/*
    ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010 Giovanni Di Sirio.

    This file is part of ChibiOS/RT.

    ChibiOS/RT is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 3 of the License, or
    (at your option) any later version.

    ChibiOS/RT is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program.  If not, see <http://www.gnu.org/licenses/>.
*/

/**
 * @file    LPC214x/pal_lld.h
 * @brief   LPC214x FIO low level driver header.
 *
 * @addtogroup LPC214x_PAL
 * @{
 */

#ifndef _PAL_LLD_H_
#define _PAL_LLD_H_

#if CH_HAL_USE_PAL || defined(__DOXYGEN__)

/*===========================================================================*/
/* Unsupported modes and specific modes                                      */
/*===========================================================================*/

#undef PAL_MODE_INPUT_PULLUP
#undef PAL_MODE_INPUT_PULLDOWN
#undef PAL_MODE_OUTPUT_OPENDRAIN

/*===========================================================================*/
/* I/O Ports Types and constants.                                            */
/*===========================================================================*/

/**
 * @brief   FIO port setup info.
 */
typedef struct {
  /** Initial value for FIO_PIN register.*/
  uint32_t      pin;
  /** Initial value for FIO_DIR register.*/
  uint32_t      dir;
} lpc214x_fio_setup_t;

/**
 * @brief   LPC214x FIO static initializer.
 * @details An instance of this structure must be passed to @p palInit() at
 *          system startup time in order to initialize the digital I/O
 *          subsystem. This represents only the initial setup, specific pads
 *          or whole ports can be reprogrammed at later time.
 */
typedef struct {
  /** @brief PINSEL0 initial value.*/
  uint32_t              pinsel0;
  /** @brief PINSEL1 initial value.*/
  uint32_t              pinsel1;
  /** @brief PINSEL2 initial value.*/
  uint32_t              pinsel2;
  /** @brief Port 0 setup data.*/
  lpc214x_fio_setup_t   P0Data;
  /** @brief Port 1 setup data.*/
  lpc214x_fio_setup_t   P1Data;
} PALConfig;

/**
 * @brief   Width, in bits, of an I/O port.
 */
#define PAL_IOPORTS_WIDTH 32

/**
 * @brief   Whole port mask.
 * @details This macro specifies all the valid bits into a port.
 */
#define PAL_WHOLE_PORT ((ioportmask_t)0xFFFFFFFF)

/**
 * @brief   Digital I/O port sized unsigned type.
 */
typedef uint32_t ioportmask_t;

/**
 * @brief   Port Identifier.
 */
typedef FIO * ioportid_t;

/*===========================================================================*/
/* I/O Ports Identifiers.                                                    */
/*===========================================================================*/

/**
 * @brief   FIO port 0 identifier.
 */
#define IOPORT1        FIO0Base

/**
 * @brief   FIO port 1 identifier.
 */
#define IOPORT2        FIO1Base

/*===========================================================================*/
/* Implementation, some of the following macros could be implemented as      */
/* functions, please put them in a file named ioports_lld.c if so.           */
/*===========================================================================*/

/**
 * @brief   FIO subsystem initialization.
 * @details Enables the access through the fast registers.
 */
#define pal_lld_init(config) _pal_lld_init(config)

/**
 * @brief   Reads an I/O port.
 * @details This function is implemented by reading the FIO PIN register, the
 *          implementation has no side effects.
 *
 * @param[in] port      the port identifier
 * @return              The port bits.
 *
 * @notapi
 */
#define pal_lld_readport(port) ((port)->FIO_PIN)

/**
 * @brief   Reads the output latch.
 * @details This function is implemented by reading the FIO SET register, the
 *          implementation has no side effects.
 *
 * @param[in] port      the port identifier
 * @return              The latched logical states.
 *
 * @notapi
 */
#define pal_lld_readlatch(port) ((port)->FIO_SET)

/**
 * @brief   Writes a bits mask on a I/O port.
 * @details This function is implemented by writing the FIO PIN register, the
 *          implementation has no side effects.
 *
 * @param[in] port      the port identifier
 * @param[in] bits      the bits to be written on the specified port
 *
 * @notapi
 */
#define pal_lld_writeport(port, bits) ((port)->FIO_PIN = (bits))

/**
 * @brief   Sets a bits mask on a I/O port.
 * @details This function is implemented by writing the FIO SET register, the
 *          implementation has no side effects.
 *
 * @param[in] port      the port identifier
 * @param[in] bits      the bits to be ORed on the specified port
 *
 * @notapi
 */
#define pal_lld_setport(port, bits) ((port)->FIO_SET = (bits))

/**
 * @brief   Clears a bits mask on a I/O port.
 * @details This function is implemented by writing the FIO CLR register, the
 *          implementation has no side effects.
 *
 * @param[in] port      the port identifier
 * @param[in] bits      the bits to be cleared on the specified port
 *
 * @notapi
 */
#define pal_lld_clearport(port, bits) ((port)->FIO_CLR = (bits))

/**
 * @brief   Writes a value on an I/O bus.
 * @details This function is implemented by writing the FIO PIN and MASK
 *          registers, the implementation is not atomic because the multiple
 *          accesses.
 *
 * @param[in] port      the port identifier
 * @param[in] mask      the group mask, a logical AND is performed on the
 *                      output data
 * @param[in] offset    the group bit offset within the port
 * @param[in] bits      the bits to be written. Values exceeding the group
 *                      width are masked.
 *
 * @notapi
 */
#define pal_lld_writegroup(port, mask, offset, bits) {                  \
  (port)->FIO_MASK = ~((mask) << (offset));                             \
  (port)->FIO_PIN = (bits) << (offset);                                 \
  (port)->FIO_MASK = 0;                                                 \
}

/**
 * @brief   Pads group mode setup.
 * @details This function programs a pads group belonging to the same port
 *          with the specified mode.
 * @note    @p PAL_MODE_UNCONNECTED is implemented as push pull output with
 *          high state.
 * @note    This function does not alter the @p PINSELx registers. Alternate
 *          functions setup must be handled by device-specific code.
 *
 * @param[in] port      the port identifier
 * @param[in] mask      the group mask
 * @param[in] mode      the mode
 *
 * @notapi
 */
#define pal_lld_setgroupmode(port, mask, mode) \
  _pal_lld_setgroupmode(port, mask, mode)

/**
 * @brief   Writes a logical state on an output pad.
 *
 * @param[in] port      the port identifier
 * @param[in] pad       the pad number within the port
 * @param[in] bit       logical value, the value must be @p PAL_LOW or
 *                      @p PAL_HIGH
 *
 * @notapi
 */
#define pal_lld_writepad(port, pad, bit) pal_lld_writegroup(port, 1, pad, bit)

/**
 * @brief   FIO port setup.
 * @details This function programs the pins direction within a port.
 *
 * @notapi
 */
#define pal_lld_lpc214x_set_direction(port, dir) {                      \
  (port)->FIO_DIR = (dir);                                              \
}

extern const PALConfig pal_default_config;

#ifdef __cplusplus
extern "C" {
#endif
  void _pal_lld_init(const PALConfig *config);
  void _pal_lld_setgroupmode(ioportid_t port,
                             ioportmask_t mask,
                             uint_fast8_t mode);
#ifdef __cplusplus
}
#endif

#endif /* CH_HAL_USE_PAL */

#endif /* _PAL_LLD_H_ */

/** @} */