165 lines
5.5 KiB
C
165 lines
5.5 KiB
C
/*
|
|
ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
|
|
2011 Giovanni Di Sirio.
|
|
|
|
This file is part of ChibiOS/RT.
|
|
|
|
ChibiOS/RT is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
ChibiOS/RT is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
/**
|
|
* @file STM32F2xx/hal_lld.c
|
|
* @brief STM32F2xx HAL subsystem low level driver source.
|
|
*
|
|
* @addtogroup HAL
|
|
* @{
|
|
*/
|
|
|
|
#include "ch.h"
|
|
#include "hal.h"
|
|
|
|
#define AIRCR_VECTKEY 0x05FA0000
|
|
|
|
/*===========================================================================*/
|
|
/* Driver exported variables. */
|
|
/*===========================================================================*/
|
|
|
|
/*===========================================================================*/
|
|
/* Driver local variables. */
|
|
/*===========================================================================*/
|
|
|
|
/*===========================================================================*/
|
|
/* Driver local functions. */
|
|
/*===========================================================================*/
|
|
|
|
/*===========================================================================*/
|
|
/* Driver interrupt handlers. */
|
|
/*===========================================================================*/
|
|
|
|
/*===========================================================================*/
|
|
/* Driver exported functions. */
|
|
/*===========================================================================*/
|
|
|
|
/**
|
|
* @brief Low level HAL driver initialization.
|
|
*
|
|
* @notapi
|
|
*/
|
|
void hal_lld_init(void) {
|
|
|
|
/* Reset of all peripherals.*/
|
|
// RCC->APB1RSTR = 0xFFFFFFFF;
|
|
// RCC->APB2RSTR = 0xFFFFFFFF;
|
|
// RCC->APB1RSTR = 0;
|
|
// RCC->APB2RSTR = 0;
|
|
|
|
/* SysTick initialization using the system clock.*/
|
|
SysTick->LOAD = STM32_HCLK / CH_FREQUENCY - 1;
|
|
SysTick->VAL = 0;
|
|
SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
|
|
SysTick_CTRL_ENABLE_Msk |
|
|
SysTick_CTRL_TICKINT_Msk;
|
|
|
|
|
|
|
|
#if defined(STM32_DMA_REQUIRED)
|
|
dmaInit();
|
|
#endif
|
|
}
|
|
|
|
/**
|
|
* @brief STM32F2xx clocks and PLL initialization.
|
|
* @note All the involved constants come from the file @p board.h.
|
|
* @note This function should be invoked just after the system reset.
|
|
*
|
|
* @special
|
|
*/
|
|
#if defined(STM32F2XX) || defined(__DOXYGEN__)
|
|
/**
|
|
* @brief Clocks and internal voltage initialization.
|
|
*/
|
|
void stm32_clock_init(void) {
|
|
|
|
#if !STM32_NO_INIT
|
|
/* PWR clock enable.*/
|
|
RCC->APB1ENR = RCC_APB1ENR_PWREN;
|
|
|
|
/* Initial clocks setup and wait for HSI stabilization, the MSI clock is
|
|
always enabled because it is the fallback clock when PLL the fails.*/
|
|
RCC->CR |= RCC_CR_HSION;
|
|
while ((RCC->CR & RCC_CR_HSIRDY) == 0)
|
|
; /* Waits until HSI is stable. */
|
|
|
|
#if STM32_HSE_ENABLED
|
|
/* HSE activation.*/
|
|
RCC->CR |= RCC_CR_HSEON;
|
|
while ((RCC->CR & RCC_CR_HSERDY) == 0)
|
|
; /* Waits until HSE is stable. */
|
|
#endif
|
|
|
|
#if STM32_LSI_ENABLED
|
|
/* LSI activation.*/
|
|
RCC->CSR |= RCC_CSR_LSION;
|
|
while ((RCC->CSR & RCC_CSR_LSIRDY) == 0)
|
|
; /* Waits until LSI is stable. */
|
|
#endif
|
|
|
|
#if STM32_LSE_ENABLED
|
|
/* LSE activation, have to unlock the register.*/
|
|
if ((RCC->BDCR & RCC_BDCR_LSEON) == 0) {
|
|
PWR->CR |= PWR_CR_DBP;
|
|
RCC->BDCR |= RCC_BDCR_LSEON;
|
|
PWR->CR &= ~PWR_CR_DBP;
|
|
}
|
|
while ((RCC->BDCR & RCC_BDCR_LSERDY) == 0)
|
|
; /* Waits until LSE is stable. */
|
|
#endif
|
|
|
|
#if STM32_ACTIVATE_PLL
|
|
/* PLL activation.*/
|
|
RCC->PLLCFGR = STM32_PLLQ | STM32_PLLSRC | STM32_PLLP | STM32_PLLN | STM32_PLLM;
|
|
RCC->CR |= RCC_CR_PLLON;
|
|
while (!(RCC->CR & RCC_CR_PLLRDY))
|
|
; /* Waits until PLL is stable. */
|
|
#endif
|
|
|
|
#if STM32_ACTIVATE_PLLI2S
|
|
/* PLLI2S activation.*/
|
|
RCC->PLLI2SCFGR = STM32_PLI2SR_VALUE | STM32_PLLI2SN_VALUE;
|
|
RCC->CR |= RCC_CR_PLLI2SON;
|
|
while (!(RCC->CR & RCC_CR_PLLI2SRDY))
|
|
; /* Waits until PLLI2S is stable. */
|
|
#endif
|
|
|
|
/* Other clock-related settings (dividers, MCO etc).*/
|
|
RCC->CFGR |= STM32_MCO2PRE | STM32_MCO2SEL | STM32_MCO1PRE | STM32_MCO1SEL |
|
|
STM32_RTCPRE | STM32_PPRE2 | STM32_PPRE1 | STM32_HPRE;
|
|
|
|
/* Flash setup. */
|
|
FLASH->ACR = FLASH_ACR_PRFTEN | FLASH_ACR_ICEN | FLASH_ACR_DCEN | STM32_FLASHBITS;
|
|
|
|
/* Switching to the configured clock source if it is different from MSI. */
|
|
#if (STM32_SW != STM32_SW_HSI)
|
|
RCC->CFGR |= STM32_SW; /* Switches on the selected clock source. */
|
|
while ((RCC->CFGR & RCC_CFGR_SWS) != (STM32_SW << 2))
|
|
;
|
|
#endif
|
|
#endif /* STM32_NO_INIT */
|
|
}
|
|
#else
|
|
void stm32_clock_init(void) {}
|
|
#endif
|
|
|
|
/** @} */
|