304 lines
10 KiB
C
304 lines
10 KiB
C
/*
|
|
ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
|
|
|
|
Licensed under the Apache License, Version 2.0 (the "License");
|
|
you may not use this file except in compliance with the License.
|
|
You may obtain a copy of the License at
|
|
|
|
http://www.apache.org/licenses/LICENSE-2.0
|
|
|
|
Unless required by applicable law or agreed to in writing, software
|
|
distributed under the License is distributed on an "AS IS" BASIS,
|
|
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
See the License for the specific language governing permissions and
|
|
limitations under the License.
|
|
*/
|
|
|
|
/**
|
|
* @file STM32/USARTv1/serial_lld.h
|
|
* @brief STM32 low level serial driver header.
|
|
*
|
|
* @addtogroup SERIAL
|
|
* @{
|
|
*/
|
|
|
|
#ifndef _SERIAL_LLD_H_
|
|
#define _SERIAL_LLD_H_
|
|
|
|
#if HAL_USE_SERIAL || defined(__DOXYGEN__)
|
|
|
|
/*===========================================================================*/
|
|
/* Driver constants. */
|
|
/*===========================================================================*/
|
|
|
|
/*===========================================================================*/
|
|
/* Driver pre-compile time settings. */
|
|
/*===========================================================================*/
|
|
|
|
/**
|
|
* @name Configuration options
|
|
* @{
|
|
*/
|
|
/**
|
|
* @brief USART1 driver enable switch.
|
|
* @details If set to @p TRUE the support for USART1 is included.
|
|
* @note The default is @p TRUE.
|
|
*/
|
|
#if !defined(STM32_SERIAL_USE_USART1) || defined(__DOXYGEN__)
|
|
#define STM32_SERIAL_USE_USART1 FALSE
|
|
#endif
|
|
|
|
/**
|
|
* @brief USART2 driver enable switch.
|
|
* @details If set to @p TRUE the support for USART2 is included.
|
|
* @note The default is @p TRUE.
|
|
*/
|
|
#if !defined(STM32_SERIAL_USE_USART2) || defined(__DOXYGEN__)
|
|
#define STM32_SERIAL_USE_USART2 FALSE
|
|
#endif
|
|
|
|
/**
|
|
* @brief USART3 driver enable switch.
|
|
* @details If set to @p TRUE the support for USART3 is included.
|
|
* @note The default is @p TRUE.
|
|
*/
|
|
#if !defined(STM32_SERIAL_USE_USART3) || defined(__DOXYGEN__)
|
|
#define STM32_SERIAL_USE_USART3 FALSE
|
|
#endif
|
|
|
|
/**
|
|
* @brief UART4 driver enable switch.
|
|
* @details If set to @p TRUE the support for UART4 is included.
|
|
* @note The default is @p TRUE.
|
|
*/
|
|
#if !defined(STM32_SERIAL_USE_UART4) || defined(__DOXYGEN__)
|
|
#define STM32_SERIAL_USE_UART4 FALSE
|
|
#endif
|
|
|
|
/**
|
|
* @brief UART5 driver enable switch.
|
|
* @details If set to @p TRUE the support for UART5 is included.
|
|
* @note The default is @p TRUE.
|
|
*/
|
|
#if !defined(STM32_SERIAL_USE_UART5) || defined(__DOXYGEN__)
|
|
#define STM32_SERIAL_USE_UART5 FALSE
|
|
#endif
|
|
|
|
/**
|
|
* @brief USART6 driver enable switch.
|
|
* @details If set to @p TRUE the support for USART6 is included.
|
|
* @note The default is @p TRUE.
|
|
*/
|
|
#if !defined(STM32_SERIAL_USE_USART6) || defined(__DOXYGEN__)
|
|
#define STM32_SERIAL_USE_USART6 FALSE
|
|
#endif
|
|
|
|
/**
|
|
* @brief USART1 interrupt priority level setting.
|
|
*/
|
|
#if !defined(STM32_SERIAL_USART1_PRIORITY) || defined(__DOXYGEN__)
|
|
#define STM32_SERIAL_USART1_PRIORITY 12
|
|
#endif
|
|
|
|
/**
|
|
* @brief USART2 interrupt priority level setting.
|
|
*/
|
|
#if !defined(STM32_SERIAL_USART2_PRIORITY) || defined(__DOXYGEN__)
|
|
#define STM32_SERIAL_USART2_PRIORITY 12
|
|
#endif
|
|
|
|
/**
|
|
* @brief USART3 interrupt priority level setting.
|
|
*/
|
|
#if !defined(STM32_SERIAL_USART3_PRIORITY) || defined(__DOXYGEN__)
|
|
#define STM32_SERIAL_USART3_PRIORITY 12
|
|
#endif
|
|
|
|
/**
|
|
* @brief UART4 interrupt priority level setting.
|
|
*/
|
|
#if !defined(STM32_SERIAL_UART4_PRIORITY) || defined(__DOXYGEN__)
|
|
#define STM32_SERIAL_UART4_PRIORITY 12
|
|
#endif
|
|
|
|
/**
|
|
* @brief UART5 interrupt priority level setting.
|
|
*/
|
|
#if !defined(STM32_SERIAL_UART5_PRIORITY) || defined(__DOXYGEN__)
|
|
#define STM32_SERIAL_UART5_PRIORITY 12
|
|
#endif
|
|
|
|
/**
|
|
* @brief USART6 interrupt priority level setting.
|
|
*/
|
|
#if !defined(STM32_SERIAL_USART6_PRIORITY) || defined(__DOXYGEN__)
|
|
#define STM32_SERIAL_USART6_PRIORITY 12
|
|
#endif
|
|
/** @} */
|
|
|
|
/*===========================================================================*/
|
|
/* Derived constants and error checks. */
|
|
/*===========================================================================*/
|
|
|
|
#if STM32_SERIAL_USE_USART1 && !STM32_HAS_USART1
|
|
#error "USART1 not present in the selected device"
|
|
#endif
|
|
|
|
#if STM32_SERIAL_USE_USART2 && !STM32_HAS_USART2
|
|
#error "USART2 not present in the selected device"
|
|
#endif
|
|
|
|
#if STM32_SERIAL_USE_USART3 && !STM32_HAS_USART3
|
|
#error "USART3 not present in the selected device"
|
|
#endif
|
|
|
|
#if STM32_SERIAL_USE_UART4 && !STM32_HAS_UART4
|
|
#error "UART4 not present in the selected device"
|
|
#endif
|
|
|
|
#if STM32_SERIAL_USE_UART5 && !STM32_HAS_UART5
|
|
#error "UART5 not present in the selected device"
|
|
#endif
|
|
|
|
#if STM32_SERIAL_USE_USART6 && !STM32_HAS_USART6
|
|
#error "USART6 not present in the selected device"
|
|
#endif
|
|
|
|
#if !STM32_SERIAL_USE_USART1 && !STM32_SERIAL_USE_USART2 && \
|
|
!STM32_SERIAL_USE_USART3 && !STM32_SERIAL_USE_UART4 && \
|
|
!STM32_SERIAL_USE_UART5 && !STM32_SERIAL_USE_USART6
|
|
#error "SERIAL driver activated but no USART/UART peripheral assigned"
|
|
#endif
|
|
|
|
#if STM32_SERIAL_USE_USART1 && \
|
|
!CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_SERIAL_USART1_PRIORITY)
|
|
#error "Invalid IRQ priority assigned to USART1"
|
|
#endif
|
|
|
|
#if STM32_SERIAL_USE_USART2 && \
|
|
!CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_SERIAL_USART2_PRIORITY)
|
|
#error "Invalid IRQ priority assigned to USART2"
|
|
#endif
|
|
|
|
#if STM32_SERIAL_USE_USART3 && \
|
|
!CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_SERIAL_USART3_PRIORITY)
|
|
#error "Invalid IRQ priority assigned to USART3"
|
|
#endif
|
|
|
|
#if STM32_SERIAL_USE_UART4 && \
|
|
!CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_SERIAL_UART4_PRIORITY)
|
|
#error "Invalid IRQ priority assigned to UART4"
|
|
#endif
|
|
|
|
#if STM32_SERIAL_USE_UART5 && \
|
|
!CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_SERIAL_UART5_PRIORITY)
|
|
#error "Invalid IRQ priority assigned to UART5"
|
|
#endif
|
|
|
|
#if STM32_SERIAL_USE_USART6 && \
|
|
!CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_SERIAL_USART6_PRIORITY)
|
|
#error "Invalid IRQ priority assigned to USART6"
|
|
#endif
|
|
|
|
/*===========================================================================*/
|
|
/* Driver data structures and types. */
|
|
/*===========================================================================*/
|
|
|
|
/**
|
|
* @brief STM32 Serial Driver configuration structure.
|
|
* @details An instance of this structure must be passed to @p sdStart()
|
|
* in order to configure and start a serial driver operations.
|
|
* @note This structure content is architecture dependent, each driver
|
|
* implementation defines its own version and the custom static
|
|
* initializers.
|
|
*/
|
|
typedef struct {
|
|
/**
|
|
* @brief Bit rate.
|
|
*/
|
|
uint32_t speed;
|
|
/* End of the mandatory fields.*/
|
|
/**
|
|
* @brief Initialization value for the CR1 register.
|
|
*/
|
|
uint16_t cr1;
|
|
/**
|
|
* @brief Initialization value for the CR2 register.
|
|
*/
|
|
uint16_t cr2;
|
|
/**
|
|
* @brief Initialization value for the CR3 register.
|
|
*/
|
|
uint16_t cr3;
|
|
} SerialConfig;
|
|
|
|
/**
|
|
* @brief @p SerialDriver specific data.
|
|
*/
|
|
#define _serial_driver_data \
|
|
_base_asynchronous_channel_data \
|
|
/* Driver state.*/ \
|
|
sdstate_t state; \
|
|
/* Input queue.*/ \
|
|
InputQueue iqueue; \
|
|
/* Output queue.*/ \
|
|
OutputQueue oqueue; \
|
|
/* Input circular buffer.*/ \
|
|
uint8_t ib[SERIAL_BUFFERS_SIZE]; \
|
|
/* Output circular buffer.*/ \
|
|
uint8_t ob[SERIAL_BUFFERS_SIZE]; \
|
|
/* End of the mandatory fields.*/ \
|
|
/* Pointer to the USART registers block.*/ \
|
|
USART_TypeDef *usart;
|
|
|
|
/*===========================================================================*/
|
|
/* Driver macros. */
|
|
/*===========================================================================*/
|
|
|
|
/*
|
|
* Extra USARTs definitions here (missing from the ST header file).
|
|
*/
|
|
#define USART_CR2_STOP1_BITS (0 << 12) /**< @brief CR2 1 stop bit value.*/
|
|
#define USART_CR2_STOP0P5_BITS (1 << 12) /**< @brief CR2 0.5 stop bit value.*/
|
|
#define USART_CR2_STOP2_BITS (2 << 12) /**< @brief CR2 2 stop bit value.*/
|
|
#define USART_CR2_STOP1P5_BITS (3 << 12) /**< @brief CR2 1.5 stop bit value.*/
|
|
|
|
/*===========================================================================*/
|
|
/* External declarations. */
|
|
/*===========================================================================*/
|
|
|
|
#if STM32_SERIAL_USE_USART1 && !defined(__DOXYGEN__)
|
|
extern SerialDriver SD1;
|
|
#endif
|
|
#if STM32_SERIAL_USE_USART2 && !defined(__DOXYGEN__)
|
|
extern SerialDriver SD2;
|
|
#endif
|
|
#if STM32_SERIAL_USE_USART3 && !defined(__DOXYGEN__)
|
|
extern SerialDriver SD3;
|
|
#endif
|
|
#if STM32_SERIAL_USE_UART4 && !defined(__DOXYGEN__)
|
|
extern SerialDriver SD4;
|
|
#endif
|
|
#if STM32_SERIAL_USE_UART5 && !defined(__DOXYGEN__)
|
|
extern SerialDriver SD5;
|
|
#endif
|
|
#if STM32_SERIAL_USE_USART6 && !defined(__DOXYGEN__)
|
|
extern SerialDriver SD6;
|
|
#endif
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
void sd_lld_init(void);
|
|
void sd_lld_start(SerialDriver *sdp, const SerialConfig *config);
|
|
void sd_lld_stop(SerialDriver *sdp);
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif /* HAL_USE_SERIAL */
|
|
|
|
#endif /* _SERIAL_LLD_H_ */
|
|
|
|
/** @} */
|