zcy
/
tinySA
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
tinySA/os/hal/platforms/AT91SAM7/serial_lld.c

380 lines
11 KiB
C
Raw Blame History

/*
ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
2011,2012 Giovanni Di Sirio.
This file is part of ChibiOS/RT.
ChibiOS/RT is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
ChibiOS/RT is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/**
* @file AT91SAM7/serial_lld.c
* @brief AT91SAM7 low level serial driver code.
*
* @addtogroup SERIAL
* @{
*/
#include "ch.h"
#include "hal.h"
#if HAL_USE_SERIAL || defined(__DOXYGEN__)
#if SAM7_PLATFORM == SAM7S256
#define SAM7_USART0_RX AT91C_PA5_RXD0
#define SAM7_USART0_TX AT91C_PA6_TXD0
#define SAM7_USART1_RX AT91C_PA21_RXD1
#define SAM7_USART1_TX AT91C_PA22_TXD1
#define SAM7_DBGU_RX AT91C_PA9_DRXD
#define SAM7_DBGU_TX AT91C_PA10_DTXD
#elif SAM7_PLATFORM == SAM7X256
#define SAM7_USART0_RX AT91C_PA0_RXD0
#define SAM7_USART0_TX AT91C_PA1_TXD0
#define SAM7_USART1_RX AT91C_PA5_RXD1
#define SAM7_USART1_TX AT91C_PA6_TXD1
#define SAM7_DBGU_RX AT91C_PA27_DRXD
#define SAM7_DBGU_TX AT91C_PA28_DTXD
#else
#error "serial lines not defined for this SAM7 version"
#endif
/*===========================================================================*/
/* Driver exported variables. */
/*===========================================================================*/
#if USE_SAM7_USART0 || defined(__DOXYGEN__)
/** @brief USART0 serial driver identifier.*/
SerialDriver SD1;
#endif
#if USE_SAM7_USART1 || defined(__DOXYGEN__)
/** @brief USART1 serial driver identifier.*/
SerialDriver SD2;
#endif
#if USE_SAM7_DBGU_UART || defined(__DOXYGEN__)
/** @brief DBGU_UART serial driver identifier.*/
SerialDriver SD3;
#endif
/*===========================================================================*/
/* Driver local variables. */
/*===========================================================================*/
/** @brief Driver default configuration.*/
static const SerialConfig default_config = {
SERIAL_DEFAULT_BITRATE,
AT91C_US_USMODE_NORMAL | AT91C_US_CLKS_CLOCK |
AT91C_US_CHRL_8_BITS | AT91C_US_PAR_NONE | AT91C_US_NBSTOP_1_BIT
};
/*===========================================================================*/
/* Driver local functions. */
/*===========================================================================*/
/**
* @brief USART initialization.
*
* @param[in] sdp communication channel associated to the USART
* @param[in] config the architecture-dependent serial driver configuration
*/
static void usart_init(SerialDriver *sdp, const SerialConfig *config) {
AT91PS_USART u = sdp->usart;
/* Disables IRQ sources and stop operations.*/
u->US_IDR = 0xFFFFFFFF;
u->US_CR = AT91C_US_RSTRX | AT91C_US_RSTTX | AT91C_US_RSTSTA;
/* New parameters setup.*/
if (config->sc_mr & AT91C_US_OVER)
u->US_BRGR = MCK / (config->sc_speed * 8);
else
u->US_BRGR = MCK / (config->sc_speed * 16);
u->US_MR = config->sc_mr;
u->US_RTOR = 0;
u->US_TTGR = 0;
/* Enables operations and IRQ sources.*/
u->US_CR = AT91C_US_RXEN | AT91C_US_TXEN | AT91C_US_DTREN | AT91C_US_RTSEN;
u->US_IER = AT91C_US_RXRDY | AT91C_US_OVRE | AT91C_US_FRAME | AT91C_US_PARE |
AT91C_US_RXBRK;
}
/**
* @brief USART de-initialization.
*
* @param[in] u pointer to an USART I/O block
*/
static void usart_deinit(AT91PS_USART u) {
/* Disables IRQ sources and stop operations.*/
u->US_IDR = 0xFFFFFFFF;
u->US_CR = AT91C_US_RSTRX | AT91C_US_RSTTX | AT91C_US_RSTSTA;
u->US_MR = 0;
u->US_RTOR = 0;
u->US_TTGR = 0;
}
/**
* @brief Error handling routine.
*
* @param[in] err USART CSR register value
* @param[in] sdp communication channel associated to the USART
*/
static void set_error(SerialDriver *sdp, AT91_REG csr) {
ioflags_t sts = 0;
if (csr & AT91C_US_OVRE)
sts |= SD_OVERRUN_ERROR;
if (csr & AT91C_US_PARE)
sts |= SD_PARITY_ERROR;
if (csr & AT91C_US_FRAME)
sts |= SD_FRAMING_ERROR;
if (csr & AT91C_US_RXBRK)
sts |= SD_BREAK_DETECTED;
chSysLockFromIsr();
chIOAddFlagsI(sdp, sts);
chSysUnlockFromIsr();
}
#if defined(__GNUC__)
__attribute__((noinline))
#endif
#if !USE_SAM7_DBGU_UART
static
#endif
/**
* @brief Common IRQ handler.
*
* @param[in] sdp communication channel associated to the USART
*/
void sd_lld_serve_interrupt(SerialDriver *sdp) {
uint32_t csr;
AT91PS_USART u = sdp->usart;
csr = u->US_CSR;
if (csr & AT91C_US_RXRDY) {
chSysLockFromIsr();
sdIncomingDataI(sdp, u->US_RHR);
chSysUnlockFromIsr();
}
if ((u->US_IMR & AT91C_US_TXRDY) && (csr & AT91C_US_TXRDY)) {
msg_t b;
chSysLockFromIsr();
b = chOQGetI(&sdp->oqueue);
if (b < Q_OK) {
chIOAddFlagsI(sdp, IO_OUTPUT_EMPTY);
u->US_IDR = AT91C_US_TXRDY;
}
else
u->US_THR = b;
chSysUnlockFromIsr();
}
csr &= (AT91C_US_OVRE | AT91C_US_FRAME | AT91C_US_PARE | AT91C_US_RXBRK);
if (csr != 0) {
set_error(sdp, csr);
u->US_CR = AT91C_US_RSTSTA;
}
AT91C_BASE_AIC->AIC_EOICR = 0;
}
#if USE_SAM7_USART0 || defined(__DOXYGEN__)
static void notify1(GenericQueue *qp) {
(void)qp;
AT91C_BASE_US0->US_IER = AT91C_US_TXRDY;
}
#endif
#if USE_SAM7_USART1 || defined(__DOXYGEN__)
static void notify2(GenericQueue *qp) {
(void)qp;
AT91C_BASE_US1->US_IER = AT91C_US_TXRDY;
}
#endif
#if USE_SAM7_DBGU_UART || defined(__DOXYGEN__)
static void notify3(GenericQueue *qp) {
(void)qp;
AT91C_BASE_DBGU->DBGU_IER = AT91C_US_TXRDY;
}
#endif
/*===========================================================================*/
/* Driver interrupt handlers. */
/*===========================================================================*/
#if USE_SAM7_USART0 || defined(__DOXYGEN__)
/**
* @brief USART0 interrupt handler.
*
* @isr
*/
CH_IRQ_HANDLER(USART0IrqHandler) {
CH_IRQ_PROLOGUE();
sd_lld_serve_interrupt(&SD1);
AT91C_BASE_AIC->AIC_EOICR = 0;
CH_IRQ_EPILOGUE();
}
#endif
#if USE_SAM7_USART1 || defined(__DOXYGEN__)
/**
* @brief USART1 interrupt handler.
*
* @isr
*/
CH_IRQ_HANDLER(USART1IrqHandler) {
CH_IRQ_PROLOGUE();
sd_lld_serve_interrupt(&SD2);
AT91C_BASE_AIC->AIC_EOICR = 0;
CH_IRQ_EPILOGUE();
}
#endif
/* note - DBGU_UART IRQ is the SysIrq in board.c
since it's not vectored separately by the AIC.*/
/*===========================================================================*/
/* Driver exported functions. */
/*===========================================================================*/
/**
* @brief Low level serial driver initialization.
*
* @notapi
*/
void sd_lld_init(void) {
#if USE_SAM7_USART0
sdObjectInit(&SD1, NULL, notify1);
SD1.usart = AT91C_BASE_US0;
AT91C_BASE_PIOA->PIO_PDR = SAM7_USART0_RX | SAM7_USART0_TX;
AT91C_BASE_PIOA->PIO_ASR = SAM7_USART0_RX | SAM7_USART0_TX;
AT91C_BASE_PIOA->PIO_PPUDR = SAM7_USART0_RX | SAM7_USART0_TX;
AIC_ConfigureIT(AT91C_ID_US0,
AT91C_AIC_SRCTYPE_HIGH_LEVEL | SAM7_USART0_PRIORITY,
USART0IrqHandler);
#endif
#if USE_SAM7_USART1
sdObjectInit(&SD2, NULL, notify2);
SD2.usart = AT91C_BASE_US1;
AT91C_BASE_PIOA->PIO_PDR = SAM7_USART1_RX | SAM7_USART1_TX;
AT91C_BASE_PIOA->PIO_ASR = SAM7_USART1_RX | SAM7_USART1_TX;
AT91C_BASE_PIOA->PIO_PPUDR = SAM7_USART1_RX | SAM7_USART1_TX;
AIC_ConfigureIT(AT91C_ID_US1,
AT91C_AIC_SRCTYPE_HIGH_LEVEL | SAM7_USART1_PRIORITY,
USART1IrqHandler);
#endif
#if USE_SAM7_DBGU_UART
sdObjectInit(&SD3, NULL, notify3);
/* this is a little cheap, but OK for now since there's enough overlap
between dbgu and usart register maps. it means we can reuse all the
same usart interrupt handling and config that already exists.*/
SD3.usart = (AT91PS_USART)AT91C_BASE_DBGU;
AT91C_BASE_PIOA->PIO_PDR = SAM7_DBGU_RX | SAM7_DBGU_TX;
AT91C_BASE_PIOA->PIO_ASR = SAM7_DBGU_RX | SAM7_DBGU_TX;
AT91C_BASE_PIOA->PIO_PPUDR = SAM7_DBGU_RX | SAM7_DBGU_TX;
#endif
}
/**
* @brief Low level serial driver configuration and (re)start.
*
* @param[in] sdp pointer to a @p SerialDriver object
* @param[in] config the architecture-dependent serial driver configuration.
* If this parameter is set to @p NULL then a default
* configuration is used.
*
* @notapi
*/
void sd_lld_start(SerialDriver *sdp, const SerialConfig *config) {
if (config == NULL)
config = &default_config;
if (sdp->state == SD_STOP) {
#if USE_SAM7_USART0
if (&SD1 == sdp) {
/* Starts the clock and clears possible sources of immediate interrupts.*/
AT91C_BASE_PMC->PMC_PCER = (1 << AT91C_ID_US0);
/* Enables associated interrupt vector.*/
AIC_EnableIT(AT91C_ID_US0);
}
#endif
#if USE_SAM7_USART1
if (&SD2 == sdp) {
/* Starts the clock and clears possible sources of immediate interrupts.*/
AT91C_BASE_PMC->PMC_PCER = (1 << AT91C_ID_US1);
/* Enables associated interrupt vector.*/
AIC_EnableIT(AT91C_ID_US1);
}
#endif
/* Note - no explicit start for SD3 (DBGU_UART) since it's not included
in the AIC or PMC.*/
}
usart_init(sdp, config);
}
/**
* @brief Low level serial driver stop.
* @details De-initializes the USART, stops the associated clock, resets the
* interrupt vector.
*
* @param[in] sdp pointer to a @p SerialDriver object
*
* @notapi
*/
void sd_lld_stop(SerialDriver *sdp) {
if (sdp->state == SD_READY) {
usart_deinit(sdp->usart);
#if USE_SAM7_USART0
if (&SD1 == sdp) {
AT91C_BASE_PMC->PMC_PCDR = (1 << AT91C_ID_US0);
AIC_DisableIT(AT91C_ID_US0);
return;
}
#endif
#if USE_SAM7_USART1
if (&SD2 == sdp) {
AT91C_BASE_PMC->PMC_PCDR = (1 << AT91C_ID_US1);
AIC_DisableIT(AT91C_ID_US1);
return;
}
#endif
#if USE_SAM7_DBGU_UART
if (&SD3 == sdp) {
AT91C_BASE_DBGU->DBGU_IDR = 0xFFFFFFFF;
return;
}
#endif
}
}
#endif /* HAL_USE_SERIAL */
/** @} */
Reference in New Issue View Git Blame Copy Permalink