/* ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010, 2011 Giovanni Di Sirio. This file is part of ChibiOS/RT. ChibiOS/RT is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3 of the License, or (at your option) any later version. ChibiOS/RT is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . */ #ifndef _BOARD_H_ #define _BOARD_H_ /* * Setup for STMicroelectronics STM32F4-Discovery board. */ /* * Board identifier. */ #define BOARD_ST_STM32F4_DISCOVERY #define BOARD_NAME "ST STM32F4-Discovery" /* * Board frequencies. * NOTE: The LSE crystal is not fitted by default on the board. */ #define STM32_LSECLK 0 #define STM32_HSECLK 8000000 /* * MCU type as defined in the ST header file stm32l1xx.h. */ #define STM32F4XX /* * IO pins assignments. */ #define GPIOA_BUTTON 0 #define GPIOA_LRCK 4 #define GPIOA_SPC 5 #define GPIOA_SDO 6 #define GPIOA_SDA_SDI_SDO 7 #define GPIOA_VBUS_FS 9 #define GPIOA_OTG_FS_ID 10 #define GPIOA_OTG_FS_DM 11 #define GPIOA_OTG_FS_DP 12 #define GPIOA_SWDIO 13 #define GPIOA_SWCLK 14 #define GPIOB_SWO 3 #define GPIOB_SCL 6 #define GPIOB_SDA 9 #define GPIOB_SCK 10 #define GPIOC_OTG_FS_POWER_ON 0 #define GPIOC_DOUT 3 #define GPIOC_MCLK 7 #define GPIOC_SCLK 10 #define GPIOC_SDIN 12 #define GPIOD_RESET 4 #define GPIOD_OVER_CURRENT 5 #define GPIOD_LED4 12 /* Green LED. */ #define GPIOD_LED3 13 /* Orange LED. */ #define GPIOD_LED5 14 /* Red LED. */ #define GPIOD_LED6 15 /* Blue LED. */ #define GPIOE_INT1 0 #define GPIOE_INT2 1 #define GPIOE_CS_SPI 3 #define GPIOH_OSC_IN 0 #define GPIOH_OSC_OUT 1 /* * I/O ports initial setup, this configuration is established soon after reset * in the initialization code. * Please refer to the STM32 Reference Manual for details. */ #define PIN_MODE_INPUT(n) (0U << ((n) * 2)) #define PIN_MODE_OUTPUT(n) (1U << ((n) * 2)) #define PIN_MODE_ALTERNATE(n) (2U << ((n) * 2)) #define PIN_MODE_ANALOG(n) (3U << ((n) * 2)) #define PIN_OTYPE_PUSHPULL(n) (0U << (n)) #define PIN_OTYPE_OPENDRAIN(n) (1U << (n)) #define PIN_OSPEED_2M(n) (0U << ((n) * 2)) #define PIN_OSPEED_25M(n) (1U << ((n) * 2)) #define PIN_OSPEED_50M(n) (2U << ((n) * 2)) #define PIN_OSPEED_100M(n) (3U << ((n) * 2)) #define PIN_PUDR_FLOATING(n) (0U << ((n) * 2)) #define PIN_PUDR_PULLUP(n) (1U << ((n) * 2)) #define PIN_PUDR_PULLDOWN(n) (2U << ((n) * 2)) #define PIN_AFIO_AF(n, v) ((v)U << ((n % 8) * 4)) /* * Port A setup. * All input with pull-up except: * PA0 - GPIOA_BUTTON (input floating). * PA4 - GPIOA_LRCK (alternate 6). * PA5 - GPIOA_SPC (alternate 5). * PA6 - GPIOA_SDO (alternate 5). * PA7 - GPIOA_SDI (alternate 5). * PA9 - GPIOA_VBUS_FS (input floating). * PA10 - GPIOA_OTG_FS_ID (alternate 10). * PA11 - GPIOA_OTG_FS_DM (alternate 10). * PA12 - GPIOA_OTG_FS_DP (alternate 10). * PA13 - GPIOA_SWDIO (alternate 0). * PA14 - GPIOA_SWCLK (alternate 0). */ #define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_BUTTON) | \ PIN_MODE_INPUT(1) | \ PIN_MODE_INPUT(2) | \ PIN_MODE_INPUT(3) | \ PIN_MODE_ALTERNATE(GPIOA_LRCK) | \ PIN_MODE_ALTERNATE(GPIOA_SPC) | \ PIN_MODE_ALTERNATE(GPIOA_SDO) | \ PIN_MODE_ALTERNATE(GPIOA_SDI) | \ PIN_MODE_INPUT(8) | \ PIN_MODE_INPUT(GPIOA_VBUS_FS) | \ PIN_MODE_ALTERNATE(GPIOA_OTG_FS_ID) | \ PIN_MODE_ALTERNATE(GPIOA_OTG_FS_DM) | \ PIN_MODE_ALTERNATE(GPIOA_OTG_FS_DP) | \ PIN_MODE_ALTERNATE(GPIOA_SWDIO) | \ PIN_MODE_ALTERNATE(GPIOA_SWCLK) | \ PIN_MODE_INPUT(15)) #define VAL_GPIOA_OTYPER 0x00000000 #define VAL_GPIOA_OSPEEDR 0xFFFFFFFF #define VAL_GPIOA_PUPDR (PIN_PUDR_FLOATING(GPIOA_BUTTON) | \ PIN_PUDR_PULLUP(1) | \ PIN_PUDR_PULLUP(2) | \ PIN_PUDR_PULLUP(3) | \ PIN_PUDR_FLOATING(GPIOA_LRCK) | \ PIN_PUDR_FLOATING(GPIOA_SPC) | \ PIN_PUDR_FLOATING(GPIOA_SDO) | \ PIN_PUDR_FLOATING(GPIOA_SDI) | \ PIN_PUDR_PULLUP(8) | \ PIN_PUDR_FLOATING(GPIOA_VBUS_FS) | \ PIN_PUDR_FLOATING(GPIOA_OTG_FS_ID) | \ PIN_PUDR_FLOATING(GPIOA_OTG_FS_DM) | \ PIN_PUDR_FLOATING(GPIOA_OTG_FS_DP) | \ PIN_PUDR_PULLUP(GPIOA_SWDIO) | \ PIN_PUDR_PULLDOWN(GPIOA_SWCLK) | \ PIN_PUDR_PULLUP(15)) #define VAL_GPIOA_ODR 0xFFFFFFFF #define VAL_GPIOA_AFRL (PIN_AFIO_AF(4, 6) | \ PIN_AFIO_AF(5, 5) | \ PIN_AFIO_AF(6, 5) | \ PIN_AFIO_AF(7, 5)) #define VAL_GPIOA_AFRH (PIN_AFIO_AF(10, 10) | \ PIN_AFIO_AF(11, 10) | \ PIN_AFIO_AF(12, 10) | \ PIN_AFIO_AF(13, 0) | \ PIN_AFIO_AF(14, 0)) /* * Port B setup. * All input with pull-up except: * PB3 - GPIOB_SWO (alternate 0). * PB6 - GPIOB_SCL (alternate 4). * PB9 - GPIOB_SDA (alternate 4). * PB10 - GPIOB_SCK (alternate 5). */ #define VAL_GPIOB_MODER (PIN_MODE_INPUT(0) | \ PIN_MODE_INPUT(1) | \ PIN_MODE_INPUT(2) | \ PIN_MODE_ALTERNATE(GPIOB_SWO) | \ PIN_MODE_INPUT(4) | \ PIN_MODE_INPUT(5) | \ PIN_MODE_ALTERNATE(GPIOB_SCL) | \ PIN_MODE_INPUT(7) | \ PIN_MODE_INPUT(8) | \ PIN_MODE_ALTERNATE(GPIOB_SDA) | \ PIN_MODE_ALTERNATE(GPIOB_SCK) | \ PIN_MODE_INPUT(11) | \ PIN_MODE_INPUT(12) | \ PIN_MODE_INPUT(13) | \ PIN_MODE_INPUT(14) | \ PIN_MODE_INPUT(15)) #define VAL_GPIOB_OTYPER (PIN_OTYPE_OPENDRAIN(GPIOB_SCL) | \ PIN_OTYPE_OPENDRAIN(GPIOB_SDA)) #define VAL_GPIOB_OSPEEDR 0xFFFFFFFF #define VAL_GPIOB_PUPDR (PIN_PUDR_PULLUP(0) | \ PIN_PUDR_PULLUP(1) | \ PIN_PUDR_PULLUP(2) | \ PIN_PUDR_FLOATING(GPIOB_SWO) | \ PIN_PUDR_PULLUP(4) | \ PIN_PUDR_PULLUP(5) | \ PIN_PUDR_FLOATING(GPIOB_SCL) | \ PIN_PUDR_PULLUP(7) | \ PIN_PUDR_PULLUP(8) | \ PIN_PUDR_FLOATING(GPIOB_SDA) | \ PIN_PUDR_FLOATING(GPIOB_SCK | \ PIN_PUDR_PULLUP(11) | \ PIN_PUDR_PULLUP(12) | \ PIN_PUDR_PULLUP(13) | \ PIN_PUDR_PULLUP(14) | \ PIN_PUDR_PULLUP(15)) #define VAL_GPIOB_ODR 0xFFFFFFFF #define VAL_GPIOB_AFRL (PIN_AFIO_AF(3, 0) | \ PIN_AFIO_AF(6, 4)) #define VAL_GPIOB_AFRH (PIN_AFIO_AF(9, 4) | \ PIN_AFIO_AF(10, 5)) /* * Port C setup. * All input with pull-up except: * PC0 - GPIOC_OTG_FS_POWER_ON (output push-pull). * PC3 - GPIOC_DOUT (alternate 5). * PC7 - GPIOC_MCLK (alternate 6). * PC10 - GPIOC_SCLK (alternate 6). * PC12 - GPIOC_SDIN (alternate 6). */ #define VAL_GPIOC_MODER (PIN_MODE_OUTPUT(GPIOC_OTG_FS_POWER_ON) |\ PIN_MODE_INPUT(1) | \ PIN_MODE_INPUT(2) | \ PIN_MODE_ALTERNATE(GPIOC_DOUT) | \ PIN_MODE_INPUT(4) | \ PIN_MODE_INPUT(5) | \ PIN_MODE_INPUT(6) | \ PIN_MODE_ALTERNATE(GPIOC_MCLK) | \ PIN_MODE_INPUT(8) | \ PIN_MODE_INPUT(9) | \ PIN_MODE_ALTERNATE(GPIOC_SCLK) | \ PIN_MODE_INPUT(11) | \ PIN_MODE_ALTERNATE(GPIOC_SDIN)) \ PIN_MODE_INPUT(13) | \ PIN_MODE_INPUT(14) | \ PIN_MODE_INPUT(15)) #define VAL_GPIOC_OTYPER 0x00000000 #define VAL_GPIOC_OSPEEDR 0xFFFFFFFF #define VAL_GPIOC_PUPDR (PIN_PUDR_FLOATING(GPIOC_OTG_FS_POWER_ON) |\ PIN_PUDR_PULLUP(1) | \ PIN_PUDR_PULLUP(2) | \ PIN_PUDR_FLOATING(GPIOC_DOUT)) | \ PIN_PUDR_PULLUP(4) | \ PIN_PUDR_PULLUP(5) | \ PIN_PUDR_PULLUP(6) | \ PIN_PUDR_FLOATING(GPIOC_MCLK)) | \ PIN_PUDR_PULLUP(8) | \ PIN_PUDR_PULLUP(9) | \ PIN_PUDR_FLOATING(GPIOC_SCLK)) | \ PIN_PUDR_PULLUP(11) | \ PIN_PUDR_FLOATING(GPIOC_SDIN)) | \ PIN_PUDR_PULLUP(13) | \ PIN_PUDR_PULLUP(14) | \ PIN_PUDR_PULLUP(15)) #define VAL_GPIOC_ODR 0xFFFFFFFF #define VAL_GPIOC_AFRL (PIN_AFIO_AF(3, 5) | \ PIN_AFIO_AF(7, 6)) #define VAL_GPIOC_AFRH (PIN_AFIO_AF(10, 6) | \ PIN_AFIO_AF(12, 6)) /* * Port D setup. * All input with pull-up except: * PD4 - GPIOD_RESET (output push-pull). * PD5 - GPIOD_OVER_CURRENT (input floating). * PD12 - GPIOD_LED4 (output push-pull). * PD13 - GPIOD_LED3 (output push-pull). * PD14 - GPIOD_LED5 (output push-pull). * PD15 - GPIOD_LED6 (output push-pull). */ #define VAL_GPIOD_MODER (PIN_MODE_INPUT(0) | \ PIN_MODE_INPUT(1) | \ PIN_MODE_INPUT(2) | \ PIN_MODE_INPUT(3) | \ PIN_MODE_OUTPUT(GPIOD_RESET) | \ PIN_MODE_INPUT(GPIOD_OVER_CURRENT) | \ PIN_MODE_INPUT(6) | \ PIN_MODE_INPUT(7) | \ PIN_MODE_INPUT(8) | \ PIN_MODE_INPUT(9) | \ PIN_MODE_INPUT(10) | \ PIN_MODE_INPUT(11) | \ PIN_MODE_INPUT(GPIOD_LED4) | \ PIN_MODE_INPUT(GPIOD_LED3) | \ PIN_MODE_INPUT(GPIOD_LED5) | \ PIN_MODE_INPUT(GPIOD_LED6)) #define VAL_GPIOD_OTYPER 0x00000000 #define VAL_GPIOD_OSPEEDR 0xFFFFFFFF #define VAL_GPIOD_PUPDR (PIN_PUDR_PULLUP(0) | \ PIN_PUDR_PULLUP(1) | \ PIN_PUDR_PULLUP(2) | \ PIN_PUDR_PULLUP(3) | \ PIN_PUDR_FLOATING(GPIOD_RESET) | \ PIN_PUDR_FLOATING(GPIOD_OVER_CURRENT) |\ PIN_PUDR_PULLUP(6) | \ PIN_PUDR_PULLUP(7) | \ PIN_PUDR_PULLUP(8) | \ PIN_PUDR_PULLUP(9) | \ PIN_PUDR_PULLUP(10) | \ PIN_PUDR_PULLUP(11) | \ PIN_PUDR_FLOATING(GPIOD_LED4) | \ PIN_PUDR_FLOATING(GPIOD_LED3) | \ PIN_PUDR_FLOATING(GPIOD_LED5) | \ PIN_PUDR_FLOATING(GPIOD_LED6)) #define VAL_GPIOD_ODR 0x0FFFFFCF #define VAL_GPIOD_AFRL 0x00000000 #define VAL_GPIOD_AFRH 0x00000000 /* * Port E setup. * All input with pull-up except: * PE0 - GPIOE_INT1 (input floating). * PE1 - GPIOE_INT2 (input floating). * PE3 - GPIOE_CS_SPI (output push-pull). */ #define VAL_GPIOE_MODER (PIN_MODE_INPUT(GPIOE_INT1) | \ PIN_MODE_INPUT(GPIOE_INT2) | \ PIN_MODE_INPUT(2) | \ PIN_MODE_INPUT(GPIOE_CS_SPI) | \ PIN_MODE_INPUT(4) | \ PIN_MODE_INPUT(5) | \ PIN_MODE_INPUT(6) | \ PIN_MODE_INPUT(7) | \ PIN_MODE_INPUT(8) | \ PIN_MODE_INPUT(9) | \ PIN_MODE_INPUT(10) | \ PIN_MODE_INPUT(11) | \ PIN_MODE_INPUT(12) | \ PIN_MODE_INPUT(13) | \ PIN_MODE_INPUT(14) | \ PIN_MODE_INPUT(15)) #define VAL_GPIOE_OTYPER 0x00000000 #define VAL_GPIOE_OSPEEDR 0xFFFFFFFF #define VAL_GPIOE_PUPDR (PIN_PUDR_FLOATING(0GPIOE_INT1) | \ PIN_PUDR_FLOATING(GPIOE_INT2) | \ PIN_PUDR_PULLUP(2) | \ PIN_PUDR_FLOATING(GPIOE_CS_SPI) | \ PIN_PUDR_PULLUP(4) | \ PIN_PUDR_PULLUP(5) | \ PIN_PUDR_PULLUP(6) | \ PIN_PUDR_PULLUP(7) | \ PIN_PUDR_PULLUP(8) | \ PIN_PUDR_PULLUP(9) | \ PIN_PUDR_PULLUP(10) | \ PIN_PUDR_PULLUP(11) | \ PIN_PUDR_PULLUP(12) | \ PIN_PUDR_PULLUP(13) | \ PIN_PUDR_PULLUP(14) | \ PIN_PUDR_PULLUP(15)) #define VAL_GPIOE_ODR 0xFFFFFFFF #define VAL_GPIOE_AFRL 0x00000000 #define VAL_GPIOE_AFRH 0x00000000 /* * Port F setup. * All input with pull-up. */ #define VAL_GPIOF_MODER 0x00000000 #define VAL_GPIOF_OTYPER 0x00000000 #define VAL_GPIOF_OSPEEDR 0xFFFFFFFF #define VAL_GPIOF_PUPDR 0xFFFFFFFF #define VAL_GPIOF_ODR 0xFFFFFFFF #define VAL_GPIOF_AFRL 0x00000000 #define VAL_GPIOF_AFRH 0x00000000 /* * Port G setup. * All input with pull-up. */ #define VAL_GPIOG_MODER 0x00000000 #define VAL_GPIOG_OTYPER 0x00000000 #define VAL_GPIOG_OSPEEDR 0xFFFFFFFF #define VAL_GPIOG_PUPDR 0xFFFFFFFF #define VAL_GPIOG_ODR 0xFFFFFFFF #define VAL_GPIOG_AFRL 0x00000000 #define VAL_GPIOG_AFRH 0x00000000 /* * Port H setup. * All input with pull-up except: * PH0 - GPIOH_OSC_IN (input floating). * PH1 - GPIOH_OSC_OUT (input floating). */ #define VAL_GPIOH_MODER (PIN_MODE_INPUT(GPIOH_OSC_IN) | \ PIN_MODE_INPUT(GPIOH_OSC_OUT) | \ PIN_MODE_INPUT(2) | \ PIN_MODE_INPUT(3) | \ PIN_MODE_INPUT(4) | \ PIN_MODE_INPUT(5) | \ PIN_MODE_INPUT(6) | \ PIN_MODE_INPUT(7) | \ PIN_MODE_INPUT(8) | \ PIN_MODE_INPUT(9) | \ PIN_MODE_INPUT(10) | \ PIN_MODE_INPUT(11) | \ PIN_MODE_INPUT(12) | \ PIN_MODE_INPUT(13) | \ PIN_MODE_INPUT(14) | \ PIN_MODE_INPUT(15)) #define VAL_GPIOH_OTYPER 0x00000000 #define VAL_GPIOH_OSPEEDR 0xFFFFFFFF #define VAL_GPIOH_PUPDR (PIN_PUDR_FLOATING(GPIOH_OSC_IN) | \ PIN_PUDR_FLOATING(GPIOH_OSC_OUT) | \ PIN_PUDR_PULLUP(2) | \ PIN_PUDR_PULLUP(3) | \ PIN_PUDR_PULLUP(4) | \ PIN_PUDR_PULLUP(5) | \ PIN_PUDR_PULLUP(6) | \ PIN_PUDR_PULLUP(7) | \ PIN_PUDR_PULLUP(8) | \ PIN_PUDR_PULLUP(9) | \ PIN_PUDR_PULLUP(10) | \ PIN_PUDR_PULLUP(11) | \ PIN_PUDR_PULLUP(12) | \ PIN_PUDR_PULLUP(13) | \ PIN_PUDR_PULLUP(14) | \ PIN_PUDR_PULLUP(15)) #define VAL_GPIOH_ODR 0xFFFFFFFF #define VAL_GPIOH_AFRL 0x00000000 #define VAL_GPIOH_AFRH 0x00000000 /* * Port I setup. * All input with pull-up. */ #define VAL_GPIOI_MODER 0x00000000 #define VAL_GPIOI_OTYPER 0x00000000 #define VAL_GPIOI_OSPEEDR 0xFFFFFFFF #define VAL_GPIOI_PUPDR 0xFFFFFFFF #define VAL_GPIOI_ODR 0xFFFFFFFF #define VAL_GPIOI_AFRL 0x00000000 #define VAL_GPIOI_AFRH 0x00000000 #if !defined(_FROM_ASM_) #ifdef __cplusplus extern "C" { #endif void boardInit(void); #ifdef __cplusplus } #endif #endif /* _FROM_ASM_ */ #endif /* _BOARD_H_ */