/* ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010, 2011 Giovanni Di Sirio. This file is part of ChibiOS/RT. ChibiOS/RT is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3 of the License, or (at your option) any later version. ChibiOS/RT is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . */ /** * @file STM32/GPIOv2/pal_lld.h * @brief STM32L1xx/STM32F2xx GPIO low level driver header. * * @addtogroup PAL * @{ */ #ifndef _PAL_LLD_H_ #define _PAL_LLD_H_ #if HAL_USE_PAL || defined(__DOXYGEN__) /*===========================================================================*/ /* Unsupported modes and specific modes */ /*===========================================================================*/ #undef PAL_MODE_RESET #undef PAL_MODE_UNCONNECTED #undef PAL_MODE_INPUT #undef PAL_MODE_INPUT_PULLUP #undef PAL_MODE_INPUT_PULLDOWN #undef PAL_MODE_INPUT_ANALOG #undef PAL_MODE_OUTPUT_PUSHPULL #undef PAL_MODE_OUTPUT_OPENDRAIN #define PAL_STM32_MODE_MASK (3 << 0) #define PAL_STM32_MODE_INPUT (0 << 0) #define PAL_STM32_MODE_OUTPUT (1 << 0) #define PAL_STM32_MODE_ALTERNATE (2 << 0) #define PAL_STM32_MODE_ANALOG (3 << 0) #define PAL_STM32_OTYPE_MASK (1 << 2) #define PAL_STM32_OTYPE_PUSHPULL (0 << 2) #define PAL_STM32_OTYPE_OPENDRAIN (1 << 2) #define PAL_STM32_OSPEED_MASK (3 << 3) #define PAL_STM32_OSPEED_LOWEST (0 << 3) #define PAL_STM32_OSPEED_MID1 (1 << 3) #define PAL_STM32_OSPEED_MID2 (2 << 3) #define PAL_STM32_OSPEED_HIGHEST (3 << 3) #define PAL_STM32_PUDR_MASK (3 << 5) #define PAL_STM32_PUDR_FLOATING (0 << 5) #define PAL_STM32_PUDR_PULLUP (1 << 5) #define PAL_STM32_PUDR_PULLDOWN (2 << 5) #define PAL_STM32_ALTERNATE_MASK (15 << 7) #define PAL_STM32_ALTERNATE(n) ((n) << 7) /** * @brief This mode is implemented as input. */ #define PAL_MODE_RESET PAL_STM32_MODE_INPUT /** * @brief This mode is implemented as output. */ #define PAL_MODE_UNCONNECTED PAL_STM32_MODE_OUTPUT /** * @brief Regular input high-Z pad. */ #define PAL_MODE_INPUT PAL_STM32_MODE_INPUT /** * @brief Input pad with weak pull up resistor. */ #define PAL_MODE_INPUT_PULLUP (PAL_STM32_MODE_INPUT | \ PAL_STM32_PUDR_PULLUP) /** * @brief Input pad with weak pull down resistor. */ #define PAL_MODE_INPUT_PULLDOWN (PAL_STM32_MODE_INPUT | \ PAL_STM32_PUDR_PULLDOWN) /** * @brief Analog input mode. */ #define PAL_MODE_INPUT_ANALOG PAL_STM32_MODE_ANALOG /** * @brief Push-pull output pad. */ #define PAL_MODE_OUTPUT_PUSHPULL (PAL_STM32_MODE_OUTPUT | \ PAL_STM32_OTYPE_PUSHPULL) /** * @brief Open-drain output pad. */ #define PAL_MODE_OUTPUT_OPENDRAIN (PAL_STM32_MODE_OUTPUT | \ PAL_STM32_OTYPE_OPENDRAIN) /** * @brief Alternate function. * * @param[in] n alternate function selector */ #define PAL_MODE_ALTERNATE(n) (PAL_STM32_MODE_ALTERNATE | \ PAL_STM32_ALTERNATE(n)) /*===========================================================================*/ /* I/O Ports Types and constants. */ /*===========================================================================*/ /** * @brief STM32 GPIO registers block. */ typedef struct { volatile uint32_t MODER; volatile uint32_t OTYPER; volatile uint32_t OSPEEDR; volatile uint32_t PUPDR; volatile uint32_t IDR; volatile uint32_t ODR; volatile union { uint32_t W; struct { uint16_t set; uint16_t clear; } H; } BSRR; volatile uint32_t LCKR; volatile uint32_t AFRL; volatile uint32_t AFRH; } GPIO_TypeDef; /** * @brief GPIO port setup info. */ typedef struct { /** Initial value for MODER register.*/ uint32_t moder; /** Initial value for OTYPER register.*/ uint32_t otyper; /** Initial value for OSPEEDR register.*/ uint32_t ospeedr; /** Initial value for PUPDR register.*/ uint32_t pupdr; /** Initial value for ODR register.*/ uint32_t odr; /** Initial value for AFRL register.*/ uint32_t afrl; /** Initial value for AFRH register.*/ uint32_t afrh; } stm32_gpio_setup_t; /** * @brief STM32 GPIO static initializer. * @details An instance of this structure must be passed to @p palInit() at * system startup time in order to initialize the digital I/O * subsystem. This represents only the initial setup, specific pads * or whole ports can be reprogrammed at later time. */ typedef struct { /** @brief Port A setup data.*/ stm32_gpio_setup_t PAData; /** @brief Port B setup data.*/ stm32_gpio_setup_t PBData; /** @brief Port C setup data.*/ stm32_gpio_setup_t PCData; /** @brief Port D setup data.*/ stm32_gpio_setup_t PDData; #if STM32_HAS_GPIOE /** @brief Port E setup data.*/ stm32_gpio_setup_t PEData; #endif #if STM32_HAS_GPIOF /** @brief Port F setup data.*/ stm32_gpio_setup_t PFData; #endif #if STM32_HAS_GPIOG /** @brief Port G setup data.*/ stm32_gpio_setup_t PGData; #endif #if STM32_HAS_GPIOH /** @brief Port H setup data.*/ stm32_gpio_setup_t PHData; #endif #if STM32_HAS_GPIOI /** @brief Port I setup data.*/ stm32_gpio_setup_t PIData; #endif } PALConfig; /** * @brief Width, in bits, of an I/O port. */ #define PAL_IOPORTS_WIDTH 16 /** * @brief Whole port mask. * @details This macro specifies all the valid bits into a port. */ #define PAL_WHOLE_PORT ((ioportmask_t)0xFFFF) /** * @brief Digital I/O port sized unsigned type. */ typedef uint32_t ioportmask_t; /** * @brief Digital I/O modes. */ typedef uint32_t iomode_t; /** * @brief Port Identifier. * @details This type can be a scalar or some kind of pointer, do not make * any assumption about it, use the provided macros when populating * variables of this type. */ typedef GPIO_TypeDef * ioportid_t; /*===========================================================================*/ /* I/O Ports Identifiers. */ /* The low level driver wraps the definitions already present in the STM32 */ /* firmware library. */ /*===========================================================================*/ /** * @brief GPIO port A identifier. */ #if STM32_HAS_GPIOA || defined(__DOXYGEN__) #define IOPORT1 GPIOA #endif /** * @brief GPIO port B identifier. */ #if STM32_HAS_GPIOB || defined(__DOXYGEN__) #define IOPORT2 GPIOB #endif /** * @brief GPIO port C identifier. */ #if STM32_HAS_GPIOC || defined(__DOXYGEN__) #define IOPORT3 GPIOC #endif /** * @brief GPIO port D identifier. */ #if STM32_HAS_GPIOD || defined(__DOXYGEN__) #define IOPORT4 GPIOD #endif /** * @brief GPIO port E identifier. */ #if STM32_HAS_GPIOE || defined(__DOXYGEN__) #define IOPORT5 GPIOE #endif /** * @brief GPIO port F identifier. */ #if STM32_HAS_GPIOF || defined(__DOXYGEN__) #define IOPORT6 GPIOF #endif /** * @brief GPIO port G identifier. */ #if STM32_HAS_GPIOG || defined(__DOXYGEN__) #define IOPORT7 GPIOG #endif /** * @brief GPIO port H identifier. */ #if STM32_HAS_GPIOH || defined(__DOXYGEN__) #define IOPORT8 GPIOH #endif /** * @brief GPIO port I identifier. */ #if STM32_HAS_GPIOI || defined(__DOXYGEN__) #define IOPORT9 GPIOI #endif /*===========================================================================*/ /* Implementation, some of the following macros could be implemented as */ /* functions, please put them in a file named ioports_lld.c if so. */ /*===========================================================================*/ /** * @brief GPIO ports subsystem initialization. * * @notapi */ #define pal_lld_init(config) _pal_lld_init(config) /** * @brief Reads an I/O port. * @details This function is implemented by reading the GPIO IDR register, the * implementation has no side effects. * @note This function is not meant to be invoked directly by the application * code. * * @param[in] port the port identifier * @return The port bits. * * @notapi */ #define pal_lld_readport(port) ((port)->IDR) /** * @brief Reads the output latch. * @details This function is implemented by reading the GPIO ODR register, the * implementation has no side effects. * @note This function is not meant to be invoked directly by the application * code. * * @param[in] port the port identifier * @return The latched logical states. * * @notapi */ #define pal_lld_readlatch(port) ((port)->ODR) /** * @brief Writes on a I/O port. * @details This function is implemented by writing the GPIO ODR register, the * implementation has no side effects. * @note Writing on pads programmed as pull-up or pull-down has the side * effect to modify the resistor setting because the output latched * data is used for the resistor selection. * * @param[in] port the port identifier * @param[in] bits the bits to be written on the specified port * * @notapi */ #define pal_lld_writeport(port, bits) ((port)->ODR = (bits)) /** * @brief Sets a bits mask on a I/O port. * @details This function is implemented by writing the GPIO BSRR register, the * implementation has no side effects. * @note Writing on pads programmed as pull-up or pull-down has the side * effect to modify the resistor setting because the output latched * data is used for the resistor selection. * * @param[in] port the port identifier * @param[in] bits the bits to be ORed on the specified port * * @notapi */ #define pal_lld_setport(port, bits) ((port)->BSRR.H.set = (uint16_t)(bits)) /** * @brief Clears a bits mask on a I/O port. * @details This function is implemented by writing the GPIO BSRR register, the * implementation has no side effects. * @note Writing on pads programmed as pull-up or pull-down has the side * effect to modify the resistor setting because the output latched * data is used for the resistor selection. * * @param[in] port the port identifier * @param[in] bits the bits to be cleared on the specified port * * @notapi */ #define pal_lld_clearport(port, bits) ((port)->BSRR.H.clear = (uint16_t)(bits)) /** * @brief Writes a group of bits. * @details This function is implemented by writing the GPIO BSRR register, the * implementation has no side effects. * @note Writing on pads programmed as pull-up or pull-down has the side * effect to modify the resistor setting because the output latched * data is used for the resistor selection. * * @param[in] port the port identifier * @param[in] mask the group mask * @param[in] offset the group bit offset within the port * @param[in] bits the bits to be written. Values exceeding the group * width are masked. * * @notapi */ #define pal_lld_writegroup(port, mask, offset, bits) \ ((port)->BSRR.W = ((~(bits) & (mask)) << (16 + (offset))) | \ (((bits) & (mask)) << (offset))) /** * @brief Pads group mode setup. * @details This function programs a pads group belonging to the same port * with the specified mode. * @note Writing on pads programmed as pull-up or pull-down has the side * effect to modify the resistor setting because the output latched * data is used for the resistor selection. * * @param[in] port the port identifier * @param[in] mask the group mask * @param[in] mode the mode * * @notapi */ #define pal_lld_setgroupmode(port, mask, mode) \ _pal_lld_setgroupmode(port, mask, mode) /** * @brief Writes a logical state on an output pad. * @note Writing on pads programmed as pull-up or pull-down has the side * effect to modify the resistor setting because the output latched * data is used for the resistor selection. * * @param[in] port the port identifier * @param[in] pad the pad number within the port * @param[in] bit logical value, the value must be @p PAL_LOW or * @p PAL_HIGH * * @notapi */ #define pal_lld_writepad(port, pad, bit) pal_lld_writegroup(port, 1, pad, bit) extern const PALConfig pal_default_config; #ifdef __cplusplus extern "C" { #endif void _pal_lld_init(const PALConfig *config); void _pal_lld_setgroupmode(ioportid_t port, ioportmask_t mask, iomode_t mode); #ifdef __cplusplus } #endif #endif /* HAL_USE_PAL */ #endif /* _PAL_LLD_H_ */ /** @} */