From dd8ce2d03d3c330abb67030a9827cb3643eeb740 Mon Sep 17 00:00:00 2001
From: gdisirio <gdisirio@35acf78f-673a-0410-8e92-d51de3d6d3f4>
Date: Sat, 7 Jul 2012 09:35:22 +0000
Subject: [PATCH] git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@4420
 35acf78f-673a-0410-8e92-d51de3d6d3f4

---
 os/hal/platforms/STM32/GPIOv2/pal_lld.h | 18 ------------------
 1 file changed, 18 deletions(-)

diff --git a/os/hal/platforms/STM32/GPIOv2/pal_lld.h b/os/hal/platforms/STM32/GPIOv2/pal_lld.h
index 95a9ed669..d6e7ee7e5 100644
--- a/os/hal/platforms/STM32/GPIOv2/pal_lld.h
+++ b/os/hal/platforms/STM32/GPIOv2/pal_lld.h
@@ -357,9 +357,6 @@ typedef GPIO_TypeDef * ioportid_t;
  * @brief   Writes on a I/O port.
  * @details This function is implemented by writing the GPIO ODR register, the
  *          implementation has no side effects.
- * @note    Writing on pads programmed as pull-up or pull-down has the side
- *          effect to modify the resistor setting because the output latched
- *          data is used for the resistor selection.
  *
  * @param[in] port      port identifier
  * @param[in] bits      bits to be written on the specified port
@@ -372,9 +369,6 @@ typedef GPIO_TypeDef * ioportid_t;
  * @brief   Sets a bits mask on a I/O port.
  * @details This function is implemented by writing the GPIO BSRR register, the
  *          implementation has no side effects.
- * @note    Writing on pads programmed as pull-up or pull-down has the side
- *          effect to modify the resistor setting because the output latched
- *          data is used for the resistor selection.
  *
  * @param[in] port      port identifier
  * @param[in] bits      bits to be ORed on the specified port
@@ -387,9 +381,6 @@ typedef GPIO_TypeDef * ioportid_t;
  * @brief   Clears a bits mask on a I/O port.
  * @details This function is implemented by writing the GPIO BSRR register, the
  *          implementation has no side effects.
- * @note    Writing on pads programmed as pull-up or pull-down has the side
- *          effect to modify the resistor setting because the output latched
- *          data is used for the resistor selection.
  *
  * @param[in] port      port identifier
  * @param[in] bits      bits to be cleared on the specified port
@@ -402,9 +393,6 @@ typedef GPIO_TypeDef * ioportid_t;
  * @brief   Writes a group of bits.
  * @details This function is implemented by writing the GPIO BSRR register, the
  *          implementation has no side effects.
- * @note    Writing on pads programmed as pull-up or pull-down has the side
- *          effect to modify the resistor setting because the output latched
- *          data is used for the resistor selection.
  *
  * @param[in] port      port identifier
  * @param[in] mask      group mask
@@ -422,9 +410,6 @@ typedef GPIO_TypeDef * ioportid_t;
  * @brief   Pads group mode setup.
  * @details This function programs a pads group belonging to the same port
  *          with the specified mode.
- * @note    Writing on pads programmed as pull-up or pull-down has the side
- *          effect to modify the resistor setting because the output latched
- *          data is used for the resistor selection.
  *
  * @param[in] port      port identifier
  * @param[in] mask      group mask
@@ -438,9 +423,6 @@ typedef GPIO_TypeDef * ioportid_t;
 
 /**
  * @brief   Writes a logical state on an output pad.
- * @note    Writing on pads programmed as pull-up or pull-down has the side
- *          effect to modify the resistor setting because the output latched
- *          data is used for the resistor selection.
  *
  * @param[in] port      port identifier
  * @param[in] pad       pad number within the port