
|
|
|
/** @} */
|