zcy
/
tinySA
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
tinySA/os/hal/ports/STM32/LLD/DACv1/dac_lld.h

463 lines
13 KiB
C
Raw Blame History

/*
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/**
* @file STM32/DACv1/dac_lld.h
* @brief STM32 DAC subsystem low level driver header.
*
* @addtogroup DAC
* @{
*/
#ifndef _DAC_LLD_H_
#define _DAC_LLD_H_
#include "stm32_tim.h"
#if HAL_USE_DAC || defined(__DOXYGEN__)
/*===========================================================================*/
/* Driver constants. */
/*===========================================================================*/
/**
* @name DAC trigger modes
* @{
*/
#define DAC_TRG_MASK 7U
#define DAC_TRG(n) (n)
#define DAC_TRG_EXT 6U
#define DAC_TRG_SW 7U
/** @} */
/*===========================================================================*/
/* Driver pre-compile time settings. */
/*===========================================================================*/
/**
* @name Configuration options
* @{
*/
/**
* @brief Enables the DAC dual mode.
* @note In dual mode DAC second channels cannot be accessed individually.
*/
#if !defined(STM32_DAC_DUAL_MODE) || defined(__DOXYGEN__)
#define STM32_DAC_DUAL_MODE FALSE
#endif
/**
* @brief DAC1 CH1 driver enable switch.
* @details If set to @p TRUE the support for DAC1 channel 1 is included.
* @note The default is @p FALSE.
*/
#if !defined(STM32_DAC_USE_DAC1_CH1) || defined(__DOXYGEN__)
#define STM32_DAC_USE_DAC1_CH1 FALSE
#endif
/**
* @brief DAC1 CH2 driver enable switch.
* @details If set to @p TRUE the support for DAC1 channel 2 is included.
* @note The default is @p FALSE.
*/
#if !defined(STM32_DAC_USE_DAC1_CH2) || defined(__DOXYGEN__)
#define STM32_DAC_USE_DAC1_CH2 FALSE
#endif
/**
* @brief DAC2 CH1 driver enable switch.
* @details If set to @p TRUE the support for DAC2 channel 1 is included.
* @note The default is @p FALSE.
*/
#if !defined(STM32_DAC_USE_DAC2_CH1) || defined(__DOXYGEN__)
#define STM32_DAC_USE_DAC2_CH1 FALSE
#endif
/**
* @brief DAC2 CH2 driver enable switch.
* @details If set to @p TRUE the support for DAC2 channel 2 is included.
* @note The default is @p FALSE.
*/
#if !defined(STM32_DAC_USE_DAC2_CH2) || defined(__DOXYGEN__)
#define STM32_DAC_USE_DAC2_CH2 FALSE
#endif
/**
* @brief DAC1 CH1 interrupt priority level setting.
*/
#if !defined(STM32_DAC1_CH1_IRQ_PRIORITY) || defined(__DOXYGEN__)
#define STM32_DAC1_CH1_IRQ_PRIORITY 10
#endif
/**
* @brief DAC1 CH2 interrupt priority level setting.
*/
#if !defined(STM32_DAC1_CH2_IRQ_PRIORITY) || defined(__DOXYGEN__)
#define STM32_DAC1_CH2_IRQ_PRIORITY 10
#endif
/**
* @brief DAC2 CH1 interrupt priority level setting.
*/
#if !defined(STM32_DAC2_CH1_IRQ_PRIORITY) || defined(__DOXYGEN__)
#define STM32_DAC2_CH1_IRQ_PRIORITY 10
#endif
/**
* @brief DAC2 CH2 interrupt priority level setting.
*/
#if !defined(STM32_DAC2_CH2_IRQ_PRIORITY) || defined(__DOXYGEN__)
#define STM32_DAC2_CH2_IRQ_PRIORITY 10
#endif
/**
* @brief DAC1 CH1 DMA priority (0..3|lowest..highest).
*/
#if !defined(STM32_DAC1_CH1_DMA_PRIORITY) || defined(__DOXYGEN__)
#define STM32_DAC1_CH1_DMA_PRIORITY 2
#endif
/**
* @brief DAC1 CH2 DMA priority (0..3|lowest..highest).
*/
#if !defined(STM32_DAC1_CH2_DMA_PRIORITY) || defined(__DOXYGEN__)
#define STM32_DAC1_CH2_DMA_PRIORITY 2
#endif
/**
* @brief DAC2 CH1 DMA priority (0..3|lowest..highest).
*/
#if !defined(STM32_DAC2_CH1_DMA_PRIORITY) || defined(__DOXYGEN__)
#define STM32_DAC2_CH1_DMA_PRIORITY 2
#endif
/**
* @brief DAC2 CH2 DMA priority (0..3|lowest..highest).
*/
#if !defined(STM32_DAC2_CH2_DMA_PRIORITY) || defined(__DOXYGEN__)
#define STM32_DAC2_CH2_DMA_PRIORITY 2
#endif
/*===========================================================================*/
/* Derived constants and error checks. */
/*===========================================================================*/
#if STM32_DAC_USE_DAC1_CH1 && !STM32_HAS_DAC1_CH1
#error "DAC1 CH1 not present in the selected device"
#endif
#if STM32_DAC_USE_DAC1_CH2 && !STM32_HAS_DAC1_CH2
#error "DAC1 CH2 not present in the selected device"
#endif
#if STM32_DAC_USE_DAC2_CH1 && !STM32_HAS_DAC2_CH1
#error "DAC2 CH1 not present in the selected device"
#endif
#if STM32_DAC_USE_DAC2_CH2 && !STM32_HAS_DAC2_CH2
#error "DAC2 CH2 not present in the selected device"
#endif
#if (STM32_DAC_USE_DAC1_CH2 || STM32_DAC_USE_DAC2_CH2) && STM32_DAC_DUAL_MODE
#error "DACx CH2 cannot be used independently in dual mode"
#endif
#if !STM32_DAC_USE_DAC1_CH1 && !STM32_DAC_USE_DAC1_CH2 && \
!STM32_DAC_USE_DAC2_CH1 && !STM32_DAC_USE_DAC2_CH2
#error "DAC driver activated but no DAC peripheral assigned"
#endif
/* The following checks are only required when there is a DMA able to
reassign streams to different channels.*/
#if STM32_ADVANCED_DMA
/* Check on the presence of the DMA streams settings in mcuconf.h.*/
#if STM32_DAC_USE_DAC1_CH1 && !defined(STM32_DAC1_CH1_DMA_STREAM)
#error "DAC1 CH1 DMA stream not defined"
#endif
#if STM32_DAC_USE_DAC1_CH2 && !defined(STM32_DAC1_CH2_DMA_STREAM)
#error "DAC1 CH2 DMA stream not defined"
#endif
#if STM32_DAC_USE_DAC2_CH1 && !defined(STM32_DAC2_CH1_DMA_STREAM)
#error "DAC2 CH1 DMA stream not defined"
#endif
#if STM32_DAC_USE_DAC2_CH2 && !defined(STM32_DAC2_CH2_DMA_STREAM)
#error "DAC2 CH2 DMA stream not defined"
#endif
/* Check on the validity of the assigned DMA channels.*/
#if STM32_DAC_USE_DAC1_CH1 && \
!STM32_DMA_IS_VALID_ID(STM32_DAC1_CH1_DMA_STREAM, STM32_DAC1_CH1_DMA_MSK)
#error "invalid DMA stream associated to DAC1 CH1"
#endif
#if STM32_DAC_USE_DAC1_CH2 && \
!STM32_DMA_IS_VALID_ID(STM32_DAC1_CH2_DMA_STREAM, STM32_DAC1_CH2_DMA_MSK)
#error "invalid DMA stream associated to DAC1 CH2"
#endif
#if STM32_DAC_USE_DAC2_CH1 && \
!STM32_DMA_IS_VALID_ID(STM32_DAC2_CH1_DMA_STREAM, STM32_DAC2_CH1_DMA_MSK)
#error "invalid DMA stream associated to DAC2 CH1"
#endif
#if STM32_DAC_USE_DAC2_CH2 && \
!STM32_DMA_IS_VALID_ID(STM32_DAC2_CH2_DMA_STREAM, STM32_DAC2_CH2_DMA_MSK)
#error "invalid DMA stream associated to DAC2 CH2"
#endif
#endif /* STM32_ADVANCED_DMA */
#if !defined(STM32_DMA_REQUIRED)
#define STM32_DMA_REQUIRED
#endif
/**
* @brief Max DAC channels.
*/
#if STM32_DAC_DUAL_MODE == FALSE
#define DAC_MAX_CHANNELS 1
#else
#define DAC_MAX_CHANNELS 2
#endif
/*===========================================================================*/
/* Driver data structures and types. */
/*===========================================================================*/
/**
* @brief Type of a DAC channel index.
*/
typedef uint32_t dacchannel_t;
/**
* @brief DAC channel parameters type.
*/
typedef struct {
/**
* @brief Pointer to the DAC registers block.
*/
DAC_TypeDef *dac;
/**
* @brief DAC data registers offset.
*/
uint32_t dataoffset;
/**
* @brief DAC CR register bit offset.
*/
uint32_t regshift;
/**
* @brief DAC CR register mask.
*/
uint32_t regmask;
/**
* @brief Associated DMA.
*/
const stm32_dma_stream_t *dma;
/**
* @brief Mode bits for the DMA.
*/
uint32_t dmamode;
/**
* @brief DMA channel IRQ priority.
*/
uint32_t dmairqprio;
} dacparams_t;
/**
* @brief Type of a structure representing an DAC driver.
*/
typedef struct DACDriver DACDriver;
/**
* @brief Type representing a DAC sample.
*/
typedef uint16_t dacsample_t;
/**
* @brief Possible DAC failure causes.
* @note Error codes are architecture dependent and should not relied
* upon.
*/
typedef enum {
DAC_ERR_DMAFAILURE = 0, /**< DMA operations failure. */
DAC_ERR_UNDERFLOW = 1 /**< DAC overflow condition. */
} dacerror_t;
/**
* @brief DAC notification callback type.
*
* @param[in] dacp pointer to the @p DACDriver object triggering the
* @param[in] buffer pointer to the next semi-buffer to be filled
* @param[in] n number of buffer rows available starting from @p buffer
* callback
*/
typedef void (*daccallback_t)(DACDriver *dacp,
const dacsample_t *buffer,
size_t n);
/**
* @brief ADC error callback type.
*
* @param[in] dacp pointer to the @p DACDriver object triggering the
* callback
* @param[in] err ADC error code
*/
typedef void (*dacerrorcallback_t)(DACDriver *dacp, dacerror_t err);
/**
* @brief Samples alignment and size mode.
*/
typedef enum {
DAC_DHRM_12BIT_RIGHT = 0,
DAC_DHRM_12BIT_LEFT = 1,
DAC_DHRM_8BIT_RIGHT = 2,
#if STM32_DAC_DUAL_MODE && !defined(__DOXYGEN__)
DAC_DHRM_12BIT_RIGHT_DUAL = 3,
DAC_DHRM_12BIT_LEFT_DUAL = 4,
DAC_DHRM_8BIT_RIGHT_DUAL = 5
#endif
} dacdhrmode_t;
/**
* @brief DAC Conversion group structure.
*/
typedef struct {
/**
* @brief Number of DAC channels.
*/
uint32_t num_channels;
/**
* @brief Operation complete callback or @p NULL.
*/
daccallback_t end_cb;
/**
* @brief Error handling callback or @p NULL.
*/
dacerrorcallback_t error_cb;
/* End of the mandatory fields.*/
/**
* @brief DAC initialization data.
* @note This field contains the (not shifted) value to be put into the
* TSEL field of the DAC CR register during initialization. All
* other fields are handled internally.
*/
uint32_t trigger;
} DACConversionGroup;
/**
* @brief Driver configuration structure.
*/
typedef struct {
/* End of the mandatory fields.*/
/**
* @brief DAC data holding register mode.
*/
dacdhrmode_t datamode;
} DACConfig;
/**
* @brief Structure representing a DAC driver.
*/
struct DACDriver {
/**
* @brief Driver state.
*/
dacstate_t state;
/**
* @brief Conversion group.
*/
const DACConversionGroup *grpp;
/**
* @brief Samples buffer pointer.
*/
const dacsample_t *samples;
/**
* @brief Samples buffer size.
*/
uint16_t depth;
/**
* @brief Current configuration data.
*/
const DACConfig *config;
#if DAC_USE_WAIT || defined(__DOXYGEN__)
/**
* @brief Waiting thread.
*/
thread_reference_t thread;
#endif /* DAC_USE_WAIT */
#if DAC_USE_MUTUAL_EXCLUSION || defined(__DOXYGEN__)
/**
* @brief Mutex protecting the bus.
*/
mutex_t mutex;
#endif /* DAC_USE_MUTUAL_EXCLUSION */
#if defined(DAC_DRIVER_EXT_FIELDS)
DAC_DRIVER_EXT_FIELDS
#endif
/* End of the mandatory fields.*/
/**
* @brief DAC channel parameters.
*/
const dacparams_t *params;
};
/*===========================================================================*/
/* Driver macros. */
/*===========================================================================*/
/*===========================================================================*/
/* External declarations. */
/*===========================================================================*/
#if STM32_DAC_USE_DAC1_CH1 && !defined(__DOXYGEN__)
extern DACDriver DACD1;
#endif
#if STM32_DAC_USE_DAC1_CH2 && !STM32_DAC_DUAL_MODE && !defined(__DOXYGEN__)
extern DACDriver DACD2;
#endif
#if STM32_DAC_USE_DAC2_CH1 && !defined(__DOXYGEN__)
extern DACDriver DACD3;
#endif
#if STM32_DAC_USE_DAC2_CH2 && !STM32_DAC_DUAL_MODE && !defined(__DOXYGEN__)
extern DACDriver DACD4;
#endif
#ifdef __cplusplus
extern "C" {
#endif
void dac_lld_init(void);
void dac_lld_start(DACDriver *dacp);
void dac_lld_stop(DACDriver *dacp);
void dac_lld_put_channel(DACDriver *dacp,
dacchannel_t channel,
dacsample_t sample);
void dac_lld_start_conversion(DACDriver *dacp);
void dac_lld_stop_conversion(DACDriver *dacp);
#ifdef __cplusplus
}
#endif
#endif /* HAL_USE_DAC */
#endif /* _DAC_LLD_H_ */
/** @} */
Reference in New Issue View Git Blame Copy Permalink