tinySA/os/hal/ports/KINETIS/K20x/spi_lld.h

231 lines
6.9 KiB
C

/*
ChibiOS - Copyright (C) 2014-2015 Fabio Utzig
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/**
* @file KINETIS/spi_lld.h
* @brief KINETIS SPI subsystem low level driver header.
*
* @addtogroup SPI
* @{
*/
#ifndef _SPI_LLD_H_
#define _SPI_LLD_H_
#if HAL_USE_SPI || defined(__DOXYGEN__)
/*===========================================================================*/
/* Driver constants. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver pre-compile time settings. */
/*===========================================================================*/
/**
* @name Configuration options
* @{
*/
/**
* @brief SPI0 driver enable switch.
* @details If set to @p TRUE the support for SPI0 is included.
* @note The default is @p FALSE.
*/
#if !defined(KINETIS_SPI_USE_SPI0) || defined(__DOXYGEN__)
#define KINETIS_SPI_USE_SPI0 FALSE
#endif
/**
* @brief SPI0 interrupt priority level setting.
*/
#if !defined(KINETIS_SPI_SPI0_IRQ_PRIORITY) || defined(__DOXYGEN__)
#define KINETIS_SPI_SPI0_IRQ_PRIORITY 10
#endif
/*===========================================================================*/
/* Derived constants and error checks. */
/*===========================================================================*/
#define KINETIS_HAS_SPI0 TRUE
#if KINETIS_SPI_USE_SPI0 && !KINETIS_HAS_SPI0
#error "SPI0 not present in the selected device"
#endif
#if !KINETIS_SPI_USE_SPI0
#error "SPI driver activated but no SPI peripheral assigned"
#endif
#if KINETIS_SPI_USE_SPI0 && \
!OSAL_IRQ_IS_VALID_PRIORITY(KINETIS_SPI_SPI0_IRQ_PRIORITY)
#error "Invalid IRQ priority assigned to SPI0"
#endif
/*===========================================================================*/
/* Driver data structures and types. */
/*===========================================================================*/
/**
* @brief Type of a structure representing an SPI driver.
*/
typedef struct SPIDriver SPIDriver;
/**
* @brief SPI notification callback type.
*
* @param[in] spip pointer to the @p SPIDriver object triggering the
* callback
*/
typedef void (*spicallback_t)(SPIDriver *spip);
/**
* @brief Driver configuration structure.
*/
typedef struct {
/**
* @brief Operation complete callback or @p NULL.
*/
spicallback_t end_cb;
/* End of the mandatory fields.*/
/**
* @brief The chip select line port - when not using pcs.
*/
ioportid_t ssport;
/**
* @brief The chip select line pad number - when not using pcs.
*/
uint16_t sspad;
/**
* @brief SPI initialization data.
*/
uint32_t tar0;
} SPIConfig;
/**
* @brief Structure representing a SPI driver.
*/
struct SPIDriver {
/**
* @brief Driver state.
*/
spistate_t state;
/**
* @brief Current configuration data.
*/
const SPIConfig *config;
#if SPI_USE_WAIT || defined(__DOXYGEN__)
/**
* @brief Waiting thread.
*/
thread_reference_t thread;
#endif /* SPI_USE_WAIT */
#if SPI_USE_MUTUAL_EXCLUSION || defined(__DOXYGEN__)
/**
* @brief Mutex protecting the bus.
*/
mutex_t mutex;
#endif /* SPI_USE_MUTUAL_EXCLUSION */
#if defined(SPI_DRIVER_EXT_FIELDS)
SPI_DRIVER_EXT_FIELDS
#endif
/* End of the mandatory fields.*/
/**
* @brief Pointer to the SPIx registers block.
*/
SPI_TypeDef *spi;
/**
* @brief Number of bytes/words of data to transfer.
*/
size_t count;
/**
* @brief Word size in bytes.
*/
size_t word_size;
/**
* @brief Pointer to the buffer with data to send.
*/
const uint8_t *txbuf;
/**
* @brief Pointer to the buffer to put received data.
*/
uint8_t *rxbuf;
};
/*===========================================================================*/
/* Driver macros. */
/*===========================================================================*/
/* TAR settings for n bits at SYSCLK / 2 */
#define KINETIS_SPI_TAR_SYSCLK_DIV_2(n)\
SPIx_CTARn_FMSZ((n) - 1) | \
SPIx_CTARn_CPOL | \
SPIx_CTARn_CPHA | \
SPIx_CTARn_DBR | \
SPIx_CTARn_PBR(0) | \
SPIx_CTARn_BR(0) | \
SPIx_CTARn_CSSCK(0) | \
SPIx_CTARn_ASC(0) | \
SPIx_CTARn_DT(0)
/* TAR settings for n bits at SYSCLK / 4096 for debugging */
#define KINETIS_SPI_TAR_SYSCLK_DIV_4096(n) \
SPIx_CTARn_FMSZ(((n) - 1)) | \
SPIx_CTARn_CPOL | \
SPIx_CTARn_CPHA | \
SPIx_CTARn_PBR(0) | \
SPIx_CTARn_BR(0xB) | \
SPIx_CTARn_CSSCK(0xB) | \
SPIx_CTARn_ASC(0x7) | \
SPIx_CTARn_DT(0xB)
#define KINETIS_SPI_TAR_8BIT_FAST KINETIS_SPI_TAR_SYSCLK_DIV_2(8)
#define KINETIS_SPI_TAR_8BIT_SLOW KINETIS_SPI_TAR_SYSCLK_DIV_4096(8)
#define KINETIS_SPI_TAR0_DEFAULT KINETIS_SPI_TAR_SYSCLK_DIV_2(8)
#define KINETIS_SPI_TAR1_DEFAULT KINETIS_SPI_TAR_SYSCLK_DIV_2(8)
/*===========================================================================*/
/* External declarations. */
/*===========================================================================*/
#if KINETIS_SPI_USE_SPI0 && !defined(__DOXYGEN__)
extern SPIDriver SPID1;
#endif
#ifdef __cplusplus
extern "C" {
#endif
void spi_lld_init(void);
void spi_lld_start(SPIDriver *spip);
void spi_lld_stop(SPIDriver *spip);
void spi_lld_select(SPIDriver *spip);
void spi_lld_unselect(SPIDriver *spip);
void spi_lld_ignore(SPIDriver *spip, size_t n);
void spi_lld_exchange(SPIDriver *spip, size_t n,
const void *txbuf, void *rxbuf);
void spi_lld_send(SPIDriver *spip, size_t n, const void *txbuf);
void spi_lld_receive(SPIDriver *spip, size_t n, void *rxbuf);
uint16_t spi_lld_polled_exchange(SPIDriver *spip, uint16_t frame);
#ifdef __cplusplus
}
#endif
#endif /* HAL_USE_SPI */
#endif /* _SPI_LLD_H_ */
/** @} */