zcy
/
tinySA
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
tinySA/os/hal/platforms/SPC5xx/SIU_v1/pal_lld.h

424 lines
13 KiB
C
Raw Blame History

/*
SPC5 HAL - Copyright (C) 2013 STMicroelectronics
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/**
* @file SPC5xx/SIU_v1/pal_lld.h
* @brief SPC5xx SIU low level driver header.
*
* @addtogroup PAL
* @{
*/
#ifndef _PAL_LLD_H_
#define _PAL_LLD_H_
#if HAL_USE_PAL || defined(__DOXYGEN__)
/*===========================================================================*/
/* Unsupported modes and specific modes */
/*===========================================================================*/
#undef PAL_MODE_RESET
#undef PAL_MODE_UNCONNECTED
#undef PAL_MODE_INPUT
#undef PAL_MODE_INPUT_PULLUP
#undef PAL_MODE_INPUT_PULLDOWN
#undef PAL_MODE_INPUT_ANALOG
#undef PAL_MODE_OUTPUT_PUSHPULL
#undef PAL_MODE_OUTPUT_OPENDRAIN
/**
* @name SIU-specific PAL modes
* @{
*/
#define PAL_SPC5_PA_MASK (15U << 10)
#define PAL_SPC5_PA(n) ((n) << 10)
#define PAL_SPC5_OBE (1U << 9)
#define PAL_SPC5_IBE (1U << 8)
#define PAL_SPC5_DSC_10PF (0U << 6)
#define PAL_SPC5_DSC_20PF (1U << 6)
#define PAL_SPC5_DSC_30PF (2U << 6)
#define PAL_SPC5_DSC_50PF (3U << 6)
#define PAL_SPC5_ODE (1U << 5)
#define PAL_SPC5_HYS (1U << 4)
#define PAL_SPC5_WPE (1U << 1)
#define PAL_SPC5_WPS (1U << 0)
/** @} */
/**
* @name Pads mode constants
* @{
*/
/**
* @brief After reset state.
*/
#define PAL_MODE_RESET 0
/**
* @brief Safe state for <b>unconnected</b> pads.
*/
#define PAL_MODE_UNCONNECTED (PAL_SPC5_WPE | PAL_SPC5_WPS)
/**
* @brief Regular input high-Z pad.
*/
#define PAL_MODE_INPUT (PAL_SPC5_IBE)
/**
* @brief Input pad with weak pull up resistor.
*/
#define PAL_MODE_INPUT_PULLUP (PAL_SPC5_IBE | PAL_SPC5_WPE | \
PAL_SPC5_WPS)
/**
* @brief Input pad with weak pull down resistor.
*/
#define PAL_MODE_INPUT_PULLDOWN (PAL_SPC5_IBE | PAL_SPC5_WPE)
/**
* @brief Push-pull output pad.
*/
#define PAL_MODE_OUTPUT_PUSHPULL (PAL_SPC5_IBE | PAL_SPC5_OBE)
/**
* @brief Open-drain output pad.
*/
#define PAL_MODE_OUTPUT_OPENDRAIN (PAL_SPC5_IBE | PAL_SPC5_OBE | \
PAL_SPC5_ODE)
/**
* @brief Alternate "n" output pad.
* @note Both the IBE and OBE bits are specified in this mask, the OBE
* bit is not required for some PCRs but in that case it is
* ignored.
*/
#define PAL_MODE_OUTPUT_ALTERNATE(n) (PAL_SPC5_IBE | PAL_SPC5_OBE | \
PAL_SPC5_PA(n))
/** @} */
/*===========================================================================*/
/* I/O Ports Types and constants. */
/*===========================================================================*/
/**
* @brief Width, in bits, of an I/O port.
*/
#define PAL_IOPORTS_WIDTH 16
/**
* @brief Whole port mask.
* @brief This macro specifies all the valid bits into a port.
*/
#define PAL_WHOLE_PORT ((ioportmask_t)0xFFFF)
/**
* @brief Digital I/O port sized unsigned type.
*/
typedef uint16_t ioportmask_t;
/**
* @brief Port Identifier.
* @details This type can be a scalar or some kind of pointer, do not make
* any assumption about it, use the provided macros when populating
* variables of this type.
*/
typedef uint32_t ioportid_t;
/**
* @brief Digital I/O modes.
*/
typedef uint16_t iomode_t;
/**
* @brief SIU/SIUL register initializer type.
*/
typedef struct {
int32_t pcr_index;
uint8_t gpdo_value;
iomode_t pcr_value;
} spc_siu_init_t;
/**
* @brief Generic I/O ports static initializer.
* @details An instance of this structure must be passed to @p palInit() at
* system startup time in order to initialized the digital I/O
* subsystem. This represents only the initial setup, specific pads
* or whole ports can be reprogrammed at later time.
* @note Implementations may extend this structure to contain more,
* architecture dependent, fields.
*/
typedef struct {
const spc_siu_init_t *inits;
} PALConfig;
/*===========================================================================*/
/* I/O Ports Identifiers. */
/*===========================================================================*/
/**
* @name Port identifiers
* @{
*/
#define PORT0 0
#define PORT1 1
#define PORT2 2
#define PORT3 3
#define PORT4 4
#define PORT5 5
#define PORT6 6
#define PORT7 7
#define PORT8 8
#define PORT9 9
#define PORT10 10
#define PORT11 11
#define PORT12 12
#define PORT13 13
#define PORT14 14
#define PORT15 15
#define PORT16 16
#define PORT17 17
#define PORT18 18
#define PORT19 19
#define PORT20 20
#define PORT21 21
#define PORT22 22
#define PORT23 23
#define PORT24 24
#define PORT25 25
#define PORT26 26
#define PORT27 27
#define PORT28 28
#define PORT29 29
#define PORT30 30
#define PORT31 31
/** @} */
/*===========================================================================*/
/* Implementation, some of the following macros could be implemented as */
/* functions, if so please put them in pal_lld.c. */
/*===========================================================================*/
/**
* @brief Port bit helper macro.
* @note Overrides the one in @p pal.h.
*
* @param[in] n bit position within the port
*
* @return The bit mask.
*/
#define PAL_PORT_BIT(n) ((ioportmask_t)(0x8000U >> (n)))
/**
* @brief Low level PAL subsystem initialization.
*
* @param[in] config architecture-dependent ports configuration
*
* @notapi
*/
#define pal_lld_init(config) _pal_lld_init(config)
#if SPC5_SIU_SUPPORTS_PORTS || defined(__DOXYGEN__)
/**
* @brief Reads the physical I/O port states.
*
* @param[in] port port identifier
* @return The port bits.
*
* @notapi
*/
#define pal_lld_readport(port) (((volatile uint16_t *)SIU.PGPDI)[port])
/**
* @brief Reads the output latch.
* @details The purpose of this function is to read back the latched output
* value.
*
* @param[in] port port identifier
* @return The latched logical states.
*
* @notapi
*/
#define pal_lld_readlatch(port) (((volatile uint16_t *)SIU.PGPDO)[port])
/**
* @brief Writes a bits mask on a I/O port.
*
* @param[in] port port identifier
* @param[in] bits bits to be written on the specified port
*
* @notapi
*/
#define pal_lld_writeport(port, bits) \
(((volatile uint16_t *)SIU.PGPDO)[port] = (bits))
/**
* @brief Reads a group of bits.
*
* @param[in] port port identifier
* @param[in] mask group mask
* @param[in] offset group bit offset within the port
* @return The group logical states.
*
* @notapi
*/
#define pal_lld_readgroup(port, mask, offset) \
_pal_lld_readgroup(port, mask, offset)
/**
* @brief Writes a group of bits.
*
* @param[in] port port identifier
* @param[in] mask group mask
* @param[in] offset group bit offset within the port
* @param[in] bits bits to be written. Values exceeding the group width
* are masked.
*
* @notapi
*/
#define pal_lld_writegroup(port, mask, offset, bits) \
_pal_lld_writegroup(port, mask, offset, bits)
#endif /* SPC5_SIU_SUPPORTS_PORTS */
/**
* @brief Pads group mode setup.
* @details This function programs a pads group belonging to the same port
* with the specified mode.
* @note Programming an unknown or unsupported mode is silently ignored.
*
* @param[in] port port identifier
* @param[in] mask group mask
* @param[in] offset group bit offset within the port
* @param[in] mode group mode
*
* @notapi
*/
#define pal_lld_setgroupmode(port, mask, offset, mode) \
_pal_lld_setgroupmode(port, mask << offset, mode)
/**
* @brief Reads a logical state from an I/O pad.
* @note The @ref PAL provides a default software implementation of this
* functionality, implement this function if can optimize it by using
* special hardware functionalities or special coding.
*
* @param[in] port port identifier
* @param[in] pad pad number within the port
* @return The logical state.
* @retval PAL_LOW low logical state.
* @retval PAL_HIGH high logical state.
*
* @notapi
*/
#define pal_lld_readpad(port, pad) \
(SIU.GPDI[((port) * 16) + (pad)].R)
/**
* @brief Writes a logical state on an output pad.
* @note This function is not meant to be invoked directly by the
* application code.
* @note The @ref PAL provides a default software implementation of this
* functionality, implement this function if can optimize it by using
* special hardware functionalities or special coding.
*
* @param[in] port port identifier
* @param[in] pad pad number within the port
* @param[in] bit logical value, the value must be @p PAL_LOW or
* @p PAL_HIGH
*
* @notapi
*/
#define pal_lld_writepad(port, pad, bit) \
(SIU.GPDO[((port) * 16) + (pad)].R = (bit))
/**
* @brief Sets a pad logical state to @p PAL_HIGH.
*
* @param[in] port port identifier
* @param[in] pad pad number within the port
*
* @notapi
*/
#define pal_lld_setpad(port, pad) \
(SIU.GPDO[((port) * 16) + (pad)].R = 1)
/**
* @brief Clears a pad logical state to @p PAL_LOW.
*
* @param[in] port port identifier
* @param[in] pad pad number within the port
*
* @notapi
*/
#define pal_lld_clearpad(port, pad) \
(SIU.GPDO[((port) * 16) + (pad)].R = 0)
/**
* @brief Toggles a pad logical state.
* @note The @ref PAL provides a default software implementation of this
* functionality, implement this function if can optimize it by using
* special hardware functionalities or special coding.
*
* @param[in] port port identifier
* @param[in] pad pad number within the port
*
* @notapi
*/
#define pal_lld_togglepad(port, pad) \
(SIU.GPDO[((port) * 16) + (pad)].R = ~SIU.GPDO[((port) * 16) + (pad)].R)
/**
* @brief Pad mode setup.
* @details This function programs a pad with the specified mode.
* @note The @ref PAL provides a default software implementation of this
* functionality, implement this function if can optimize it by using
* special hardware functionalities or special coding.
* @note Programming an unknown or unsupported mode is silently ignored.
*
* @param[in] port port identifier
* @param[in] pad pad number within the port
* @param[in] mode pad mode
*
* @notapi
*/
#define pal_lld_setpadmode(port, pad, mode)
extern const PALConfig pal_default_config;
#ifdef __cplusplus
extern "C" {
#endif
void _pal_lld_init(const PALConfig *config);
ioportmask_t _pal_lld_readgroup(ioportid_t port,
ioportmask_t mask,
uint_fast8_t offset);
void _pal_lld_writegroup(ioportid_t port,
ioportmask_t mask,
uint_fast8_t offset,
ioportmask_t bits);
void _pal_lld_setgroupmode(ioportid_t port,
ioportmask_t mask,
iomode_t mode);
#ifdef __cplusplus
}
#endif
#endif /* HAL_USE_PAL */
#endif /* _PAL_LLD_H_ */
/** @} */
Reference in New Issue View Git Blame Copy Permalink