zcy
/
tinySA
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
tinySA/os/hal/platforms/STM32/SPIv1/spi_lld.c

484 lines
17 KiB
C
Raw Blame History

/*
ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/**
* @file STM32/SPIv1/spi_lld.c
* @brief STM32 SPI subsystem low level driver source.
*
* @addtogroup SPI
* @{
*/
#include "ch.h"
#include "hal.h"
#if HAL_USE_SPI || defined(__DOXYGEN__)
/*===========================================================================*/
/* Driver local definitions. */
/*===========================================================================*/
#define SPI1_RX_DMA_CHANNEL \
STM32_DMA_GETCHANNEL(STM32_SPI_SPI1_RX_DMA_STREAM, \
STM32_SPI1_RX_DMA_CHN)
#define SPI1_TX_DMA_CHANNEL \
STM32_DMA_GETCHANNEL(STM32_SPI_SPI1_TX_DMA_STREAM, \
STM32_SPI1_TX_DMA_CHN)
#define SPI2_RX_DMA_CHANNEL \
STM32_DMA_GETCHANNEL(STM32_SPI_SPI2_RX_DMA_STREAM, \
STM32_SPI2_RX_DMA_CHN)
#define SPI2_TX_DMA_CHANNEL \
STM32_DMA_GETCHANNEL(STM32_SPI_SPI2_TX_DMA_STREAM, \
STM32_SPI2_TX_DMA_CHN)
#define SPI3_RX_DMA_CHANNEL \
STM32_DMA_GETCHANNEL(STM32_SPI_SPI3_RX_DMA_STREAM, \
STM32_SPI3_RX_DMA_CHN)
#define SPI3_TX_DMA_CHANNEL \
STM32_DMA_GETCHANNEL(STM32_SPI_SPI3_TX_DMA_STREAM, \
STM32_SPI3_TX_DMA_CHN)
/*===========================================================================*/
/* Driver exported variables. */
/*===========================================================================*/
/** @brief SPI1 driver identifier.*/
#if STM32_SPI_USE_SPI1 || defined(__DOXYGEN__)
SPIDriver SPID1;
#endif
/** @brief SPI2 driver identifier.*/
#if STM32_SPI_USE_SPI2 || defined(__DOXYGEN__)
SPIDriver SPID2;
#endif
/** @brief SPI3 driver identifier.*/
#if STM32_SPI_USE_SPI3 || defined(__DOXYGEN__)
SPIDriver SPID3;
#endif
/*===========================================================================*/
/* Driver local variables and types. */
/*===========================================================================*/
static uint16_t dummytx;
static uint16_t dummyrx;
/*===========================================================================*/
/* Driver local functions. */
/*===========================================================================*/
/**
* @brief Shared end-of-rx service routine.
*
* @param[in] spip pointer to the @p SPIDriver object
* @param[in] flags pre-shifted content of the ISR register
*/
static void spi_lld_serve_rx_interrupt(SPIDriver *spip, uint32_t flags) {
/* DMA errors handling.*/
#if defined(STM32_SPI_DMA_ERROR_HOOK)
if ((flags & (STM32_DMA_ISR_TEIF | STM32_DMA_ISR_DMEIF)) != 0) {
STM32_SPI_DMA_ERROR_HOOK(spip);
}
#else
(void)flags;
#endif
/* Stop everything.*/
dmaStreamDisable(spip->dmatx);
dmaStreamDisable(spip->dmarx);
/* Portable SPI ISR code defined in the high level driver, note, it is
a macro.*/
_spi_isr_code(spip);
}
/**
* @brief Shared end-of-tx service routine.
*
* @param[in] spip pointer to the @p SPIDriver object
* @param[in] flags pre-shifted content of the ISR register
*/
static void spi_lld_serve_tx_interrupt(SPIDriver *spip, uint32_t flags) {
/* DMA errors handling.*/
#if defined(STM32_SPI_DMA_ERROR_HOOK)
(void)spip;
if ((flags & (STM32_DMA_ISR_TEIF | STM32_DMA_ISR_DMEIF)) != 0) {
STM32_SPI_DMA_ERROR_HOOK(spip);
}
#else
(void)spip;
(void)flags;
#endif
}
/*===========================================================================*/
/* Driver interrupt handlers. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver exported functions. */
/*===========================================================================*/
/**
* @brief Low level SPI driver initialization.
*
* @notapi
*/
void spi_lld_init(void) {
dummytx = 0xFFFF;
#if STM32_SPI_USE_SPI1
spiObjectInit(&SPID1);
SPID1.spi = SPI1;
SPID1.dmarx = STM32_DMA_STREAM(STM32_SPI_SPI1_RX_DMA_STREAM);
SPID1.dmatx = STM32_DMA_STREAM(STM32_SPI_SPI1_TX_DMA_STREAM);
SPID1.rxdmamode = STM32_DMA_CR_CHSEL(SPI1_RX_DMA_CHANNEL) |
STM32_DMA_CR_PL(STM32_SPI_SPI1_DMA_PRIORITY) |
STM32_DMA_CR_DIR_P2M |
STM32_DMA_CR_TCIE |
STM32_DMA_CR_DMEIE |
STM32_DMA_CR_TEIE;
SPID1.txdmamode = STM32_DMA_CR_CHSEL(SPI1_TX_DMA_CHANNEL) |
STM32_DMA_CR_PL(STM32_SPI_SPI1_DMA_PRIORITY) |
STM32_DMA_CR_DIR_M2P |
STM32_DMA_CR_DMEIE |
STM32_DMA_CR_TEIE;
#endif
#if STM32_SPI_USE_SPI2
spiObjectInit(&SPID2);
SPID2.spi = SPI2;
SPID2.dmarx = STM32_DMA_STREAM(STM32_SPI_SPI2_RX_DMA_STREAM);
SPID2.dmatx = STM32_DMA_STREAM(STM32_SPI_SPI2_TX_DMA_STREAM);
SPID2.rxdmamode = STM32_DMA_CR_CHSEL(SPI2_RX_DMA_CHANNEL) |
STM32_DMA_CR_PL(STM32_SPI_SPI2_DMA_PRIORITY) |
STM32_DMA_CR_DIR_P2M |
STM32_DMA_CR_TCIE |
STM32_DMA_CR_DMEIE |
STM32_DMA_CR_TEIE;
SPID2.txdmamode = STM32_DMA_CR_CHSEL(SPI2_TX_DMA_CHANNEL) |
STM32_DMA_CR_PL(STM32_SPI_SPI2_DMA_PRIORITY) |
STM32_DMA_CR_DIR_M2P |
STM32_DMA_CR_DMEIE |
STM32_DMA_CR_TEIE;
#endif
#if STM32_SPI_USE_SPI3
spiObjectInit(&SPID3);
SPID3.spi = SPI3;
SPID3.dmarx = STM32_DMA_STREAM(STM32_SPI_SPI3_RX_DMA_STREAM);
SPID3.dmatx = STM32_DMA_STREAM(STM32_SPI_SPI3_TX_DMA_STREAM);
SPID3.rxdmamode = STM32_DMA_CR_CHSEL(SPI3_RX_DMA_CHANNEL) |
STM32_DMA_CR_PL(STM32_SPI_SPI3_DMA_PRIORITY) |
STM32_DMA_CR_DIR_P2M |
STM32_DMA_CR_TCIE |
STM32_DMA_CR_DMEIE |
STM32_DMA_CR_TEIE;
SPID3.txdmamode = STM32_DMA_CR_CHSEL(SPI3_TX_DMA_CHANNEL) |
STM32_DMA_CR_PL(STM32_SPI_SPI3_DMA_PRIORITY) |
STM32_DMA_CR_DIR_M2P |
STM32_DMA_CR_DMEIE |
STM32_DMA_CR_TEIE;
#endif
}
/**
* @brief Configures and activates the SPI peripheral.
*
* @param[in] spip pointer to the @p SPIDriver object
*
* @notapi
*/
void spi_lld_start(SPIDriver *spip) {
/* If in stopped state then enables the SPI and DMA clocks.*/
if (spip->state == SPI_STOP) {
#if STM32_SPI_USE_SPI1
if (&SPID1 == spip) {
bool_t b;
b = dmaStreamAllocate(spip->dmarx,
STM32_SPI_SPI1_IRQ_PRIORITY,
(stm32_dmaisr_t)spi_lld_serve_rx_interrupt,
(void *)spip);
chDbgAssert(!b, "spi_lld_start(), #1", "stream already allocated");
b = dmaStreamAllocate(spip->dmatx,
STM32_SPI_SPI1_IRQ_PRIORITY,
(stm32_dmaisr_t)spi_lld_serve_tx_interrupt,
(void *)spip);
chDbgAssert(!b, "spi_lld_start(), #2", "stream already allocated");
rccEnableSPI1(FALSE);
}
#endif
#if STM32_SPI_USE_SPI2
if (&SPID2 == spip) {
bool_t b;
b = dmaStreamAllocate(spip->dmarx,
STM32_SPI_SPI2_IRQ_PRIORITY,
(stm32_dmaisr_t)spi_lld_serve_rx_interrupt,
(void *)spip);
chDbgAssert(!b, "spi_lld_start(), #3", "stream already allocated");
b = dmaStreamAllocate(spip->dmatx,
STM32_SPI_SPI2_IRQ_PRIORITY,
(stm32_dmaisr_t)spi_lld_serve_tx_interrupt,
(void *)spip);
chDbgAssert(!b, "spi_lld_start(), #4", "stream already allocated");
rccEnableSPI2(FALSE);
}
#endif
#if STM32_SPI_USE_SPI3
if (&SPID3 == spip) {
bool_t b;
b = dmaStreamAllocate(spip->dmarx,
STM32_SPI_SPI3_IRQ_PRIORITY,
(stm32_dmaisr_t)spi_lld_serve_rx_interrupt,
(void *)spip);
chDbgAssert(!b, "spi_lld_start(), #5", "stream already allocated");
b = dmaStreamAllocate(spip->dmatx,
STM32_SPI_SPI3_IRQ_PRIORITY,
(stm32_dmaisr_t)spi_lld_serve_tx_interrupt,
(void *)spip);
chDbgAssert(!b, "spi_lld_start(), #6", "stream already allocated");
rccEnableSPI3(FALSE);
}
#endif
/* DMA setup.*/
dmaStreamSetPeripheral(spip->dmarx, &spip->spi->DR);
dmaStreamSetPeripheral(spip->dmatx, &spip->spi->DR);
}
/* Configuration-specific DMA setup.*/
if ((spip->config->cr1 & SPI_CR1_DFF) == 0) {
/* Frame width is 8 bits or smaller.*/
spip->rxdmamode = (spip->rxdmamode & ~STM32_DMA_CR_SIZE_MASK) |
STM32_DMA_CR_PSIZE_BYTE | STM32_DMA_CR_MSIZE_BYTE;
spip->txdmamode = (spip->txdmamode & ~STM32_DMA_CR_SIZE_MASK) |
STM32_DMA_CR_PSIZE_BYTE | STM32_DMA_CR_MSIZE_BYTE;
}
else {
/* Frame width is larger than 8 bits.*/
spip->rxdmamode = (spip->rxdmamode & ~STM32_DMA_CR_SIZE_MASK) |
STM32_DMA_CR_PSIZE_HWORD | STM32_DMA_CR_MSIZE_HWORD;
spip->txdmamode = (spip->txdmamode & ~STM32_DMA_CR_SIZE_MASK) |
STM32_DMA_CR_PSIZE_HWORD | STM32_DMA_CR_MSIZE_HWORD;
}
/* SPI setup and enable.*/
spip->spi->CR1 = 0;
spip->spi->CR1 = spip->config->cr1 | SPI_CR1_MSTR | SPI_CR1_SSM |
SPI_CR1_SSI;
spip->spi->CR2 = SPI_CR2_SSOE | SPI_CR2_RXDMAEN | SPI_CR2_TXDMAEN;
spip->spi->CR1 |= SPI_CR1_SPE;
}
/**
* @brief Deactivates the SPI peripheral.
*
* @param[in] spip pointer to the @p SPIDriver object
*
* @notapi
*/
void spi_lld_stop(SPIDriver *spip) {
/* If in ready state then disables the SPI clock.*/
if (spip->state == SPI_READY) {
/* SPI disable.*/
spip->spi->CR1 = 0;
spip->spi->CR2 = 0;
dmaStreamRelease(spip->dmarx);
dmaStreamRelease(spip->dmatx);
#if STM32_SPI_USE_SPI1
if (&SPID1 == spip)
rccDisableSPI1(FALSE);
#endif
#if STM32_SPI_USE_SPI2
if (&SPID2 == spip)
rccDisableSPI2(FALSE);
#endif
#if STM32_SPI_USE_SPI3
if (&SPID3 == spip)
rccDisableSPI3(FALSE);
#endif
}
}
/**
* @brief Asserts the slave select signal and prepares for transfers.
*
* @param[in] spip pointer to the @p SPIDriver object
*
* @notapi
*/
void spi_lld_select(SPIDriver *spip) {
palClearPad(spip->config->ssport, spip->config->sspad);
}
/**
* @brief Deasserts the slave select signal.
* @details The previously selected peripheral is unselected.
*
* @param[in] spip pointer to the @p SPIDriver object
*
* @notapi
*/
void spi_lld_unselect(SPIDriver *spip) {
palSetPad(spip->config->ssport, spip->config->sspad);
}
/**
* @brief Ignores data on the SPI bus.
* @details This asynchronous function starts the transmission of a series of
* idle words on the SPI bus and ignores the received data.
* @post At the end of the operation the configured callback is invoked.
*
* @param[in] spip pointer to the @p SPIDriver object
* @param[in] n number of words to be ignored
*
* @notapi
*/
void spi_lld_ignore(SPIDriver *spip, size_t n) {
dmaStreamSetMemory0(spip->dmarx, &dummyrx);
dmaStreamSetTransactionSize(spip->dmarx, n);
dmaStreamSetMode(spip->dmarx, spip->rxdmamode);
dmaStreamSetMemory0(spip->dmatx, &dummytx);
dmaStreamSetTransactionSize(spip->dmatx, n);
dmaStreamSetMode(spip->dmatx, spip->txdmamode);
dmaStreamEnable(spip->dmarx);
dmaStreamEnable(spip->dmatx);
}
/**
* @brief Exchanges data on the SPI bus.
* @details This asynchronous function starts a simultaneous transmit/receive
* operation.
* @post At the end of the operation the configured callback is invoked.
* @note The buffers are organized as uint8_t arrays for data sizes below or
* equal to 8 bits else it is organized as uint16_t arrays.
*
* @param[in] spip pointer to the @p SPIDriver object
* @param[in] n number of words to be exchanged
* @param[in] txbuf the pointer to the transmit buffer
* @param[out] rxbuf the pointer to the receive buffer
*
* @notapi
*/
void spi_lld_exchange(SPIDriver *spip, size_t n,
const void *txbuf, void *rxbuf) {
dmaStreamSetMemory0(spip->dmarx, rxbuf);
dmaStreamSetTransactionSize(spip->dmarx, n);
dmaStreamSetMode(spip->dmarx, spip->rxdmamode| STM32_DMA_CR_MINC);
dmaStreamSetMemory0(spip->dmatx, txbuf);
dmaStreamSetTransactionSize(spip->dmatx, n);
dmaStreamSetMode(spip->dmatx, spip->txdmamode | STM32_DMA_CR_MINC);
dmaStreamEnable(spip->dmarx);
dmaStreamEnable(spip->dmatx);
}
/**
* @brief Sends data over the SPI bus.
* @details This asynchronous function starts a transmit operation.
* @post At the end of the operation the configured callback is invoked.
* @note The buffers are organized as uint8_t arrays for data sizes below or
* equal to 8 bits else it is organized as uint16_t arrays.
*
* @param[in] spip pointer to the @p SPIDriver object
* @param[in] n number of words to send
* @param[in] txbuf the pointer to the transmit buffer
*
* @notapi
*/
void spi_lld_send(SPIDriver *spip, size_t n, const void *txbuf) {
dmaStreamSetMemory0(spip->dmarx, &dummyrx);
dmaStreamSetTransactionSize(spip->dmarx, n);
dmaStreamSetMode(spip->dmarx, spip->rxdmamode);
dmaStreamSetMemory0(spip->dmatx, txbuf);
dmaStreamSetTransactionSize(spip->dmatx, n);
dmaStreamSetMode(spip->dmatx, spip->txdmamode | STM32_DMA_CR_MINC);
dmaStreamEnable(spip->dmarx);
dmaStreamEnable(spip->dmatx);
}
/**
* @brief Receives data from the SPI bus.
* @details This asynchronous function starts a receive operation.
* @post At the end of the operation the configured callback is invoked.
* @note The buffers are organized as uint8_t arrays for data sizes below or
* equal to 8 bits else it is organized as uint16_t arrays.
*
* @param[in] spip pointer to the @p SPIDriver object
* @param[in] n number of words to receive
* @param[out] rxbuf the pointer to the receive buffer
*
* @notapi
*/
void spi_lld_receive(SPIDriver *spip, size_t n, void *rxbuf) {
dmaStreamSetMemory0(spip->dmarx, rxbuf);
dmaStreamSetTransactionSize(spip->dmarx, n);
dmaStreamSetMode(spip->dmarx, spip->rxdmamode | STM32_DMA_CR_MINC);
dmaStreamSetMemory0(spip->dmatx, &dummytx);
dmaStreamSetTransactionSize(spip->dmatx, n);
dmaStreamSetMode(spip->dmatx, spip->txdmamode);
dmaStreamEnable(spip->dmarx);
dmaStreamEnable(spip->dmatx);
}
/**
* @brief Exchanges one frame using a polled wait.
* @details This synchronous function exchanges one frame using a polled
* synchronization method. This function is useful when exchanging
* small amount of data on high speed channels, usually in this
* situation is much more efficient just wait for completion using
* polling than suspending the thread waiting for an interrupt.
*
* @param[in] spip pointer to the @p SPIDriver object
* @param[in] frame the data frame to send over the SPI bus
* @return The received data frame from the SPI bus.
*/
uint16_t spi_lld_polled_exchange(SPIDriver *spip, uint16_t frame) {
spip->spi->DR = frame;
while ((spip->spi->SR & SPI_SR_RXNE) == 0)
;
return spip->spi->DR;
}
#endif /* HAL_USE_SPI */
/** @} */
Reference in New Issue View Git Blame Copy Permalink