/* ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010, 2011,2012 Giovanni Di Sirio. This file is part of ChibiOS/RT. ChibiOS/RT is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3 of the License, or (at your option) any later version. ChibiOS/RT is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . */ #ifndef _BOARD_H_ #define _BOARD_H_ /* * Setup for the STMicroelectronics STM3210C-EVAL evaluation board. */ /* * Board identifier. */ #define BOARD_OLIMEX_STM32_P107 #define BOARD_NAME "Olimex STM32-P107" /* * Board frequencies. */ #define STM32_LSECLK 32768 #define STM32_HSECLK 25000000 /* * MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h. */ #define STM32F10X_CL /* * Ethernet PHY type. */ #define BOARD_PHY_ID MII_STE101P_ID /* * IO pins assignments. */ #define GPIOA_SWITCH_WKUP 0 #define GPIOC_LED_STATUS1 6 #define GPIOC_LED_STATUS2 7 #define GPIOC_SWITCH_TAMPER 13 /* * I/O ports initial setup, this configuration is established soon after reset * in the initialization code. * * The digits have the following meaning: * 0 - Analog input. * 1 - Push Pull output 10MHz. * 2 - Push Pull output 2MHz. * 3 - Push Pull output 50MHz. * 4 - Digital input. * 5 - Open Drain output 10MHz. * 6 - Open Drain output 2MHz. * 7 - Open Drain output 50MHz. * 8 - Digital input with PullUp or PullDown resistor depending on ODR. * 9 - Alternate Push Pull output 10MHz. * A - Alternate Push Pull output 2MHz. * B - Alternate Push Pull output 50MHz. * C - Reserved. * D - Alternate Open Drain output 10MHz. * E - Alternate Open Drain output 2MHz. * F - Alternate Open Drain output 50MHz. * Please refer to the STM32 Reference Manual for details. */ /* * Port A setup. * Everything input with pull-up except: * PA0 - Normal input (WKUP BUTTON). * PA1 - Normal input (ETH_RMII_REF_CLK). * PA2 - Alternate output (ETH_RMII_MDIO). * PA3 - Input with PU (unconnected). * PA4 - Push Pull output (CS_MMC). * PA5 - Input with PU (unconnected). * PA6 - Input with PU (unconnected). * PA7 - Normal input (ETH_RMII_CRS_DV). * PA8 - Alternate output (MCO). * PA9 - Normal input (OTG_VBUS). * PA10 - Normal input (OTG_ID). * PA11 - Normal input (OTG_DM). * PA12 - Normal input (OTG_DP). * PA13 - Normal input (TMS). * PA14 - Normal input (TCK). * PA15 - Normal input (TDI). */ #define VAL_GPIOACRL 0x48838B44 /* PA7...PA0 */ #define VAL_GPIOACRH 0x4444444B /* PA15...PA8 */ #define VAL_GPIOAODR 0xFFFFFFFF /* * Port B setup: * PB0 - Input with PU (unconnected). * PB1 - Input with PU (unconnected). * PB2 - Normal input (BOOT1). * PB3 - Normal input (TDO). * PB4 - Normal input (TRST). * PB5 - Input with PU (unconnected). * PB6 - Input with PU (unconnected). * PB7 - Input with PU (unconnected). * PB8 - Alternate O.D. (I2C1 SCL, remapped). * PB9 - Alternate O.D. (I2C1 SDA, remapped). * PB10 - Input with PU (unconnected). * PB11 - Alternate output (ETH_RMII_TX_EN). * PB12 - Alternate output (ETH_RMII_TXD0). * PB13 - Alternate output (ETH_RMII_TXD1). * PB14 - Input with PU (unconnected). * PB15 - Push Pull output (CS_UEXT). */ #define VAL_GPIOBCRL 0x88844488 /* PB7...PB0 */ #define VAL_GPIOBCRH 0x38BBB8FF /* PB15...PB8 */ #define VAL_GPIOBODR 0xFFFFFFFF /* * Port C setup: * PC0 - Input with PU (unconnected). * PC1 - Alternate output (ETH_MDC). * PC2 - Input with PU (unconnected). * PC3 - Input with PU (unconnected). * PC4 - Normal input (ETH_RMII_RXD0). * PC5 - Normal input (ETH_RMII_RXD1). * PC6 - Push Pull output (STAT1 green LED). * PC7 - Push Pull output (STAT2 yellow LED). * PC8 - Input with PU (unconnected). * PC9 - Input with PU (unconnected). * PC10 - Alternate output (SPI3 SCK). * PC11 - Input with PU (SPI3 MISO). * PC12 - Alternate output (SPI3 MOSI). * PC13 - Normal input (TAMPER). * PC14 - Normal input (OSC32 IN). * PC15 - Normal input (OSC32 OUT). */ #define VAL_GPIOCCRL 0x334488B8 /* PC7...PC0 */ #define VAL_GPIOCCRH 0x444B8B88 /* PC15...PC8 */ #define VAL_GPIOCODR 0xFFFFFF3F /* * Port D setup: * PD0 - Input with PU (unconnected). * PD1 - Input with PU (unconnected). * PD2 - Input with PU (unconnected). * PD3 - Input with PU (unconnected). * PD4 - Input with PU (unconnected). * PD5 - Alternate output (USART2 TX, UEXT). * PD6 - Input with PU (USART2 RX, UEXT). * PD7 - Push Pull output (USB_VBUSON). * PD8 - Alternate output (USART2 TX, remapped). * PD9 - Normal input (USART2 RX, remapped). * PD10 - Input with PU (unconnected). * PD11 - Normal input (USART2 CTS, remapped). * PD12 - Alternate output (USART2 RTS, remapped). * PD13 - Input with PU (unconnected). * PD14 - Input with PU (unconnected). * PD15 - Input with PU (unconnected). */ #define VAL_GPIODCRL 0x38B88888 /* PD7...PD0 */ #define VAL_GPIODCRH 0x888B484B /* PD15...PD8 */ #define VAL_GPIODODR 0xFFFFFFFF /* * Port E setup. * Everything input with pull-up except: * PE14 - Normal input (ETH_RMII_MDINT). * PE15 - Normal input (USB_FAULT). */ #define VAL_GPIOECRL 0x88888888 /* PE7...PE0 */ #define VAL_GPIOECRH 0x44888888 /* PE15...PE8 */ #define VAL_GPIOEODR 0xFFFFFFFF #if !defined(_FROM_ASM_) #ifdef __cplusplus extern "C" { #endif void boardInit(void); #ifdef __cplusplus } #endif #endif /* _FROM_ASM_ */ #endif /* _BOARD_H_ */