/*
    ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
                 2011,2012 Giovanni Di Sirio.

    This file is part of ChibiOS/RT.

    ChibiOS/RT is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 3 of the License, or
    (at your option) any later version.

    ChibiOS/RT is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program.  If not, see <http://www.gnu.org/licenses/>.
*/

/**
 * @file    STM32/OTGv1/usb_lld.h
 * @brief   STM32 USB subsystem low level driver header.
 *
 * @addtogroup USB
 * @{
 */

#ifndef _USB_LLD_H_
#define _USB_LLD_H_

#if HAL_USE_USB || defined(__DOXYGEN__)

#include "stm32_otg.h"

/*===========================================================================*/
/* Driver constants.                                                         */
/*===========================================================================*/

/**
 * @brief   Maximum endpoint address.
 */
#define USB_MAX_ENDPOINTS                   3

/**
 * @brief   The address can be changed immediately upon packet reception.
 */
#define USB_SET_ADDRESS_MODE                USB_EARLY_SET_ADDRESS

/*===========================================================================*/
/* Driver pre-compile time settings.                                         */
/*===========================================================================*/

/**
 * @brief   OTG1 driver enable switch.
 * @details If set to @p TRUE the support for USB1 is included.
 * @note    The default is @p TRUE.
 */
#if !defined(STM32_USB_USE_OTG1) || defined(__DOXYGEN__)
#define STM32_USB_USE_OTG1                  TRUE
#endif

/**
 * @brief   OTG1 interrupt priority level setting.
 */
#if !defined(STM32_USB_OTG1_IRQ_PRIORITY) || defined(__DOXYGEN__)
#define STM32_USB_OTG1_IRQ_PRIORITY         14
#endif

/**
 * @brief   OTG1 RX shared FIFO size.
 * @note    Must be a multiple of 4.
 */
#if !defined(STM32_USB_OTG1_RX_FIFO_SIZE) || defined(__DOXYGEN__)
#define STM32_USB_OTG1_RX_FIFO_SIZE         512
#endif

/*===========================================================================*/
/* Derived constants and error checks.                                       */
/*===========================================================================*/

#if STM32_USB_USE_OTG1 && !STM32_HAS_OTG1
#error "OTG1 not present in the selected device"
#endif

#if !STM32_USB_USE_OTG1
#error "USB driver activated but no USB peripheral assigned"
#endif

#if STM32_USB_USE_OTG1 &&                                                \
    !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_USB_OTG1_IRQ_PRIORITY)
#error "Invalid IRQ priority assigned to OTG1"
#endif

#if (STM32_USB_OTG1_RX_FIFO_SIZE & 3) != 0
#error "RX FIFO size must be a multiple of 4"
#endif

#if defined(STM32F4XX) || defined(STM32F2XX)
#define STM32_USBCLK                        STM32_PLL48CLK
#elif defined(STM32F10X_CL)
#define STM32_USBCLK                        STM32_OTGFSCLK
#else
#error "unsupported STM32 platform for OTG functionality"
#endif

#if STM32_USBCLK != 48000000
#error "the USB OTG driver requires a 48MHz clock"
#endif

/*===========================================================================*/
/* Driver data structures and types.                                         */
/*===========================================================================*/

/**
 * @brief   Type of an IN endpoint state structure.
 */
typedef struct {
  /**
   * @brief   Buffer mode, queue or linear.
   */
  bool_t                        txqueued;
  /**
   * @brief   Requested transmit transfer size.
   */
  size_t                        txsize;
  /**
   * @brief   Transmitted bytes so far.
   */
  size_t                        txcnt;
  union {
    struct {
      /**
       * @brief   Pointer to the transmission linear buffer.
       */
      const uint8_t             *txbuf;
    } linear;
    struct {
      /**
       * @brief   Pointer to the output queue.
       */
      OutputQueue               *txqueue;
    } queue;
  } mode;
} USBInEndpointState;

/**
 * @brief   Type of an OUT endpoint state structure.
 */
typedef struct {
  /**
   * @brief   Buffer mode, queue or linear.
   */
  bool_t                        rxqueued;
  /**
   * @brief   Requested receive transfer size.
   */
  size_t                        rxsize;
  /**
   * @brief   Received bytes so far.
   */
  size_t                        rxcnt;
  union {
    struct {
      /**
       * @brief   Pointer to the receive linear buffer.
       */
      uint8_t                   *rxbuf;
    } linear;
    struct {
      /**
       * @brief   Pointer to the input queue.
       */
      InputQueue               *rxqueue;
    } queue;
  } mode;
} USBOutEndpointState;

/**
 * @brief   Type of an USB endpoint configuration structure.
 * @note    Platform specific restrictions may apply to endpoints.
 */
typedef struct {
  /**
   * @brief   Type and mode of the endpoint.
   */
  uint32_t                      ep_mode;
  /**
   * @brief   Setup packet notification callback.
   * @details This callback is invoked when a setup packet has been
   *          received.
   * @post    The application must immediately call @p usbReadPacket() in
   *          order to access the received packet.
   * @note    This field is only valid for @p USB_EP_MODE_TYPE_CTRL
   *          endpoints, it should be set to @p NULL for other endpoint
   *          types.
   */
  usbepcallback_t               setup_cb;
  /**
   * @brief   IN endpoint notification callback.
   * @details This field must be set to @p NULL if the IN endpoint is not
   *          used.
   */
  usbepcallback_t               in_cb;
  /**
   * @brief   OUT endpoint notification callback.
   * @details This field must be set to @p NULL if the OUT endpoint is not
   *          used.
   */
  usbepcallback_t               out_cb;
  /**
   * @brief   IN endpoint maximum packet size.
   * @details This field must be set to zero if the IN endpoint is not
   *          used.
   */
  uint16_t                      in_maxsize;
  /**
   * @brief   OUT endpoint maximum packet size.
   * @details This field must be set to zero if the OUT endpoint is not
   *          used.
   */
  uint16_t                      out_maxsize;
  /**
   * @brief   @p USBEndpointState associated to the IN endpoint.
   * @details This structure maintains the state of the IN endpoint.
   */
  USBInEndpointState            *in_state;
  /**
   * @brief   @p USBEndpointState associated to the OUT endpoint.
   * @details This structure maintains the state of the OUT endpoint.
   */
  USBOutEndpointState           *out_state;
  /* End of the mandatory fields.*/
  /**
   * @brief   Pointer to a buffer for setup packets.
   * @details Setup packets require a dedicated 8-bytes buffer, set this
   *          field to @p NULL for non-control endpoints.
   */
  uint8_t                       *setup_buf;
} USBEndpointConfig;

/**
 * @brief   Type of an USB driver configuration structure.
 */
typedef struct {
  /**
   * @brief   USB events callback.
   * @details This callback is invoked when an USB driver event is registered.
   */
  usbeventcb_t                  event_cb;
  /**
   * @brief   Device GET_DESCRIPTOR request callback.
   * @note    This callback is mandatory and cannot be set to @p NULL.
   */
  usbgetdescriptor_t            get_descriptor_cb;
  /**
   * @brief   Requests hook callback.
   * @details This hook allows to be notified of standard requests or to
   *          handle non standard requests.
   */
  usbreqhandler_t               requests_hook_cb;
  /**
   * @brief   Start Of Frame callback.
   */
  usbcallback_t                 sof_cb;
  /* End of the mandatory fields.*/
} USBConfig;

/**
 * @brief   Structure representing an USB driver.
 */
struct USBDriver {
  /**
   * @brief   Driver state.
   */
  usbstate_t                    state;
  /**
   * @brief   Current configuration data.
   */
  const USBConfig               *config;
  /**
   * @brief   Field available to user, it can be used to associate an
   *          application-defined handler to the USB driver.
   */
  void                          *param;
  /**
   * @brief   Bit map of the transmitting IN endpoints.
   */
  uint16_t                      transmitting;
  /**
   * @brief   Bit map of the receiving OUT endpoints.
   */
  uint16_t                      receiving;
  /**
   * @brief   Active endpoints configurations.
   */
  const USBEndpointConfig       *epc[USB_MAX_ENDPOINTS + 1];
  /**
   * @brief   Endpoint 0 state.
   */
  usbep0state_t                 ep0state;
  /**
   * @brief   Next position in the buffer to be transferred through endpoint 0.
   */
  uint8_t                       *ep0next;
  /**
   * @brief   Number of bytes yet to be transferred through endpoint 0.
   */
  size_t                        ep0n;
  /**
   * @brief   Endpoint 0 end transaction callback.
   */
  usbcallback_t                 ep0endcb;
  /**
   * @brief   Setup packet buffer.
   */
  uint8_t                       setup[8];
  /**
   * @brief   Current USB device status.
   */
  uint16_t                      status;
  /**
   * @brief   Assigned USB address.
   */
  uint8_t                       address;
  /**
   * @brief   Current USB device configuration.
   */
  uint8_t                       configuration;
#if defined(USB_DRIVER_EXT_FIELDS)
  USB_DRIVER_EXT_FIELDS
#endif
  /* End of the mandatory fields.*/
  /**
   * @brief   Pointer to the next address in the packet memory.
   */
  uint32_t                      pmnext;
};

/*===========================================================================*/
/* Driver macros.                                                            */
/*===========================================================================*/

/**
 * @brief   Returns the exact size of a receive transaction.
 * @details The received size can be different from the size specified in
 *          @p usbStartReceiveI() because the last packet could have a size
 *          different from the expected one.
 * @pre     The OUT endpoint must have been configured in transaction mode
 *          in order to use this function.
 *
 * @param[in] usbp      pointer to the @p USBDriver object
 * @param[in] ep        endpoint number
 * @return              Received data size.
 *
 * @notapi
 */
#define usb_lld_get_transaction_size(usbp, ep)                              \
  ((usbp)->epc[ep]->out_state->rxcnt)

/**
 * @brief   Connects the USB device.
 *
 * @api
 */
#define usb_lld_connect_bus(usbp) (OTG->GCCFG |= GCCFG_VBUSBSEN)

/**
 * @brief   Disconnect the USB device.
 *
 * @api
 */
#define usb_lld_disconnect_bus(usbp) (OTG->GCCFG &= ~GCCFG_VBUSBSEN)

/*===========================================================================*/
/* External declarations.                                                    */
/*===========================================================================*/

#if STM32_USB_USE_OTG1 && !defined(__DOXYGEN__)
extern USBDriver USBD1;
#endif

#ifdef __cplusplus
extern "C" {
#endif
  void usb_lld_init(void);
  void usb_lld_start(USBDriver *usbp);
  void usb_lld_stop(USBDriver *usbp);
  void usb_lld_reset(USBDriver *usbp);
  void usb_lld_set_address(USBDriver *usbp);
  void usb_lld_init_endpoint(USBDriver *usbp, usbep_t ep);
  void usb_lld_disable_endpoints(USBDriver *usbp);
  usbepstatus_t usb_lld_get_status_in(USBDriver *usbp, usbep_t ep);
  usbepstatus_t usb_lld_get_status_out(USBDriver *usbp, usbep_t ep);
  void usb_lld_read_setup(USBDriver *usbp, usbep_t ep, uint8_t *buf);
  void usb_lld_prepare_receive(USBDriver *usbp, usbep_t ep);
  void usb_lld_prepare_transmit(USBDriver *usbp, usbep_t ep);
  void usb_lld_start_out(USBDriver *usbp, usbep_t ep);
  void usb_lld_start_in(USBDriver *usbp, usbep_t ep);
  void usb_lld_stall_out(USBDriver *usbp, usbep_t ep);
  void usb_lld_stall_in(USBDriver *usbp, usbep_t ep);
  void usb_lld_clear_out(USBDriver *usbp, usbep_t ep);
  void usb_lld_clear_in(USBDriver *usbp, usbep_t ep);
#ifdef __cplusplus
}
#endif

#endif /* HAL_USE_USB */

#endif /* _USB_LLD_H_ */

/** @} */