76 lines
2.4 KiB
Plaintext
76 lines
2.4 KiB
Plaintext
/*
|
|
ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010 Giovanni Di Sirio.
|
|
|
|
This file is part of ChibiOS/RT.
|
|
|
|
ChibiOS/RT is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
ChibiOS/RT is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
/**
|
|
* @defgroup LPC13xx LPC13xx Drivers
|
|
* @brief LPC13xx specific support.
|
|
* @details The LPC13xx support includes:
|
|
* - I/O ports driver.
|
|
* - Buffered, interrupt driven, serial driver.
|
|
* - A demo supporting the kernel test suite.
|
|
* .
|
|
* @ingroup platforms
|
|
*/
|
|
|
|
/**
|
|
* @defgroup LPC13xx_HAL LPC13xx HAL Support
|
|
* @brief HAL support.
|
|
*
|
|
* @ingroup LPC13xx
|
|
*/
|
|
|
|
/**
|
|
* @defgroup LPC13xx_PAL LPC13xx I/O Ports Support
|
|
* @brief I/O Ports peripherals support.
|
|
* @details This module supports the LPC13xx GPIO controller. The controller
|
|
* supports the following features (see @ref PAL):
|
|
* - 12 bits wide ports.
|
|
* - Atomic set/reset functions.
|
|
* - Atomic set+reset function (atomic bus operations).
|
|
* - Output latched regardless of the pad setting.
|
|
* - Direct read of input pads regardless of the pad setting.
|
|
* .
|
|
* <h2>Supported Setup Modes</h2>
|
|
* - @p PAL_MODE_RESET.
|
|
* - @p PAL_MODE_UNCONNECTED.
|
|
* - @p PAL_MODE_INPUT.
|
|
* - @p PAL_MODE_OUTPUT_PUSHPULL.
|
|
* .
|
|
* Any attempt to setup an invalid mode is ignored.
|
|
*
|
|
* <h2>Suboptimal Behavior</h2>
|
|
* Some GPIO features are less than optimal:
|
|
* - Pad/port toggling operations are not atomic.
|
|
* - Pull-up and Pull-down resistors cannot be programmed through the PAL
|
|
* driver and must be programmed separately.
|
|
* - Reading of the output latch for pads programmed as input is not possible,
|
|
* the input pin value is returned instead.
|
|
* .
|
|
* @ingroup LPC13xx
|
|
*/
|
|
|
|
/**
|
|
* @defgroup LPC13xx_SERIAL LPC13xx UART Support
|
|
* @brief UART peripherals support.
|
|
* @details The serial driver supports the LPC13xx UART taking advantage of
|
|
* its deep hardware buffers.
|
|
*
|
|
* @ingroup LPC13xx
|
|
*/
|