274 lines
8.9 KiB
C
274 lines
8.9 KiB
C
/*
|
|
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
|
|
|
|
Licensed under the Apache License, Version 2.0 (the "License");
|
|
you may not use this file except in compliance with the License.
|
|
You may obtain a copy of the License at
|
|
|
|
http://www.apache.org/licenses/LICENSE-2.0
|
|
|
|
Unless required by applicable law or agreed to in writing, software
|
|
distributed under the License is distributed on an "AS IS" BASIS,
|
|
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
See the License for the specific language governing permissions and
|
|
limitations under the License.
|
|
*/
|
|
|
|
/**
|
|
* @file STM32L4xx/hal_lld.c
|
|
* @brief STM32L4xx HAL subsystem low level driver source.
|
|
*
|
|
* @addtogroup HAL
|
|
* @{
|
|
*/
|
|
|
|
#include "hal.h"
|
|
|
|
/*===========================================================================*/
|
|
/* Driver local definitions. */
|
|
/*===========================================================================*/
|
|
|
|
/*===========================================================================*/
|
|
/* Driver exported variables. */
|
|
/*===========================================================================*/
|
|
|
|
/**
|
|
* @brief CMSIS system core clock variable.
|
|
* @note It is declared in system_stm32f7xx.h.
|
|
*/
|
|
uint32_t SystemCoreClock = STM32_HCLK;
|
|
|
|
/*===========================================================================*/
|
|
/* Driver local variables and types. */
|
|
/*===========================================================================*/
|
|
|
|
/*===========================================================================*/
|
|
/* Driver local functions. */
|
|
/*===========================================================================*/
|
|
|
|
/**
|
|
* @brief Initializes the backup domain.
|
|
* @note WARNING! Changing clock source impossible without resetting
|
|
* of the whole BKP domain.
|
|
*/
|
|
static void hal_lld_backup_domain_init(void) {
|
|
|
|
/* Reset BKP domain if different clock source selected.*/
|
|
if ((RCC->BDCR & STM32_RTCSEL_MASK) != STM32_RTCSEL) {
|
|
/* Backup domain reset.*/
|
|
RCC->BDCR = RCC_BDCR_BDRST;
|
|
RCC->BDCR = 0;
|
|
}
|
|
|
|
#if HAL_USE_RTC
|
|
/* If the backup domain hasn't been initialized yet then proceed with
|
|
initialization.*/
|
|
if ((RCC->BDCR & RCC_BDCR_RTCEN) == 0) {
|
|
/* Selects clock source.*/
|
|
RCC->BDCR |= STM32_RTCSEL;
|
|
|
|
/* RTC clock enabled.*/
|
|
RCC->BDCR |= RCC_BDCR_RTCEN;
|
|
}
|
|
#endif /* HAL_USE_RTC */
|
|
}
|
|
|
|
/*===========================================================================*/
|
|
/* Driver interrupt handlers. */
|
|
/*===========================================================================*/
|
|
|
|
/*===========================================================================*/
|
|
/* Driver exported functions. */
|
|
/*===========================================================================*/
|
|
|
|
/**
|
|
* @brief Low level HAL driver initialization.
|
|
*
|
|
* @notapi
|
|
*/
|
|
void hal_lld_init(void) {
|
|
|
|
/* Reset of all peripherals. AHB3 is not reseted because it could have
|
|
been initialized in the board initialization file (board.c).*/
|
|
rccResetAHB1(~0);
|
|
rccResetAHB2(~0);
|
|
rccResetAHB3(~0);
|
|
rccResetAPB1R1(~RCC_APB1RSTR1_PWRRST);
|
|
rccResetAPB1R2(~0);
|
|
rccResetAPB2(~0);
|
|
|
|
/* PWR clock enabled.*/
|
|
rccEnablePWRInterface(FALSE);
|
|
|
|
/* Initializes the backup domain.*/
|
|
hal_lld_backup_domain_init();
|
|
|
|
#if defined(STM32_DMA_REQUIRED)
|
|
dmaInit();
|
|
#endif
|
|
|
|
/* Programmable voltage detector enable.*/
|
|
#if STM32_PVD_ENABLE
|
|
PWR->CR1 |= PWR_CR1_PVDE | (STM32_PLS & STM32_PLS_MASK);
|
|
#endif /* STM32_PVD_ENABLE */
|
|
}
|
|
|
|
/**
|
|
* @brief STM32F2xx clocks and PLL initialization.
|
|
* @note All the involved constants come from the file @p board.h.
|
|
* @note This function should be invoked just after the system reset.
|
|
*
|
|
* @special
|
|
*/
|
|
void stm32_clock_init(void) {
|
|
|
|
#if !STM32_NO_INIT
|
|
/* PWR clock enable.*/
|
|
RCC->APB1ENR1 = RCC_APB1ENR1_PWREN;
|
|
|
|
/* Initial clocks setup and wait for MSI stabilization, the MSI clock is
|
|
always enabled because it is the fall back clock when PLL the fails.
|
|
Trim fields are not altered from reset values.*/
|
|
RCC->CR = RCC_CR_MSION | STM32_MSIRANGE_4M;
|
|
while ((RCC->CR & RCC_CR_MSIRDY) == 0)
|
|
; /* Wait until MSI is stable. */
|
|
|
|
/* Clocking from MSI, in case MSI was not the default source.*/
|
|
RCC->CFGR = 0;
|
|
while ((RCC->CFGR & RCC_CFGR_SWS) != RCC_CFGR_SWS_MSI)
|
|
; /* Wait until MSI is selected. */
|
|
|
|
/* Core voltage setup.*/
|
|
PWR->CR1 = STM32_VOS;
|
|
while ((PWR->SR2 & PWR_SR2_VOSF) != 0) /* Wait until regulator is */
|
|
; /* stable. */
|
|
|
|
#if STM32_HSI16_ENABLED
|
|
/* HSI activation.*/
|
|
RCC->CR |= RCC_CR_HSION;
|
|
while ((RCC->CR & RCC_CR_HSIRDY) == 0)
|
|
; /* Wait until HSI is stable. */
|
|
#endif
|
|
|
|
#if STM32_HSE_ENABLED
|
|
#if defined(STM32_HSE_BYPASS)
|
|
/* HSE Bypass.*/
|
|
RCC->CR |= RCC_CR_HSEON | RCC_CR_HSEBYP;
|
|
#endif
|
|
/* HSE activation.*/
|
|
RCC->CR |= RCC_CR_HSEON;
|
|
while ((RCC->CR & RCC_CR_HSERDY) == 0)
|
|
; /* Wait until HSE is stable. */
|
|
#endif
|
|
|
|
#if STM32_LSI_ENABLED
|
|
/* LSI activation.*/
|
|
RCC->CSR |= RCC_CSR_LSION;
|
|
while ((RCC->CSR & RCC_CSR_LSIRDY) == 0)
|
|
; /* Wait until LSI is stable. */
|
|
#endif
|
|
|
|
/* Backup domain access enabled and left open.*/
|
|
PWR->CR1 |= PWR_CR1_DBP;
|
|
|
|
#if STM32_LSE_ENABLED
|
|
/* LSE activation.*/
|
|
#if defined(STM32_LSE_BYPASS)
|
|
/* LSE Bypass.*/
|
|
RCC->BDCR |= STM32_LSEDRV | RCC_BDCR_LSEON | RCC_BDCR_LSEBYP;
|
|
#else
|
|
/* No LSE Bypass.*/
|
|
RCC->BDCR |= STM32_LSEDRV | RCC_BDCR_LSEON;
|
|
#endif
|
|
while ((RCC->BDCR & RCC_BDCR_LSERDY) == 0)
|
|
; /* Wait until LSE is stable. */
|
|
#endif
|
|
|
|
#if STM32_MSIPLL_ENABLED
|
|
/* MSI PLL activation.*/
|
|
RCC->CR |= RCC_CR_MSIPLLEN;
|
|
#endif
|
|
|
|
#if STM32_ACTIVATE_PLL || STM32_ACTIVATE_PLLSAI1 || STM32_ACTIVATE_PLLSAI2
|
|
/* PLLM and PLLSRC are common to all PLLs.*/
|
|
RCC->PLLCFGR = STM32_PLLR | STM32_PLLREN |
|
|
STM32_PLLQ | STM32_PLLQEN |
|
|
STM32_PLLP | STM32_PLLPEN |
|
|
STM32_PLLN | STM32_PLLM |
|
|
STM32_PLLSRC;
|
|
#endif
|
|
|
|
#if STM32_ACTIVATE_PLL
|
|
/* PLL activation.*/
|
|
RCC->CR |= RCC_CR_PLLON;
|
|
|
|
/* Waiting for PLL lock.*/
|
|
while ((RCC->CR & RCC_CR_PLLRDY) == 0)
|
|
;
|
|
#endif /* STM32_OVERDRIVE_REQUIRED */
|
|
|
|
#if STM32_ACTIVATE_PLLSAI1
|
|
/* PLLSAI1 activation.*/
|
|
RCC->PLLSAI1CFGR = STM32_PLLSAI1R | STM32_PLLSAI1REN |
|
|
STM32_PLLSAI1Q | STM32_PLLSAI1QEN |
|
|
STM32_PLLSAI1P | STM32_PLLSAI1PEN |
|
|
STM32_PLLSAI1N;
|
|
RCC->CR |= RCC_CR_PLLSAI1ON;
|
|
|
|
/* Waiting for PLL lock.*/
|
|
while ((RCC->CR & RCC_CR_PLLSAI1RDY) == 0)
|
|
;
|
|
#endif
|
|
|
|
#if STM32_ACTIVATE_PLLSAI2
|
|
/* PLLSAI2 activation.*/
|
|
RCC->PLLSAI2CFGR = STM32_PLLSAI2R | STM32_PLLSAI2REN |
|
|
STM32_PLLSAI2P | STM32_PLLSAI2PEN |
|
|
STM32_PLLSAI2N;
|
|
RCC->CR |= RCC_CR_PLLSAI2ON;
|
|
|
|
/* Waiting for PLL lock.*/
|
|
while ((RCC->CR & RCC_CR_PLLSAI2RDY) == 0)
|
|
;
|
|
#endif
|
|
|
|
/* Other clock-related settings (dividers, MCO etc).*/
|
|
RCC->CFGR = STM32_MCOPRE | STM32_MCOSEL | STM32_STOPWUCK |
|
|
STM32_PPRE2 | STM32_PPRE1 | STM32_HPRE;
|
|
|
|
/* CCIPR register initialization, note, must take care of the _OFF
|
|
pseudo settings.*/
|
|
{
|
|
uint32_t ccipr = STM32_DFSDMSEL | STM32_SWPMI1SEL | STM32_ADCSEL |
|
|
STM32_CLK48SEL | STM32_LPTIM2SEL | STM32_LPTIM1SEL |
|
|
STM32_I2C3SEL | STM32_I2C2SEL | STM32_I2C1SEL |
|
|
STM32_UART5SEL | STM32_UART4SEL | STM32_USART3SEL |
|
|
STM32_USART2SEL | STM32_USART1SEL | STM32_LPUART1SEL;
|
|
#if STM32_SAI2SEL != STM32_SAI2SEL_OFF
|
|
ccipr |= STM32_SAI2SEL;
|
|
#endif
|
|
#if STM32_SAI1SEL != STM32_SAI1SEL_OFF
|
|
ccipr |= STM32_SAI1SEL;
|
|
#endif
|
|
RCC->CCIPR = ccipr;
|
|
}
|
|
|
|
/* Flash setup.*/
|
|
FLASH->ACR = FLASH_ACR_DCEN | FLASH_ACR_ICEN | FLASH_ACR_PRFTEN |
|
|
STM32_FLASHBITS;
|
|
|
|
/* Switching to the configured clock source if it is different from MSI.*/
|
|
#if (STM32_SW != STM32_SW_MSI)
|
|
RCC->CFGR |= STM32_SW; /* Switches on the selected clock source. */
|
|
while ((RCC->CFGR & RCC_CFGR_SWS) != (STM32_SW << 2))
|
|
;
|
|
#endif
|
|
#endif /* STM32_NO_INIT */
|
|
|
|
/* SYSCFG clock enabled here because it is a multi-functional unit shared
|
|
among multiple drivers.*/
|
|
rccEnableAPB2(RCC_APB2ENR_SYSCFGEN, TRUE);
|
|
}
|
|
|
|
/** @} */
|