/* ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. */ /** * @file STM32/USARTv1/uart_lld.c * @brief STM32 low level UART driver code. * * @addtogroup UART * @{ */ #include "hal.h" #if HAL_USE_UART || defined(__DOXYGEN__) /*===========================================================================*/ /* Driver local definitions. */ /*===========================================================================*/ #define USART1_RX_DMA_CHANNEL \ STM32_DMA_GETCHANNEL(STM32_UART_USART1_RX_DMA_STREAM, \ STM32_USART1_RX_DMA_CHN) #define USART1_TX_DMA_CHANNEL \ STM32_DMA_GETCHANNEL(STM32_UART_USART1_TX_DMA_STREAM, \ STM32_USART1_TX_DMA_CHN) #define USART2_RX_DMA_CHANNEL \ STM32_DMA_GETCHANNEL(STM32_UART_USART2_RX_DMA_STREAM, \ STM32_USART2_RX_DMA_CHN) #define USART2_TX_DMA_CHANNEL \ STM32_DMA_GETCHANNEL(STM32_UART_USART2_TX_DMA_STREAM, \ STM32_USART2_TX_DMA_CHN) #define USART3_RX_DMA_CHANNEL \ STM32_DMA_GETCHANNEL(STM32_UART_USART3_RX_DMA_STREAM, \ STM32_USART3_RX_DMA_CHN) #define USART3_TX_DMA_CHANNEL \ STM32_DMA_GETCHANNEL(STM32_UART_USART3_TX_DMA_STREAM, \ STM32_USART3_TX_DMA_CHN) #define UART4_RX_DMA_CHANNEL \ STM32_DMA_GETCHANNEL(STM32_UART_UART4_RX_DMA_STREAM, \ STM32_UART4_RX_DMA_CHN) #define UART4_TX_DMA_CHANNEL \ STM32_DMA_GETCHANNEL(STM32_UART_UART4_TX_DMA_STREAM, \ STM32_UART4_TX_DMA_CHN) #define UART5_RX_DMA_CHANNEL \ STM32_DMA_GETCHANNEL(STM32_UART_UART5_RX_DMA_STREAM, \ STM32_UART5_RX_DMA_CHN) #define UART5_TX_DMA_CHANNEL \ STM32_DMA_GETCHANNEL(STM32_UART_UART5_TX_DMA_STREAM, \ STM32_UART5_TX_DMA_CHN) #define USART6_RX_DMA_CHANNEL \ STM32_DMA_GETCHANNEL(STM32_UART_USART6_RX_DMA_STREAM, \ STM32_USART6_RX_DMA_CHN) #define USART6_TX_DMA_CHANNEL \ STM32_DMA_GETCHANNEL(STM32_UART_USART6_TX_DMA_STREAM, \ STM32_USART6_TX_DMA_CHN) #define STM32_UART45_CR2_CHECK_MASK \ (USART_CR2_STOP_0 | USART_CR2_CLKEN | USART_CR2_CPOL | USART_CR2_CPHA | \ USART_CR2_LBCL) #define STM32_UART45_CR3_CHECK_MASK \ (USART_CR3_CTSIE | USART_CR3_CTSE | USART_CR3_RTSE | USART_CR3_SCEN | \ USART_CR3_NACK) /*===========================================================================*/ /* Driver exported variables. */ /*===========================================================================*/ /** @brief USART1 UART driver identifier.*/ #if STM32_UART_USE_USART1 || defined(__DOXYGEN__) UARTDriver UARTD1; #endif /** @brief USART2 UART driver identifier.*/ #if STM32_UART_USE_USART2 || defined(__DOXYGEN__) UARTDriver UARTD2; #endif /** @brief USART3 UART driver identifier.*/ #if STM32_UART_USE_USART3 || defined(__DOXYGEN__) UARTDriver UARTD3; #endif /** @brief UART4 UART driver identifier.*/ #if STM32_UART_USE_UART4 || defined(__DOXYGEN__) UARTDriver UARTD4; #endif /** @brief UART5 UART driver identifier.*/ #if STM32_UART_USE_UART5 || defined(__DOXYGEN__) UARTDriver UARTD5; #endif /** @brief USART6 UART driver identifier.*/ #if STM32_UART_USE_USART6 || defined(__DOXYGEN__) UARTDriver UARTD6; #endif /*===========================================================================*/ /* Driver local variables and types. */ /*===========================================================================*/ /*===========================================================================*/ /* Driver local functions. */ /*===========================================================================*/ /** * @brief Status bits translation. * * @param[in] sr USART SR register value * * @return The error flags. */ static uartflags_t translate_errors(uint16_t sr) { uartflags_t sts = 0; if (sr & USART_SR_ORE) sts |= UART_OVERRUN_ERROR; if (sr & USART_SR_PE) sts |= UART_PARITY_ERROR; if (sr & USART_SR_FE) sts |= UART_FRAMING_ERROR; if (sr & USART_SR_NE) sts |= UART_NOISE_ERROR; if (sr & USART_SR_LBD) sts |= UART_BREAK_DETECTED; return sts; } /** * @brief Puts the receiver in the UART_RX_IDLE state. * * @param[in] uartp pointer to the @p UARTDriver object */ static void uart_enter_rx_idle_loop(UARTDriver *uartp) { uint32_t mode; /* RX DMA channel preparation, if the char callback is defined then the TCIE interrupt is enabled too.*/ if (uartp->config->rxchar_cb == NULL) mode = STM32_DMA_CR_DIR_P2M | STM32_DMA_CR_CIRC; else mode = STM32_DMA_CR_DIR_P2M | STM32_DMA_CR_CIRC | STM32_DMA_CR_TCIE; dmaStreamSetMemory0(uartp->dmarx, &uartp->rxbuf); dmaStreamSetTransactionSize(uartp->dmarx, 1); dmaStreamSetMode(uartp->dmarx, uartp->dmamode | mode); dmaStreamEnable(uartp->dmarx); } /** * @brief USART de-initialization. * @details This function must be invoked with interrupts disabled. * * @param[in] uartp pointer to the @p UARTDriver object */ static void usart_stop(UARTDriver *uartp) { /* Stops RX and TX DMA channels.*/ dmaStreamDisable(uartp->dmarx); dmaStreamDisable(uartp->dmatx); /* Stops USART operations.*/ uartp->usart->CR1 = 0; uartp->usart->CR2 = 0; uartp->usart->CR3 = 0; } /** * @brief USART initialization. * @details This function must be invoked with interrupts disabled. * * @param[in] uartp pointer to the @p UARTDriver object */ static void usart_start(UARTDriver *uartp) { uint16_t cr1; USART_TypeDef *u = uartp->usart; /* Defensive programming, starting from a clean state.*/ usart_stop(uartp); /* Baud rate setting.*/ #if STM32_HAS_USART6 if ((uartp->usart == USART1) || (uartp->usart == USART6)) #else if (uartp->usart == USART1) #endif u->BRR = STM32_PCLK2 / uartp->config->speed; else u->BRR = STM32_PCLK1 / uartp->config->speed; /* Resetting eventual pending status flags.*/ (void)u->SR; /* SR reset step 1.*/ (void)u->DR; /* SR reset step 2.*/ u->SR = 0; /* Note that some bits are enforced because required for correct driver operations.*/ u->CR2 = uartp->config->cr2 | USART_CR2_LBDIE; u->CR3 = uartp->config->cr3 | USART_CR3_DMAT | USART_CR3_DMAR | USART_CR3_EIE; /* Mustn't ever set TCIE here - if done, it causes an immediate interrupt.*/ cr1 = USART_CR1_UE | USART_CR1_PEIE | USART_CR1_TE | USART_CR1_RE; u->CR1 = uartp->config->cr1 | cr1; /* Starting the receiver idle loop.*/ uart_enter_rx_idle_loop(uartp); } /** * @brief RX DMA common service routine. * * @param[in] uartp pointer to the @p UARTDriver object * @param[in] flags pre-shifted content of the ISR register */ static void uart_lld_serve_rx_end_irq(UARTDriver *uartp, uint32_t flags) { /* DMA errors handling.*/ #if defined(STM32_UART_DMA_ERROR_HOOK) if ((flags & (STM32_DMA_ISR_TEIF | STM32_DMA_ISR_DMEIF)) != 0) { STM32_UART_DMA_ERROR_HOOK(uartp); } #else (void)flags; #endif if (uartp->rxstate == UART_RX_IDLE) { /* Receiver in idle state, a callback is generated, if enabled, for each received character and then the driver stays in the same state.*/ _uart_rx_idle_code(uartp); } else { /* Receiver in active state, a callback is generated, if enabled, after a completed transfer.*/ dmaStreamDisable(uartp->dmarx); _uart_rx_complete_isr_code(uartp); } } /** * @brief TX DMA common service routine. * * @param[in] uartp pointer to the @p UARTDriver object * @param[in] flags pre-shifted content of the ISR register */ static void uart_lld_serve_tx_end_irq(UARTDriver *uartp, uint32_t flags) { /* DMA errors handling.*/ #if defined(STM32_UART_DMA_ERROR_HOOK) if ((flags & (STM32_DMA_ISR_TEIF | STM32_DMA_ISR_DMEIF)) != 0) { STM32_UART_DMA_ERROR_HOOK(uartp); } #else (void)flags; #endif dmaStreamDisable(uartp->dmatx); /* A callback is generated, if enabled, after a completed transfer.*/ _uart_tx1_isr_code(uartp); } /** * @brief USART common service routine. * * @param[in] uartp pointer to the @p UARTDriver object */ static void serve_usart_irq(UARTDriver *uartp) { uint16_t sr; USART_TypeDef *u = uartp->usart; uint32_t cr1 = u->CR1; sr = u->SR; /* SR reset step 1.*/ (void)u->DR; /* SR reset step 2.*/ if (sr & (USART_SR_LBD | USART_SR_ORE | USART_SR_NE | USART_SR_FE | USART_SR_PE)) { u->SR = ~USART_SR_LBD; _uart_rx_error_isr_code(uartp, translate_errors(sr)); } if ((sr & USART_SR_TC) && (cr1 & USART_CR1_TCIE)) { /* TC interrupt cleared and disabled.*/ u->SR = ~USART_SR_TC; u->CR1 = cr1 & ~USART_CR1_TCIE; /* End of transmission, a callback is generated.*/ _uart_tx2_isr_code(uartp); } } /*===========================================================================*/ /* Driver interrupt handlers. */ /*===========================================================================*/ #if STM32_UART_USE_USART1 || defined(__DOXYGEN__) #if !defined(STM32_USART1_HANDLER) #error "STM32_USART1_HANDLER not defined" #endif /** * @brief USART1 IRQ handler. * * @isr */ OSAL_IRQ_HANDLER(STM32_USART1_HANDLER) { OSAL_IRQ_PROLOGUE(); serve_usart_irq(&UARTD1); OSAL_IRQ_EPILOGUE(); } #endif /* STM32_UART_USE_USART1 */ #if STM32_UART_USE_USART2 || defined(__DOXYGEN__) #if !defined(STM32_USART2_HANDLER) #error "STM32_USART2_HANDLER not defined" #endif /** * @brief USART2 IRQ handler. * * @isr */ OSAL_IRQ_HANDLER(STM32_USART2_HANDLER) { OSAL_IRQ_PROLOGUE(); serve_usart_irq(&UARTD2); OSAL_IRQ_EPILOGUE(); } #endif /* STM32_UART_USE_USART2 */ #if STM32_UART_USE_USART3 || defined(__DOXYGEN__) #if !defined(STM32_USART3_HANDLER) #error "STM32_USART3_HANDLER not defined" #endif /** * @brief USART3 IRQ handler. * * @isr */ OSAL_IRQ_HANDLER(STM32_USART3_HANDLER) { OSAL_IRQ_PROLOGUE(); serve_usart_irq(&UARTD3); OSAL_IRQ_EPILOGUE(); } #endif /* STM32_UART_USE_USART3 */ #if STM32_UART_USE_UART4 || defined(__DOXYGEN__) #if !defined(STM32_UART4_HANDLER) #error "STM32_UART4_HANDLER not defined" #endif /** * @brief UART4 IRQ handler. * * @isr */ OSAL_IRQ_HANDLER(STM32_UART4_HANDLER) { OSAL_IRQ_PROLOGUE(); serve_usart_irq(&UARTD4); OSAL_IRQ_EPILOGUE(); } #endif /* STM32_UART_USE_UART4 */ #if STM32_UART_USE_UART5 || defined(__DOXYGEN__) #if !defined(STM32_UART5_HANDLER) #error "STM32_UART5_HANDLER not defined" #endif /** * @brief UART5 IRQ handler. * * @isr */ OSAL_IRQ_HANDLER(STM32_UART5_HANDLER) { OSAL_IRQ_PROLOGUE(); serve_usart_irq(&UARTD5); OSAL_IRQ_EPILOGUE(); } #endif /* STM32_UART_USE_UART5 */ #if STM32_UART_USE_USART6 || defined(__DOXYGEN__) #if !defined(STM32_USART6_HANDLER) #error "STM32_USART6_HANDLER not defined" #endif /** * @brief USART6 IRQ handler. * * @isr */ OSAL_IRQ_HANDLER(STM32_USART6_HANDLER) { OSAL_IRQ_PROLOGUE(); serve_usart_irq(&UARTD6); OSAL_IRQ_EPILOGUE(); } #endif /* STM32_UART_USE_USART6 */ /*===========================================================================*/ /* Driver exported functions. */ /*===========================================================================*/ /** * @brief Low level UART driver initialization. * * @notapi */ void uart_lld_init(void) { #if STM32_UART_USE_USART1 uartObjectInit(&UARTD1); UARTD1.usart = USART1; UARTD1.dmamode = STM32_DMA_CR_DMEIE | STM32_DMA_CR_TEIE; UARTD1.dmarx = STM32_DMA_STREAM(STM32_UART_USART1_RX_DMA_STREAM); UARTD1.dmatx = STM32_DMA_STREAM(STM32_UART_USART1_TX_DMA_STREAM); #endif #if STM32_UART_USE_USART2 uartObjectInit(&UARTD2); UARTD2.usart = USART2; UARTD2.dmamode = STM32_DMA_CR_DMEIE | STM32_DMA_CR_TEIE; UARTD2.dmarx = STM32_DMA_STREAM(STM32_UART_USART2_RX_DMA_STREAM); UARTD2.dmatx = STM32_DMA_STREAM(STM32_UART_USART2_TX_DMA_STREAM); #endif #if STM32_UART_USE_USART3 uartObjectInit(&UARTD3); UARTD3.usart = USART3; UARTD3.dmamode = STM32_DMA_CR_DMEIE | STM32_DMA_CR_TEIE; UARTD3.dmarx = STM32_DMA_STREAM(STM32_UART_USART3_RX_DMA_STREAM); UARTD3.dmatx = STM32_DMA_STREAM(STM32_UART_USART3_TX_DMA_STREAM); #endif #if STM32_UART_USE_UART4 uartObjectInit(&UARTD4); UARTD4.usart = UART4; UARTD4.dmamode = STM32_DMA_CR_DMEIE | STM32_DMA_CR_TEIE; UARTD4.dmarx = STM32_DMA_STREAM(STM32_UART_UART4_RX_DMA_STREAM); UARTD4.dmatx = STM32_DMA_STREAM(STM32_UART_UART4_TX_DMA_STREAM); #endif #if STM32_UART_USE_UART5 uartObjectInit(&UARTD5); UARTD5.usart = UART5; UARTD5.dmamode = STM32_DMA_CR_DMEIE | STM32_DMA_CR_TEIE; UARTD5.dmarx = STM32_DMA_STREAM(STM32_UART_UART5_RX_DMA_STREAM); UARTD5.dmatx = STM32_DMA_STREAM(STM32_UART_UART5_TX_DMA_STREAM); #endif #if STM32_UART_USE_USART6 uartObjectInit(&UARTD6); UARTD6.usart = USART6; UARTD6.dmarx = STM32_DMA_STREAM(STM32_UART_USART6_RX_DMA_STREAM); UARTD6.dmatx = STM32_DMA_STREAM(STM32_UART_USART6_TX_DMA_STREAM); #endif } /** * @brief Configures and activates the UART peripheral. * * @param[in] uartp pointer to the @p UARTDriver object * * @notapi */ void uart_lld_start(UARTDriver *uartp) { if (uartp->state == UART_STOP) { #if STM32_UART_USE_USART1 if (&UARTD1 == uartp) { bool b; b = dmaStreamAllocate(uartp->dmarx, STM32_UART_USART1_IRQ_PRIORITY, (stm32_dmaisr_t)uart_lld_serve_rx_end_irq, (void *)uartp); osalDbgAssert(!b, "stream already allocated"); b = dmaStreamAllocate(uartp->dmatx, STM32_UART_USART1_IRQ_PRIORITY, (stm32_dmaisr_t)uart_lld_serve_tx_end_irq, (void *)uartp); osalDbgAssert(!b, "stream already allocated"); rccEnableUSART1(FALSE); nvicEnableVector(STM32_USART1_NUMBER, STM32_UART_USART1_IRQ_PRIORITY); uartp->dmamode |= STM32_DMA_CR_CHSEL(USART1_RX_DMA_CHANNEL) | STM32_DMA_CR_PL(STM32_UART_USART1_DMA_PRIORITY); } #endif #if STM32_UART_USE_USART2 if (&UARTD2 == uartp) { bool b; b = dmaStreamAllocate(uartp->dmarx, STM32_UART_USART2_IRQ_PRIORITY, (stm32_dmaisr_t)uart_lld_serve_rx_end_irq, (void *)uartp); osalDbgAssert(!b, "stream already allocated"); b = dmaStreamAllocate(uartp->dmatx, STM32_UART_USART2_IRQ_PRIORITY, (stm32_dmaisr_t)uart_lld_serve_tx_end_irq, (void *)uartp); osalDbgAssert(!b, "stream already allocated"); rccEnableUSART2(FALSE); nvicEnableVector(STM32_USART2_NUMBER, STM32_UART_USART2_IRQ_PRIORITY); uartp->dmamode |= STM32_DMA_CR_CHSEL(USART2_RX_DMA_CHANNEL) | STM32_DMA_CR_PL(STM32_UART_USART2_DMA_PRIORITY); } #endif #if STM32_UART_USE_USART3 if (&UARTD3 == uartp) { bool b; b = dmaStreamAllocate(uartp->dmarx, STM32_UART_USART3_IRQ_PRIORITY, (stm32_dmaisr_t)uart_lld_serve_rx_end_irq, (void *)uartp); osalDbgAssert(!b, "stream already allocated"); b = dmaStreamAllocate(uartp->dmatx, STM32_UART_USART3_IRQ_PRIORITY, (stm32_dmaisr_t)uart_lld_serve_tx_end_irq, (void *)uartp); osalDbgAssert(!b, "stream already allocated"); rccEnableUSART3(FALSE); nvicEnableVector(STM32_USART3_NUMBER, STM32_UART_USART3_IRQ_PRIORITY); uartp->dmamode |= STM32_DMA_CR_CHSEL(USART3_RX_DMA_CHANNEL) | STM32_DMA_CR_PL(STM32_UART_USART3_DMA_PRIORITY); } #endif #if STM32_UART_USE_UART4 if (&UARTD4 == uartp) { bool b; chDbgAssert((uartp->config->cr2 & STM32_UART45_CR2_CHECK_MASK) == 0, "specified invalid bits in UART4 CR2 register settings"); chDbgAssert((uartp->config->cr3 & STM32_UART45_CR3_CHECK_MASK) == 0, "specified invalid bits in UART4 CR3 register settings"); b = dmaStreamAllocate(uartp->dmarx, STM32_UART_UART4_IRQ_PRIORITY, (stm32_dmaisr_t)uart_lld_serve_rx_end_irq, (void *)uartp); osalDbgAssert(!b, "stream already allocated"); b = dmaStreamAllocate(uartp->dmatx, STM32_UART_UART4_IRQ_PRIORITY, (stm32_dmaisr_t)uart_lld_serve_tx_end_irq, (void *)uartp); osalDbgAssert(!b, "stream already allocated"); rccEnableUART4(FALSE); nvicEnableVector(STM32_UART4_NUMBER, STM32_UART_UART4_IRQ_PRIORITY); uartp->dmamode |= STM32_DMA_CR_CHSEL(UART4_RX_DMA_CHANNEL) | STM32_DMA_CR_PL(STM32_UART_UART4_DMA_PRIORITY); } #endif #if STM32_UART_USE_UART5 if (&UARTD5 == uartp) { bool b; chDbgAssert((uartp->config->cr2 & STM32_UART45_CR2_CHECK_MASK) == 0, "specified invalid bits in UART5 CR2 register settings"); chDbgAssert((uartp->config->cr3 & STM32_UART45_CR3_CHECK_MASK) == 0, "specified invalid bits in UART5 CR3 register settings"); b = dmaStreamAllocate(uartp->dmarx, STM32_UART_UART5_IRQ_PRIORITY, (stm32_dmaisr_t)uart_lld_serve_rx_end_irq, (void *)uartp); osalDbgAssert(!b, "stream already allocated"); b = dmaStreamAllocate(uartp->dmatx, STM32_UART_UART5_IRQ_PRIORITY, (stm32_dmaisr_t)uart_lld_serve_tx_end_irq, (void *)uartp); osalDbgAssert(!b, "stream already allocated"); rccEnableUART5(FALSE); nvicEnableVector(STM32_UART5_NUMBER, STM32_UART_UART5_IRQ_PRIORITY); uartp->dmamode |= STM32_DMA_CR_CHSEL(UART5_RX_DMA_CHANNEL) | STM32_DMA_CR_PL(STM32_UART_UART5_DMA_PRIORITY); } #endif #if STM32_UART_USE_USART6 if (&UARTD6 == uartp) { bool b; b = dmaStreamAllocate(uartp->dmarx, STM32_UART_USART6_IRQ_PRIORITY, (stm32_dmaisr_t)uart_lld_serve_rx_end_irq, (void *)uartp); osalDbgAssert(!b, "stream already allocated"); b = dmaStreamAllocate(uartp->dmatx, STM32_UART_USART6_IRQ_PRIORITY, (stm32_dmaisr_t)uart_lld_serve_tx_end_irq, (void *)uartp); osalDbgAssert(!b, "stream already allocated"); rccEnableUSART6(FALSE); nvicEnableVector(STM32_USART6_NUMBER, STM32_UART_USART6_IRQ_PRIORITY); uartp->dmamode |= STM32_DMA_CR_CHSEL(USART6_RX_DMA_CHANNEL) | STM32_DMA_CR_PL(STM32_UART_USART6_DMA_PRIORITY); } #endif /* Static DMA setup, the transfer size depends on the USART settings, it is 16 bits if M=1 and PCE=0 else it is 8 bits.*/ if ((uartp->config->cr1 & (USART_CR1_M | USART_CR1_PCE)) == USART_CR1_M) uartp->dmamode |= STM32_DMA_CR_PSIZE_HWORD | STM32_DMA_CR_MSIZE_HWORD; dmaStreamSetPeripheral(uartp->dmarx, &uartp->usart->DR); dmaStreamSetPeripheral(uartp->dmatx, &uartp->usart->DR); uartp->rxbuf = 0; } uartp->rxstate = UART_RX_IDLE; uartp->txstate = UART_TX_IDLE; usart_start(uartp); } /** * @brief Deactivates the UART peripheral. * * @param[in] uartp pointer to the @p UARTDriver object * * @notapi */ void uart_lld_stop(UARTDriver *uartp) { if (uartp->state == UART_READY) { usart_stop(uartp); dmaStreamRelease(uartp->dmarx); dmaStreamRelease(uartp->dmatx); #if STM32_UART_USE_USART1 if (&UARTD1 == uartp) { nvicDisableVector(STM32_USART1_NUMBER); rccDisableUSART1(FALSE); return; } #endif #if STM32_UART_USE_USART2 if (&UARTD2 == uartp) { nvicDisableVector(STM32_USART2_NUMBER); rccDisableUSART2(FALSE); return; } #endif #if STM32_UART_USE_USART3 if (&UARTD3 == uartp) { nvicDisableVector(STM32_USART3_NUMBER); rccDisableUSART3(FALSE); return; } #endif #if STM32_UART_USE_UART4 if (&UARTD4 == uartp) { nvicDisableVector(STM32_UART4_NUMBER); rccDisableUART4(FALSE); return; } #endif #if STM32_UART_USE_UART5 if (&UARTD5 == uartp) { nvicDisableVector(STM32_UART5_NUMBER); rccDisableUART5(FALSE); return; } #endif #if STM32_UART_USE_USART6 if (&UARTD6 == uartp) { nvicDisableVector(STM32_USART6_NUMBER); rccDisableUSART6(FALSE); return; } #endif } } /** * @brief Starts a transmission on the UART peripheral. * @note The buffers are organized as uint8_t arrays for data sizes below * or equal to 8 bits else it is organized as uint16_t arrays. * * @param[in] uartp pointer to the @p UARTDriver object * @param[in] n number of data frames to send * @param[in] txbuf the pointer to the transmit buffer * * @notapi */ void uart_lld_start_send(UARTDriver *uartp, size_t n, const void *txbuf) { /* TX DMA channel preparation.*/ dmaStreamSetMemory0(uartp->dmatx, txbuf); dmaStreamSetTransactionSize(uartp->dmatx, n); dmaStreamSetMode(uartp->dmatx, uartp->dmamode | STM32_DMA_CR_DIR_M2P | STM32_DMA_CR_MINC | STM32_DMA_CR_TCIE); /* Only enable TC interrupt if there's a callback attached to it. Also we need to clear TC flag which could be set before. */ if (uartp->config->txend2_cb != NULL) { uartp->usart->SR = ~USART_SR_TC; uartp->usart->CR1 |= USART_CR1_TCIE; } /* Starting transfer.*/ dmaStreamEnable(uartp->dmatx); } /** * @brief Stops any ongoing transmission. * @note Stopping a transmission also suppresses the transmission callbacks. * * @param[in] uartp pointer to the @p UARTDriver object * * @return The number of data frames not transmitted by the * stopped transmit operation. * * @notapi */ size_t uart_lld_stop_send(UARTDriver *uartp) { dmaStreamDisable(uartp->dmatx); return dmaStreamGetTransactionSize(uartp->dmatx); } /** * @brief Starts a receive operation on the UART peripheral. * @note The buffers are organized as uint8_t arrays for data sizes below * or equal to 8 bits else it is organized as uint16_t arrays. * * @param[in] uartp pointer to the @p UARTDriver object * @param[in] n number of data frames to send * @param[out] rxbuf the pointer to the receive buffer * * @notapi */ void uart_lld_start_receive(UARTDriver *uartp, size_t n, void *rxbuf) { /* Stopping previous activity (idle state).*/ dmaStreamDisable(uartp->dmarx); /* RX DMA channel preparation.*/ dmaStreamSetMemory0(uartp->dmarx, rxbuf); dmaStreamSetTransactionSize(uartp->dmarx, n); dmaStreamSetMode(uartp->dmarx, uartp->dmamode | STM32_DMA_CR_DIR_P2M | STM32_DMA_CR_MINC | STM32_DMA_CR_TCIE); /* Starting transfer.*/ dmaStreamEnable(uartp->dmarx); } /** * @brief Stops any ongoing receive operation. * @note Stopping a receive operation also suppresses the receive callbacks. * * @param[in] uartp pointer to the @p UARTDriver object * * @return The number of data frames not received by the * stopped receive operation. * * @notapi */ size_t uart_lld_stop_receive(UARTDriver *uartp) { size_t n; dmaStreamDisable(uartp->dmarx); n = dmaStreamGetTransactionSize(uartp->dmarx); uart_enter_rx_idle_loop(uartp); return n; } #endif /* HAL_USE_UART */ /** @} */