/* ChibiOS/RT - Copyright (C) 2006-2007 Giovanni Di Sirio. This file is part of ChibiOS/RT. ChibiOS/RT is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3 of the License, or (at your option) any later version. ChibiOS/RT is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . */ /** * @file serial.h * @brief Serial Driver macros and structures. * * @addtogroup SERIAL * @{ */ #ifndef _SERIAL_H_ #define _SERIAL_H_ #if CH_HAL_USE_SERIAL || defined(__DOXYGEN__) /*===========================================================================*/ /* Driver constants. */ /*===========================================================================*/ /** @brief No pending conditions.*/ #define SD_NO_ERROR 0 /** @brief Connection happened.*/ #define SD_CONNECTED 1 /** @brief Disconnection happened.*/ #define SD_DISCONNECTED 2 /** @brief Parity error happened.*/ #define SD_PARITY_ERROR 4 /** @brief Framing error happened.*/ #define SD_FRAMING_ERROR 8 /** @brief Overflow happened.*/ #define SD_OVERRUN_ERROR 16 /** @brief Noise on the line.*/ #define SD_NOISE_ERROR 32 /** @brief Break detected.*/ #define SD_BREAK_DETECTED 64 /*===========================================================================*/ /* Driver pre-compile time settings. */ /*===========================================================================*/ /** * @brief Default bit rate. * @details Configuration parameter, this is the baud rate selected for the * default configuration. */ #if !defined(DEFAULT_USART_BITRATE) || defined(__DOXYGEN__) #define SERIAL_DEFAULT_BITRATE 38400 #endif /** * @brief Serial buffers size. * @details Configuration parameter, you can change the depth of the queue * buffers depending on the requirements of your application. * @note The default is 64 bytes for both the transmission and receive * buffers. */ #if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) #define SERIAL_BUFFERS_SIZE 64 #endif /*===========================================================================*/ /* Derived constants and error checks. */ /*===========================================================================*/ #if !CH_USE_QUEUES && !CH_USE_EVENTS #error "Serial Driver requires CH_USE_QUEUES and CH_USE_EVENTS" #endif /*===========================================================================*/ /* Driver data structures and types. */ /*===========================================================================*/ /** * @brief Driver state machine possible states. */ typedef enum { SD_UNINIT = 0, /**< @brief Not initialized. */ SD_STOP = 1, /**< @brief Stopped. */ SD_READY = 2 /**< @brief Ready. */ } sdstate_t; /** * @brief Structure representing a serial driver. */ typedef struct _SerialDriver SerialDriver; #include "serial_lld.h" /** * @brief @p SerialDriver specific methods. */ #define _serial_driver_methods \ _base_asynchronous_channel_methods /** * @brief @p SerialDriver virtual methods table. */ struct SerialDriverVMT { _serial_driver_methods }; /** * @extends BaseAsynchronousChannel * * @brief Full duplex serial driver class. * @details This class extends @p BaseAsynchronousChannel by adding physical * I/O queues. */ struct _SerialDriver { /** @brief Virtual Methods Table.*/ const struct SerialDriverVMT *vmt; _serial_driver_data }; /*===========================================================================*/ /* Driver macros. */ /*===========================================================================*/ /** * @brief Direct output check on a @p SerialDriver. * @details This function bypasses the indirect access to the channel and * checks directly the output queue. This is faster but cannot * be used to check different channels implementations. * * @see chIOPutWouldBlock() */ #define sdPutWouldBlock(sdp) chOQIsFull(&(sdp)->oqueue) /** * @brief Direct input check on a @p SerialDriver. * @details This function bypasses the indirect access to the channel and * checks directly the input queue. This is faster but cannot * be used to check different channels implementations. * * @see chIOGetWouldBlock() */ #define sdGetWouldBlock(sdp) chIQIsEmpty(&(sdp)->iqueue) /** * @brief Direct write to a @p SerialDriver. * @details This function bypasses the indirect access to the channel and * writes directly on the output queue. This is faster but cannot * be used to write to different channels implementations. * * @see chIOPut() */ #define sdPut(sdp, b) chOQPut(&(sdp)->oqueue, b) /** * @brief Direct write to a @p SerialDriver with timeout specification. * @details This function bypasses the indirect access to the channel and * writes directly on the output queue. This is faster but cannot * be used to write to different channels implementations. * * @see chIOPutTimeout() */ #define sdPutTimeout(sdp, b, t) chOQPutTimeout(&(sdp)->iqueue, b, t) /** * @brief Direct read from a @p SerialDriver. * @details This function bypasses the indirect access to the channel and * reads directly from the input queue. This is faster but cannot * be used to read from different channels implementations. * * @see chIOGet() */ #define sdGet(sdp) chIQGet(&(sdp)->iqueue) /** * @brief Direct read from a @p SerialDriver with timeout specification. * @details This function bypasses the indirect access to the channel and * reads directly from the input queue. This is faster but cannot * be used to read from different channels implementations. * * @see chIOGetTimeout() */ #define sdGetTimeout(sdp, t) chIQGetTimeout(&(sdp)->iqueue, t) /** * @brief Direct blocking write to a @p SerialDriver. * @details This function bypasses the indirect access to the channel and * writes directly to the output queue. This is faster but cannot * be used to write from different channels implementations. * * @see chIOWriteTimeout() */ #define sdWrite(sdp, b, n) \ chOQWriteTimeout(&(sdp)->oqueue, b, n, TIME_INFINITE) /** * @brief Direct blocking write to a @p SerialDriver with timeout * specification. * @details This function bypasses the indirect access to the channel and * writes directly to the output queue. This is faster but cannot * be used to write from different channels implementations. * * @see chIOWriteTimeout() */ #define sdWriteTimeout(sdp, b, n, t) \ chOQWriteTimeout(&(sdp)->oqueue, b, n, t) /** * @brief Direct non-blocking write to a @p SerialDriver. * @details This function bypasses the indirect access to the channel and * writes directly to the output queue. This is faster but cannot * be used to write from different channels implementations. * * @see chIOWriteTimeout() */ #define sdAsynchronousWrite(sdp, b, n) \ chOQWriteTimeout(&(sdp)->oqueue, b, n, TIME_IMMEDIATE) /** * @brief Direct blocking read from a @p SerialDriver. * @details This function bypasses the indirect access to the channel and * reads directly from the input queue. This is faster but cannot * be used to read from different channels implementations. * * @see chIOReadTimeout() */ #define sdRead(sdp, b, n) \ chIQReadTimeout(&(sdp)->iqueue, b, n, TIME_INFINITE) /** * @brief Direct blocking read from a @p SerialDriver with timeout * specification. * @details This function bypasses the indirect access to the channel and * reads directly from the input queue. This is faster but cannot * be used to read from different channels implementations. * * @see chIOReadTimeout() */ #define sdReadTimeout(sdp, b, n, t) \ chIQReadTimeout(&(sdp)->iqueue, b, n, t) /** * @brief Direct non-blocking read from a @p SerialDriver. * @details This function bypasses the indirect access to the channel and * reads directly from the input queue. This is faster but cannot * be used to read from different channels implementations. * * @see chIOReadTimeout() */ #define sdAsynchronousRead(sdp, b, n) \ chIQReadTimeout(&(sdp)->iqueue, b, n, TIME_IMMEDIATE) /** * @brief Returns the status change event source. * @details The status change event source is broadcasted when the channel * status is updated, the status flags can then be fetched and * cheared by using @p sdGetAndClearFlags(). * * @param[in] ip pointer to a @p SerialDriver object * @return A pointer to an @p EventSource object. */ #define sdGetStatusChangeEventSource(ip) (&((ip)->vmt->sevent)) /*===========================================================================*/ /* External declarations. */ /*===========================================================================*/ #ifdef __cplusplus extern "C" { #endif void sdInit(void); void sdObjectInit(SerialDriver *sdp, qnotify_t inotify, qnotify_t onotify); void sdStart(SerialDriver *sdp, const SerialConfig *config); void sdStop(SerialDriver *sdp); void sdIncomingDataI(SerialDriver *sdp, uint8_t b); msg_t sdRequestDataI(SerialDriver *sdp); void sdAddFlagsI(SerialDriver *sdp, sdflags_t mask); sdflags_t sdGetAndClearFlags(SerialDriver *sdp); #ifdef __cplusplus } #endif #endif /* CH_HAL_USE_SERIAL */ #endif /* _SERIAL_H_ */ /** @} */