This file contains invisible Unicode characters that may be processed differently from what appears below. If your use case is intentional and legitimate, you can safely ignore this warning. Use the Escape button to reveal hidden characters.
*****************************************************************************
** ChibiOS/RT port for ARM-Cortex-M3 STM32F103. **
*****************************************************************************
** TARGET **
The demo will on an Olimex STM32-P103 board.
** The Demo **
This demo shows how to integrate the FatFs file system and use the SPI and MMC
drivers.
The demo flashes the board LED using a thread and monitors the MMC slot for
a card insertion. By pressing the button located on the board while a card is
inserted a directory dump on the serial port is performed, if a card is not
inserted then the test procedure is activated.
** Build Procedure **
The demo has been tested by using the free Codesourcery GCC-based toolchain,
YAGARTO and an experimental WinARM build including GCC 4.3.0.
Just modify the TRGT line in the makefile in order to use different GCC ports.
** Notes **
Some files used by the demo are not part of ChibiOS/RT but are copyright of
ST Microelectronics and are licensed under a different license.
Also note that not all the files present in the ST library are distributed
with ChibiOS/RT, you can find the whole library on the ST web site:
http://www.st.com
876463f721