350 lines
10 KiB
C
350 lines
10 KiB
C
/*
|
|
* Licensed under ST Liberty SW License Agreement V2, (the "License");
|
|
* You may not use this file except in compliance with the License.
|
|
* You may obtain a copy of the License at:
|
|
*
|
|
* http://www.st.com/software_license_agreement_liberty_v2
|
|
*
|
|
* Unless required by applicable law or agreed to in writing, software
|
|
* distributed under the License is distributed on an "AS IS" BASIS,
|
|
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
* See the License for the specific language governing permissions and
|
|
* limitations under the License.
|
|
*/
|
|
|
|
/**
|
|
* @file SPC560Pxx/pwm_lld.h
|
|
* @brief SPC560Pxx low level FlexPWM driver header.
|
|
*
|
|
* @addtogroup PWM
|
|
* @{
|
|
*/
|
|
|
|
#ifndef _PWM_LLD_H_
|
|
#define _PWM_LLD_H_
|
|
|
|
#if HAL_USE_PWM || defined(__DOXYGEN__)
|
|
|
|
/*===========================================================================*/
|
|
/* Driver constants. */
|
|
/*===========================================================================*/
|
|
|
|
/**
|
|
* @name LINIER register bits definitions
|
|
* @{
|
|
*/
|
|
#define SPC5_STS_CMPF0 (1U << 0)
|
|
#define SPC5_STS_CMPF1 (1U << 1)
|
|
#define SPC5_STS_CMPF2 (1U << 2)
|
|
#define SPC5_STS_CMPF3 (1U << 3)
|
|
#define SPC5_STS_CMPF4 (1U << 4)
|
|
#define SPC5_STS_CMPF5 (1U << 5)
|
|
#define SPC5_STS_CFX0 (1U << 6)
|
|
#define SPC5_STS_CFX1 (1U << 7)
|
|
#define SPC5_STS_RF (1U << 12)
|
|
#define SPC5_STS_REF (1U << 13)
|
|
#define SPC5_STS_RUF (1U << 14)
|
|
/** @} */
|
|
|
|
/**
|
|
* @brief Number of PWM channels per PWM driver.
|
|
*/
|
|
#define PWM_CHANNELS 2
|
|
|
|
/**
|
|
* @brief Complementary output modes mask.
|
|
* @note This is an SPC5-specific setting.
|
|
*/
|
|
#define PWM_COMPLEMENTARY_OUTPUT_MASK 0xF0
|
|
|
|
/**
|
|
* @brief Complementary output not driven.
|
|
* @note This is an SPC5-specific setting.
|
|
*/
|
|
#define PWM_COMPLEMENTARY_OUTPUT_DISABLED 0x00
|
|
|
|
/**
|
|
* @brief Complementary output, active is logic level one.
|
|
* @note This is an SPC5-specific setting.
|
|
*/
|
|
#define PWM_COMPLEMENTARY_OUTPUT_ACTIVE_HIGH 0x10
|
|
|
|
/**
|
|
* @brief Complementary output, active is logic level zero.
|
|
* @note This is an SPC5-specific setting.
|
|
*/
|
|
#define PWM_COMPLEMENTARY_OUTPUT_ACTIVE_LOW 0x20
|
|
|
|
/**
|
|
* @brief Edge-Aligned PWM functional mode.
|
|
* @note This is an SPC5-specific setting.
|
|
*/
|
|
#define EDGE_ALIGNED_PWM 0x01
|
|
|
|
/**
|
|
* @brief Center-Aligned PWM functional mode.
|
|
* @note This is an SPC5-specific setting.
|
|
*/
|
|
#define CENTER_ALIGNED_PWM 0x02
|
|
|
|
/*===========================================================================*/
|
|
/* Driver pre-compile time settings. */
|
|
/*===========================================================================*/
|
|
|
|
/**
|
|
* @name Configuration options
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief PWMD1 driver enable switch.
|
|
* @details If set to @p TRUE the support for PWMD1 is included.
|
|
* @note The default is @p TRUE.
|
|
*/
|
|
#if !defined(SPC5_PWM_USE_SMOD0) || defined(__DOXYGEN__)
|
|
#define SPC5_PWM_USE_SMOD0 TRUE
|
|
#endif
|
|
|
|
/**
|
|
* @brief PWMD2 driver enable switch.
|
|
* @details If set to @p TRUE the support for PWMD2 is included.
|
|
* @note The default is @p TRUE.
|
|
*/
|
|
#if !defined(SPC5_PWM_USE_SMOD1) || defined(__DOXYGEN__)
|
|
#define SPC5_PWM_USE_SMOD1 TRUE
|
|
#endif
|
|
|
|
/**
|
|
* @brief PWMD3 driver enable switch.
|
|
* @details If set to @p TRUE the support for PWMD3 is included.
|
|
* @note The default is @p TRUE.
|
|
*/
|
|
#if !defined(SPC5_PWM_USE_SMOD2) || defined(__DOXYGEN__)
|
|
#define SPC5_PWM_USE_SMOD2 TRUE
|
|
#endif
|
|
|
|
/**
|
|
* @brief PWMD4 driver enable switch.
|
|
* @details If set to @p TRUE the support for PWMD4 is included.
|
|
* @note The default is @p TRUE.
|
|
*/
|
|
#if !defined(SPC5_PWM_USE_SMOD3) || defined(__DOXYGEN__)
|
|
#define SPC5_PWM_USE_SMOD3 TRUE
|
|
#endif
|
|
|
|
/**
|
|
* @brief PWMD1 interrupt priority level setting.
|
|
*/
|
|
#if !defined(SPC5_PWM_SMOD0_PRIORITY) || defined(__DOXYGEN__)
|
|
#define SPC5_PWM_SMOD0_PRIORITY 7
|
|
#endif
|
|
|
|
/**
|
|
* @brief PWMD2 interrupt priority level setting.
|
|
*/
|
|
#if !defined(SPC5_PWM_SMOD1_PRIORITY) || defined(__DOXYGEN__)
|
|
#define SPC5_PWM_SMOD1_PRIORITY 7
|
|
#endif
|
|
|
|
/**
|
|
* @brief PWMD3 interrupt priority level setting.
|
|
*/
|
|
#if !defined(SPC5_PWM_SMOD2_PRIORITY) || defined(__DOXYGEN__)
|
|
#define SPC5_PWM_SMOD2_PRIORITY 7
|
|
#endif
|
|
|
|
/**
|
|
* @brief PWMD4 interrupt priority level setting.
|
|
*/
|
|
#if !defined(SPC5_PWM_SMOD3_PRIORITY) || defined(__DOXYGEN__)
|
|
#define SPC5_PWM_SMOD3_PRIORITY 7
|
|
#endif
|
|
|
|
/**
|
|
* @brief FlexPWM-0 peripheral configuration when started.
|
|
* @note The default configuration is 1 (always run) in run mode and
|
|
* 2 (only halt) in low power mode. The defaults of the run modes
|
|
* are defined in @p hal_lld.h.
|
|
*/
|
|
#if !defined(SPC5_PWM_FLEXPWM0_START_PCTL) || defined(__DOXYGEN__)
|
|
#define SPC5_PWM_FLEXPWM0_START_PCTL (SPC5_ME_PCTL_RUN(1) | \
|
|
SPC5_ME_PCTL_LP(2))
|
|
#endif
|
|
|
|
/**
|
|
* @brief FlexPWM-0 peripheral configuration when stopped.
|
|
* @note The default configuration is 0 (never run) in run mode and
|
|
* 0 (never run) in low power mode. The defaults of the run modes
|
|
* are defined in @p hal_lld.h.
|
|
*/
|
|
#if !defined(SPC5_PWM_FLEXPWM0_STOP_PCTL) || defined(__DOXYGEN__)
|
|
#define SPC5_PWM_FLEXPWM0_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \
|
|
SPC5_ME_PCTL_LP(0))
|
|
#endif
|
|
|
|
/*===========================================================================*/
|
|
/* Configuration checks. */
|
|
/*===========================================================================*/
|
|
|
|
#if SPC5_PWM_USE_SMOD0 && !SPC5_HAS_FLEXPWM0
|
|
#error "SMOD0 not present in the selected device"
|
|
#endif
|
|
|
|
#if SPC5_PWM_USE_SMOD1 && !SPC5_HAS_FLEXPWM0
|
|
#error "SMOD1 not present in the selected device"
|
|
#endif
|
|
|
|
#if SPC5_PWM_USE_SMDO2 && !SPC5_HAS_FLEXPWM0
|
|
#error "SMOD2 not present in the selected device"
|
|
#endif
|
|
|
|
#if SPC5_PWM_USE_SMOD3 && !SPC5_HAS_FLEXPWM0
|
|
#error "SMOD3 not present in the selected device"
|
|
#endif
|
|
|
|
#if (!SPC5_PWM_USE_SMOD0 && !SPC5_PWM_USE_SMOD1 && \
|
|
!SPC5_PWM_USE_SMOD2 && !SPC5_PWM_USE_SMOD3) && SPC5_PWM_USE_FLEXPWM0
|
|
#error "PWM driver activated but no SubModule assigned"
|
|
#endif
|
|
|
|
/*===========================================================================*/
|
|
/* Driver data structures and types. */
|
|
/*===========================================================================*/
|
|
|
|
/**
|
|
* @brief PWM mode type.
|
|
*/
|
|
typedef uint32_t pwmmode_t;
|
|
|
|
/**
|
|
* @brief PWM channel type.
|
|
*/
|
|
typedef uint8_t pwmchannel_t;
|
|
|
|
/**
|
|
* @brief PWM counter type.
|
|
*/
|
|
typedef uint16_t pwmcnt_t;
|
|
|
|
/**
|
|
* @brief PWM driver channel configuration structure.
|
|
*/
|
|
typedef struct {
|
|
/**
|
|
* @brief Channel active logic level.
|
|
*/
|
|
pwmmode_t mode;
|
|
/**
|
|
* @brief Channel callback pointer.
|
|
* @note This callback is invoked on the channel compare event. If set to
|
|
* @p NULL then the callback is disabled.
|
|
*/
|
|
pwmcallback_t callback;
|
|
/* End of the mandatory fields.*/
|
|
} PWMChannelConfig;
|
|
|
|
/**
|
|
* @brief PWM driver configuration structure.
|
|
*/
|
|
typedef struct {
|
|
/**
|
|
* @brief Timer clock in Hz.
|
|
* @note The low level can use assertions in order to catch invalid
|
|
* frequency specifications.
|
|
*/
|
|
uint32_t frequency;
|
|
/**
|
|
* @brief PWM period in ticks.
|
|
* @note The low level can use assertions in order to catch invalid
|
|
* period specifications.
|
|
*/
|
|
pwmcnt_t period;
|
|
/**
|
|
* @brief Periodic callback pointer.
|
|
* @note This callback is invoked on PWM counter reset. If set to
|
|
* @p NULL then the callback is disabled.
|
|
*/
|
|
pwmcallback_t callback;
|
|
/**
|
|
* @brief Channels configurations.
|
|
*/
|
|
PWMChannelConfig channels[PWM_CHANNELS];
|
|
/* End of the mandatory fields.*/
|
|
/**
|
|
* @brief PWM functional mode.
|
|
*/
|
|
pwmmode_t mode;
|
|
} PWMConfig;
|
|
|
|
/**
|
|
* @brief Structure representing a PWM driver.
|
|
*/
|
|
struct PWMDriver {
|
|
/**
|
|
* @brief Driver state.
|
|
*/
|
|
pwmstate_t state;
|
|
/**
|
|
* @brief Current driver configuration data.
|
|
*/
|
|
const PWMConfig *config;
|
|
/**
|
|
* @brief Current PWM period in ticks.
|
|
*/
|
|
pwmcnt_t period;
|
|
#if defined(PWM_DRIVER_EXT_FIELDS)
|
|
PWM_DRIVER_EXT_FIELDS
|
|
#endif
|
|
/* End of the mandatory fields.*/
|
|
/**
|
|
* @Pointer to the volatile FlexPWM registers block.
|
|
*/
|
|
volatile struct FLEXPWM_tag *flexpwmp;
|
|
};
|
|
|
|
/*===========================================================================*/
|
|
/* Driver macros. */
|
|
/*===========================================================================*/
|
|
|
|
|
|
/*===========================================================================*/
|
|
/* External declarations. */
|
|
/*===========================================================================*/
|
|
|
|
#if SPC5_PWM_USE_SMOD0 && !defined(__DOXYGEN__)
|
|
extern PWMDriver PWMD1;
|
|
#endif
|
|
|
|
#if SPC5_PWM_USE_SMOD1 && !defined(__DOXYGEN__)
|
|
extern PWMDriver PWMD2;
|
|
#endif
|
|
|
|
#if SPC5_PWM_USE_SMOD2 && !defined(__DOXYGEN__)
|
|
extern PWMDriver PWMD3;
|
|
#endif
|
|
|
|
#if SPC5_PWM_USE_SMOD3 && !defined(__DOXYGEN__)
|
|
extern PWMDriver PWMD4;
|
|
#endif
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
void pwm_lld_init(void);
|
|
void pwm_lld_start(PWMDriver *pwmp);
|
|
void pwm_lld_stop(PWMDriver *pwmp);
|
|
void pwm_lld_enable_channel(PWMDriver *pwmp,
|
|
pwmchannel_t channel,
|
|
pwmcnt_t width);
|
|
void pwm_lld_disable_channel(PWMDriver *pwmp, pwmchannel_t channel);
|
|
void pwm_lld_change_period(PWMDriver *pwmp, pwmcnt_t period);
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif /* HAL_USE_PWM */
|
|
|
|
#endif /* _PWM_LLD_H_ */
|
|
|
|
/** @} */
|