This file contains invisible Unicode characters that may be processed differently from what appears below. If your use case is intentional and legitimate, you can safely ignore this warning. Use the Escape button to reveal hidden characters.
*****************************************************************************
** ChibiOS/RT port for ARM-Cortex-M4 STM32F407. **
*****************************************************************************
** TARGET **
The demo runs on an ST STM32F4-Discovery board.
** The Demo **
The demo shows how to use the ADC, PWM and SPI drivers using asynchronous
APIs. The ADC samples two channels (temperature sensor and PC1) and modulates
the PWM using the sampled values. The sample data is also transmitted using
the SPI port 2 (NSS=PB12, SCK=PB13, MISO=PB14, MOSI=PB15).
By pressing the button located on the board the test procedure is activated
with output on the serial port SD2 (USART2).
** Build Procedure **
The demo has been tested by using the free Codesourcery GCC-based toolchain
and YAGARTO. just modify the TRGT line in the makefile in order to use
different GCC toolchains.
** Notes **
Some files used by the demo are not part of ChibiOS/RT but are copyright of
ST Microelectronics and are licensed under a different license.
Also note that not all the files present in the ST library are distributed
with ChibiOS/RT, you can find the whole library on the ST web site:
http://www.st.com
097062ca3b