337 lines
9.1 KiB
C
337 lines
9.1 KiB
C
/*
|
|
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
|
|
|
|
Licensed under the Apache License, Version 2.0 (the "License");
|
|
you may not use this file except in compliance with the License.
|
|
You may obtain a copy of the License at
|
|
|
|
http://www.apache.org/licenses/LICENSE-2.0
|
|
|
|
Unless required by applicable law or agreed to in writing, software
|
|
distributed under the License is distributed on an "AS IS" BASIS,
|
|
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
See the License for the specific language governing permissions and
|
|
limitations under the License.
|
|
*/
|
|
|
|
/**
|
|
* @file AVR/pal_lld.h
|
|
* @brief AVR GPIO low level driver header.
|
|
*
|
|
* @addtogroup PAL
|
|
* @{
|
|
*/
|
|
|
|
#ifndef _PAL_LLD_H_
|
|
#define _PAL_LLD_H_
|
|
|
|
#include "avr_pins.h"
|
|
|
|
#if HAL_USE_PAL || defined(__DOXYGEN__)
|
|
|
|
/*===========================================================================*/
|
|
/* Unsupported modes and specific modes */
|
|
/*===========================================================================*/
|
|
|
|
#undef PAL_MODE_INPUT_PULLDOWN
|
|
#undef PAL_MODE_OUTPUT_OPENDRAIN
|
|
|
|
/*===========================================================================*/
|
|
/* I/O Ports Types and constants. */
|
|
/*===========================================================================*/
|
|
|
|
/**
|
|
* @brief Width, in bits, of an I/O port.
|
|
*/
|
|
#define PAL_IOPORTS_WIDTH 8
|
|
|
|
/**
|
|
* @brief Whole port mask.
|
|
* @details This macro specifies all the valid bits into a port.
|
|
*/
|
|
#define PAL_WHOLE_PORT ((ioportmask_t)0xFF)
|
|
|
|
/**
|
|
* @brief AVR setup registers.
|
|
*/
|
|
typedef struct {
|
|
uint8_t out;
|
|
uint8_t dir;
|
|
} avr_gpio_setup_t;
|
|
|
|
/**
|
|
* @brief AVR registers block.
|
|
* @note On some devices registers do not follow this layout on some
|
|
* ports, the ports with abnormal layout cannot be used through
|
|
* PAL driver. Example: PORT F on Mega128.
|
|
*/
|
|
typedef struct {
|
|
volatile uint8_t in;
|
|
volatile uint8_t dir;
|
|
volatile uint8_t out;
|
|
} avr_gpio_registers_t;
|
|
|
|
/**
|
|
* @brief Generic I/O ports static initializer.
|
|
* @details An instance of this structure must be passed to @p palInit() at
|
|
* system startup time in order to initialized the digital I/O
|
|
* subsystem. This represents only the initial setup, specific pads
|
|
* or whole ports can be reprogrammed at later time.
|
|
*/
|
|
typedef struct {
|
|
#if defined(PORTA) || defined(__DOXYGEN__)
|
|
avr_gpio_setup_t porta;
|
|
#endif
|
|
#if defined(PORTB) || defined(__DOXYGEN__)
|
|
avr_gpio_setup_t portb;
|
|
#endif
|
|
#if defined(PORTC) || defined(__DOXYGEN__)
|
|
avr_gpio_setup_t portc;
|
|
#endif
|
|
#if defined(PORTD) || defined(__DOXYGEN__)
|
|
avr_gpio_setup_t portd;
|
|
#endif
|
|
#if defined(PORTE) || defined(__DOXYGEN__)
|
|
avr_gpio_setup_t porte;
|
|
#endif
|
|
#if defined(PORTF) || defined(__DOXYGEN__)
|
|
avr_gpio_setup_t portf;
|
|
#endif
|
|
#if defined(PORTG) || defined(__DOXYGEN__)
|
|
avr_gpio_setup_t portg;
|
|
#endif
|
|
#if defined(PORTH) || defined(__DOXYGEN__)
|
|
avr_gpio_setup_t porth;
|
|
#endif
|
|
#if defined(PORTJ) || defined(__DOXYGEN__)
|
|
avr_gpio_setup_t portj;
|
|
#endif
|
|
#if defined(PORTK) || defined(__DOXYGEN__)
|
|
avr_gpio_setup_t portk;
|
|
#endif
|
|
#if defined(PORTL) || defined(__DOXYGEN__)
|
|
avr_gpio_setup_t portl;
|
|
#endif
|
|
} PALConfig;
|
|
|
|
/**
|
|
* @brief Digital I/O port sized unsigned type.
|
|
*/
|
|
typedef uint8_t ioportmask_t;
|
|
|
|
/**
|
|
* @brief Digital I/O modes.
|
|
*/
|
|
typedef uint8_t iomode_t;
|
|
|
|
/**
|
|
* @brief Port Identifier.
|
|
* @details This type can be a scalar or some kind of pointer, do not make
|
|
* any assumption about it, use the provided macros when populating
|
|
* variables of this type.
|
|
*/
|
|
typedef volatile avr_gpio_registers_t * ioportid_t;
|
|
|
|
/*===========================================================================*/
|
|
/* I/O Ports Identifiers. */
|
|
/*===========================================================================*/
|
|
|
|
#if defined(PORTA) || defined(__DOXYGEN__)
|
|
/**
|
|
* @brief GPIO port A identifier.
|
|
*/
|
|
#define IOPORT1 ((volatile avr_gpio_registers_t *)&PINA)
|
|
#endif
|
|
|
|
#if defined(PORTB) || defined(__DOXYGEN__)
|
|
/**
|
|
* @brief GPIO port B identifier.
|
|
*/
|
|
#define IOPORT2 ((volatile avr_gpio_registers_t *)&PINB)
|
|
#endif
|
|
|
|
#if defined(PORTC) || defined(__DOXYGEN__)
|
|
/**
|
|
* @brief GPIO port C identifier.
|
|
*/
|
|
#define IOPORT3 ((volatile avr_gpio_registers_t *)&PINC)
|
|
#endif
|
|
|
|
#if defined(PORTD) || defined(__DOXYGEN__)
|
|
/**
|
|
* @brief GPIO port D identifier.
|
|
*/
|
|
#define IOPORT4 ((volatile avr_gpio_registers_t *)&PIND)
|
|
#endif
|
|
|
|
#if defined(PORTE) || defined(__DOXYGEN__)
|
|
/**
|
|
* @brief GPIO port E identifier.
|
|
*/
|
|
#define IOPORT5 ((volatile avr_gpio_registers_t *)&PINE)
|
|
#endif
|
|
|
|
#if defined(PORTF) || defined(__DOXYGEN__)
|
|
/**
|
|
* @brief GPIO port F identifier.
|
|
*/
|
|
#define IOPORT6 ((volatile avr_gpio_registers_t *)&PINF)
|
|
#endif
|
|
|
|
#if defined(PORTG) || defined(__DOXYGEN__)
|
|
/**
|
|
* @brief GPIO port G identifier.
|
|
*/
|
|
#define IOPORT7 ((volatile avr_gpio_registers_t *)&PING)
|
|
#endif
|
|
|
|
#if defined(PORTH) || defined(__DOXYGEN__)
|
|
/**
|
|
* @brief GPIO port H identifier.
|
|
*/
|
|
#define IOPORT8 ((volatile avr_gpio_registers_t *)&PINH)
|
|
#endif
|
|
|
|
#if defined(PORTJ) || defined(__DOXYGEN__)
|
|
/**
|
|
* @brief GPIO port J identifier.
|
|
*/
|
|
#define IOPORT9 ((volatile avr_gpio_registers_t *)&PINJ)
|
|
#endif
|
|
|
|
#if defined(PORTK) || defined(__DOXYGEN__)
|
|
/**
|
|
* @brief GPIO port K identifier.
|
|
*/
|
|
#define IOPORT10 ((volatile avr_gpio_registers_t *)&PINK)
|
|
#endif
|
|
|
|
#if defined(PORTL) || defined(__DOXYGEN__)
|
|
/**
|
|
* @brief GPIO port L identifier.
|
|
*/
|
|
#define IOPORT11 ((volatile avr_gpio_registers_t *)&PINL)
|
|
#endif
|
|
|
|
#if defined(PORTADC) || defined(__DOXYGEN__)
|
|
/**
|
|
* @brief GPIO port ADC identifier.
|
|
*/
|
|
#define IOPORTADC ((volatile avr_gpio_registers_t *)&PINADC)
|
|
#endif
|
|
|
|
#if defined(PORT_SPI1) || defined(__DOXYGEN__)
|
|
/**
|
|
* @brief GPIO port SPI1 identifier.
|
|
*/
|
|
#define IOPORTSPI1 ((volatile avr_gpio_registers_t *)&PIN_SPI1)
|
|
#endif
|
|
|
|
|
|
/*===========================================================================*/
|
|
/* Implementation, some of the following macros could be implemented as */
|
|
/* functions, if so please put them in pal_lld.c. */
|
|
/*===========================================================================*/
|
|
|
|
/**
|
|
* @brief Low level PAL subsystem initialization.
|
|
*
|
|
* @param[in] config the architecture-dependent ports configuration
|
|
*
|
|
* @notapi
|
|
*/
|
|
#define pal_lld_init(config) _pal_lld_init(config)
|
|
|
|
/**
|
|
* @brief Reads the physical I/O port states.
|
|
*
|
|
* @param[in] port port identifier
|
|
* @return The port bits.
|
|
*
|
|
* @notapi
|
|
*/
|
|
#define pal_lld_readport(port) ((port)->in)
|
|
|
|
/**
|
|
* @brief Reads the output latch.
|
|
* @details The purpose of this function is to read back the latched output
|
|
* value.
|
|
*
|
|
* @param[in] port port identifier
|
|
* @return The latched logical states.
|
|
*
|
|
* @notapi
|
|
*/
|
|
#define pal_lld_readlatch(port) ((port)->out)
|
|
|
|
/**
|
|
* @brief Writes a bits mask on a I/O port.
|
|
*
|
|
* @param[in] port port identifier
|
|
* @param[in] bits bits to be written on the specified port
|
|
*
|
|
* @notapi
|
|
*/
|
|
#define pal_lld_writeport(port, bits) ((port)->out = bits)
|
|
|
|
/**
|
|
* @brief Pads group mode setup.
|
|
* @details This function programs a pads group belonging to the same port
|
|
* with the specified mode.
|
|
* @note Programming an unknown or unsupported mode is silently ignored.
|
|
*
|
|
* @param[in] port port identifier
|
|
* @param[in] mask group mask
|
|
* @param[in] offset group bit offset within the port
|
|
* @param[in] mode group mode
|
|
*
|
|
* @notapi
|
|
*/
|
|
#define pal_lld_setgroupmode(port, mask, offset, mode) \
|
|
_pal_lld_setgroupmode(port, mask << offset, mode)
|
|
|
|
/**
|
|
* @brief Sets a pad logical state to @p PAL_HIGH.
|
|
*
|
|
* @param[in] port port identifier
|
|
* @param[in] pad pad number within the port
|
|
*
|
|
* @notapi
|
|
*/
|
|
#define pal_lld_setpad(port, pad) \
|
|
__asm__ __volatile__( \
|
|
"sbi %0,%1\n\t" :: "I" (_SFR_IO_ADDR(port->out)), "I" (pad) \
|
|
)
|
|
|
|
/**
|
|
* @brief Clears a pad logical state to @p PAL_LOW.
|
|
*
|
|
* @param[in] port port identifier
|
|
* @param[in] pad pad number within the port
|
|
*
|
|
* @notapi
|
|
*/
|
|
#define pal_lld_clearpad(port, pad) \
|
|
__asm__ __volatile__( \
|
|
"cbi %0,%1\n\t" :: "I" (_SFR_IO_ADDR(port->out)), "I" (pad) \
|
|
)
|
|
|
|
extern ROMCONST PALConfig pal_default_config;
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
void _pal_lld_init(const PALConfig *config);
|
|
void _pal_lld_setgroupmode(ioportid_t port,
|
|
ioportmask_t mask,
|
|
iomode_t mode);
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif /* HAL_USE_PAL */
|
|
|
|
#endif /* _PAL_LLD_H_ */
|
|
|
|
/** @} */
|