tinySA/demos/AVR/RT-ARDUINOMEGA
Giovanni Di Sirio e9990f73ef git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@8905 35acf78f-673a-0410-8e92-d51de3d6d3f4 2016-02-16 14:08:44 +00:00
..
Makefile git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@8905 35acf78f-673a-0410-8e92-d51de3d6d3f4 2016-02-16 14:08:44 +00:00
chconf.h [AVR] Make tickless default for Mega demo 2015-07-26 14:17:40 +00:00
halconf.h git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@8678 35acf78f-673a-0410-8e92-d51de3d6d3f4 2016-01-03 11:32:14 +00:00
main.c [AVR] Update thread to use definition macro 2015-06-04 12:49:42 +00:00
mcuconf.h MISRA-related fixes. 2015-03-03 10:02:55 +00:00
readme.txt Initial RT-3.0 Arduino Mega port 2014-06-29 23:15:11 +00:00

readme.txt

This file contains invisible Unicode characters!

This file contains invisible Unicode characters that may be processed differently from what appears below. If your use case is intentional and legitimate, you can safely ignore this warning. Use the Escape button to reveal hidden characters.

*****************************************************************************
** ChibiOS/RT port for Atmel AVR ATmega1280.                                **
*****************************************************************************

** TARGET **

The demo runs on an Arduino Mega board.

** The Demo **

The demo currently just prints the TestThread output on Serial0, which is
available on the board USB connector (FT232 converter), and toggles the LED
on PB7 (pin 13 on Arduino IDE) every second.

** Build Procedure **

The demo was built using the GCC AVR toolchain. It should build with WinAVR too!

** Notes **

This demo runs natively so the Arduino bootloader must be removed and the FUSEs
reprogrammed. The values used for fuses are LFUSE=0xe7 and HFUSE=0x99.