diff --git a/os/hal/platforms/STM32/USARTv2/uart_lld.c b/os/hal/platforms/STM32/USARTv2/uart_lld.c
new file mode 100644
index 000000000..b2c5fb080
--- /dev/null
+++ b/os/hal/platforms/STM32/USARTv2/uart_lld.c
@@ -0,0 +1,588 @@
+/*
+ ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
+ 2011,2012 Giovanni Di Sirio.
+
+ This file is part of ChibiOS/RT.
+
+ ChibiOS/RT is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ ChibiOS/RT is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see .
+*/
+
+/**
+ * @file STM32/uart_lld.c
+ * @brief STM32 low level UART driver code.
+ *
+ * @addtogroup UART
+ * @{
+ */
+
+#include "ch.h"
+#include "hal.h"
+
+#if HAL_USE_UART || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver local definitions. */
+/*===========================================================================*/
+
+#define USART1_RX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_UART_USART1_RX_DMA_STREAM, \
+ STM32_USART1_RX_DMA_CHN)
+
+#define USART1_TX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_UART_USART1_TX_DMA_STREAM, \
+ STM32_USART1_TX_DMA_CHN)
+
+#define USART2_RX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_UART_USART2_RX_DMA_STREAM, \
+ STM32_USART2_RX_DMA_CHN)
+
+#define USART2_TX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_UART_USART2_TX_DMA_STREAM, \
+ STM32_USART2_TX_DMA_CHN)
+
+#define USART3_RX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_UART_USART3_RX_DMA_STREAM, \
+ STM32_USART3_RX_DMA_CHN)
+
+#define USART3_TX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_UART_USART3_TX_DMA_STREAM, \
+ STM32_USART3_TX_DMA_CHN)
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/** @brief USART1 UART driver identifier.*/
+#if STM32_UART_USE_USART1 || defined(__DOXYGEN__)
+UARTDriver UARTD1;
+#endif
+
+/** @brief USART2 UART driver identifier.*/
+#if STM32_UART_USE_USART2 || defined(__DOXYGEN__)
+UARTDriver UARTD2;
+#endif
+
+/** @brief USART3 UART driver identifier.*/
+#if STM32_UART_USE_USART3 || defined(__DOXYGEN__)
+UARTDriver UARTD3;
+#endif
+
+/*===========================================================================*/
+/* Driver local variables. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Status bits translation.
+ *
+ * @param[in] sr USART SR register value
+ *
+ * @return The error flags.
+ */
+static uartflags_t translate_errors(uint16_t isr) {
+ uartflags_t sts = 0;
+
+ if (isr & USART_ISR_ORE)
+ sts |= UART_OVERRUN_ERROR;
+ if (isr & USART_ISR_PE)
+ sts |= UART_PARITY_ERROR;
+ if (isr & USART_ISR_FE)
+ sts |= UART_FRAMING_ERROR;
+ if (isr & USART_ISR_NE)
+ sts |= UART_NOISE_ERROR;
+ if (isr & USART_ISR_LBD)
+ sts |= UART_BREAK_DETECTED;
+ return sts;
+}
+
+/**
+ * @brief Puts the receiver in the UART_RX_IDLE state.
+ *
+ * @param[in] uartp pointer to the @p UARTDriver object
+ */
+static void set_rx_idle_loop(UARTDriver *uartp) {
+ uint32_t mode;
+
+ /* RX DMA channel preparation, if the char callback is defined then the
+ TCIE interrupt is enabled too.*/
+ if (uartp->config->rxchar_cb == NULL)
+ mode = STM32_DMA_CR_DIR_P2M | STM32_DMA_CR_CIRC;
+ else
+ mode = STM32_DMA_CR_DIR_P2M | STM32_DMA_CR_CIRC | STM32_DMA_CR_TCIE;
+ dmaStreamSetMemory0(uartp->dmarx, &uartp->rxbuf);
+ dmaStreamSetTransactionSize(uartp->dmarx, 1);
+ dmaStreamSetMode(uartp->dmarx, uartp->dmamode | mode);
+ dmaStreamEnable(uartp->dmarx);
+}
+
+/**
+ * @brief USART de-initialization.
+ * @details This function must be invoked with interrupts disabled.
+ *
+ * @param[in] uartp pointer to the @p UARTDriver object
+ */
+static void usart_stop(UARTDriver *uartp) {
+
+ /* Stops RX and TX DMA channels.*/
+ dmaStreamDisable(uartp->dmarx);
+ dmaStreamDisable(uartp->dmatx);
+
+ /* Stops USART operations.*/
+ uartp->usart->CR1 = 0;
+ uartp->usart->CR2 = 0;
+ uartp->usart->CR3 = 0;
+}
+
+/**
+ * @brief USART initialization.
+ * @details This function must be invoked with interrupts disabled.
+ *
+ * @param[in] uartp pointer to the @p UARTDriver object
+ */
+static void usart_start(UARTDriver *uartp) {
+ uint16_t cr1;
+ USART_TypeDef *u = uartp->usart;
+
+ /* Defensive programming, starting from a clean state.*/
+ usart_stop(uartp);
+
+ /* Baud rate setting.*/
+#if defined(STM32F0XX)
+ if (uartp->usart == USART1)
+ u->BRR = STM32_USART1CLK / uartp->config->speed;
+ else
+ u->BRR = STM32_PCLK / uartp->config->speed;
+#else /* !defined(STM32F0XX) */
+ if (uartp->usart == USART1)
+ u->BRR = STM32_PCLK2 / uartp->config->speed;
+ else
+ u->BRR = STM32_PCLK1 / uartp->config->speed;
+#endif /* !defined(STM32F0XX) */
+
+ /* Resetting eventual pending status flags.*/
+ u->ICR = 0xFFFFFFFF;
+
+ /* Note that some bits are enforced because required for correct driver
+ operations.*/
+ if (uartp->config->txend2_cb == NULL)
+ cr1 = USART_CR1_UE | USART_CR1_PEIE | USART_CR1_TE | USART_CR1_RE;
+ else
+ cr1 = USART_CR1_UE | USART_CR1_PEIE | USART_CR1_TE | USART_CR1_RE |
+ USART_CR1_TCIE;
+ u->CR1 = uartp->config->cr1 | cr1;
+ u->CR2 = uartp->config->cr2 | USART_CR2_LBDIE;
+ u->CR3 = uartp->config->cr3 | USART_CR3_DMAT | USART_CR3_DMAR |
+ USART_CR3_EIE;
+
+ /* Starting the receiver idle loop.*/
+ set_rx_idle_loop(uartp);
+}
+
+/**
+ * @brief RX DMA common service routine.
+ *
+ * @param[in] uartp pointer to the @p UARTDriver object
+ * @param[in] flags pre-shifted content of the ISR register
+ */
+static void uart_lld_serve_rx_end_irq(UARTDriver *uartp, uint32_t flags) {
+
+ /* DMA errors handling.*/
+#if defined(STM32_UART_DMA_ERROR_HOOK)
+ if ((flags & (STM32_DMA_ISR_TEIF | STM32_DMA_ISR_DMEIF)) != 0) {
+ STM32_UART_DMA_ERROR_HOOK(uartp);
+ }
+#else
+ (void)flags;
+#endif
+
+ if (uartp->rxstate == UART_RX_IDLE) {
+ /* Receiver in idle state, a callback is generated, if enabled, for each
+ received character and then the driver stays in the same state.*/
+ if (uartp->config->rxchar_cb != NULL)
+ uartp->config->rxchar_cb(uartp, uartp->rxbuf);
+ }
+ else {
+ /* Receiver in active state, a callback is generated, if enabled, after
+ a completed transfer.*/
+ dmaStreamDisable(uartp->dmarx);
+ uartp->rxstate = UART_RX_COMPLETE;
+ if (uartp->config->rxend_cb != NULL)
+ uartp->config->rxend_cb(uartp);
+
+ /* If the callback didn't explicitly change state then the receiver
+ automatically returns to the idle state.*/
+ if (uartp->rxstate == UART_RX_COMPLETE) {
+ uartp->rxstate = UART_RX_IDLE;
+ set_rx_idle_loop(uartp);
+ }
+ }
+}
+
+/**
+ * @brief TX DMA common service routine.
+ *
+ * @param[in] uartp pointer to the @p UARTDriver object
+ * @param[in] flags pre-shifted content of the ISR register
+ */
+static void uart_lld_serve_tx_end_irq(UARTDriver *uartp, uint32_t flags) {
+
+ /* DMA errors handling.*/
+#if defined(STM32_UART_DMA_ERROR_HOOK)
+ if ((flags & (STM32_DMA_ISR_TEIF | STM32_DMA_ISR_DMEIF)) != 0) {
+ STM32_UART_DMA_ERROR_HOOK(uartp);
+ }
+#else
+ (void)flags;
+#endif
+
+ dmaStreamDisable(uartp->dmatx);
+
+ /* A callback is generated, if enabled, after a completed transfer.*/
+ uartp->txstate = UART_TX_COMPLETE;
+ if (uartp->config->txend1_cb != NULL)
+ uartp->config->txend1_cb(uartp);
+
+ /* If the callback didn't explicitly change state then the transmitter
+ automatically returns to the idle state.*/
+ if (uartp->txstate == UART_TX_COMPLETE)
+ uartp->txstate = UART_TX_IDLE;
+}
+
+/**
+ * @brief USART common service routine.
+ *
+ * @param[in] uartp pointer to the @p UARTDriver object
+ */
+static void serve_usart_irq(UARTDriver *uartp) {
+ uint16_t isr;
+ USART_TypeDef *u = uartp->usart;
+
+ /* Reading and clearing status.*/
+ isr = u->ISR;
+ u->ICR = isr;
+
+ if (isr & (USART_ISR_LBD | USART_ISR_ORE | USART_ISR_NE |
+ USART_ISR_FE | USART_ISR_PE)) {
+ if (uartp->config->rxerr_cb != NULL)
+ uartp->config->rxerr_cb(uartp, translate_errors(isr));
+ }
+ if (isr & USART_ISR_TC) {
+ /* End of transmission, a callback is generated.*/
+ if (uartp->config->txend2_cb != NULL)
+ uartp->config->txend2_cb(uartp);
+ }
+}
+
+/*===========================================================================*/
+/* Driver interrupt handlers. */
+/*===========================================================================*/
+
+#if STM32_UART_USE_USART1 || defined(__DOXYGEN__)
+/**
+ * @brief USART1 IRQ handler.
+ *
+ * @isr
+ */
+CH_IRQ_HANDLER(USART1_IRQHandler) {
+
+ CH_IRQ_PROLOGUE();
+
+ serve_usart_irq(&UARTD1);
+
+ CH_IRQ_EPILOGUE();
+}
+#endif /* STM32_UART_USE_USART1 */
+
+#if STM32_UART_USE_USART2 || defined(__DOXYGEN__)
+/**
+ * @brief USART2 IRQ handler.
+ *
+ * @isr
+ */
+CH_IRQ_HANDLER(USART2_IRQHandler) {
+
+ CH_IRQ_PROLOGUE();
+
+ serve_usart_irq(&UARTD2);
+
+ CH_IRQ_EPILOGUE();
+}
+#endif /* STM32_UART_USE_USART2 */
+
+#if STM32_UART_USE_USART3 || defined(__DOXYGEN__)
+/**
+ * @brief USART3 IRQ handler.
+ *
+ * @isr
+ */
+CH_IRQ_HANDLER(USART3_IRQHandler) {
+
+ CH_IRQ_PROLOGUE();
+
+ serve_usart_irq(&UARTD3);
+
+ CH_IRQ_EPILOGUE();
+}
+#endif /* STM32_UART_USE_USART3 */
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Low level UART driver initialization.
+ *
+ * @notapi
+ */
+void uart_lld_init(void) {
+
+#if STM32_UART_USE_USART1
+ uartObjectInit(&UARTD1);
+ UARTD1.usart = USART1;
+ UARTD1.dmarx = STM32_DMA_STREAM(STM32_UART_USART1_RX_DMA_STREAM);
+ UARTD1.dmatx = STM32_DMA_STREAM(STM32_UART_USART1_TX_DMA_STREAM);
+#endif
+
+#if STM32_UART_USE_USART2
+ uartObjectInit(&UARTD2);
+ UARTD2.usart = USART2;
+ UARTD2.dmarx = STM32_DMA_STREAM(STM32_UART_USART2_RX_DMA_STREAM);
+ UARTD2.dmatx = STM32_DMA_STREAM(STM32_UART_USART2_TX_DMA_STREAM);
+#endif
+
+#if STM32_UART_USE_USART3
+ uartObjectInit(&UARTD3);
+ UARTD3.usart = USART3;
+ UARTD3.dmarx = STM32_DMA_STREAM(STM32_UART_USART3_RX_DMA_STREAM);
+ UARTD3.dmatx = STM32_DMA_STREAM(STM32_UART_USART3_TX_DMA_STREAM);
+#endif
+}
+
+/**
+ * @brief Configures and activates the UART peripheral.
+ *
+ * @param[in] uartp pointer to the @p UARTDriver object
+ *
+ * @notapi
+ */
+void uart_lld_start(UARTDriver *uartp) {
+
+ uartp->dmamode = STM32_DMA_CR_DMEIE | STM32_DMA_CR_TEIE;
+
+ if (uartp->state == UART_STOP) {
+#if STM32_UART_USE_USART1
+ if (&UARTD1 == uartp) {
+ bool_t b;
+ b = dmaStreamAllocate(uartp->dmarx,
+ STM32_UART_USART1_IRQ_PRIORITY,
+ (stm32_dmaisr_t)uart_lld_serve_rx_end_irq,
+ (void *)uartp);
+ chDbgAssert(!b, "uart_lld_start(), #1", "stream already allocated");
+ b = dmaStreamAllocate(uartp->dmatx,
+ STM32_UART_USART1_IRQ_PRIORITY,
+ (stm32_dmaisr_t)uart_lld_serve_tx_end_irq,
+ (void *)uartp);
+ chDbgAssert(!b, "uart_lld_start(), #2", "stream already allocated");
+ rccEnableUSART1(FALSE);
+ nvicEnableVector(USART1_IRQn,
+ CORTEX_PRIORITY_MASK(STM32_UART_USART1_IRQ_PRIORITY));
+ uartp->dmamode |= STM32_DMA_CR_CHSEL(USART1_RX_DMA_CHANNEL) |
+ STM32_DMA_CR_PL(STM32_UART_USART1_DMA_PRIORITY);
+ }
+#endif
+
+#if STM32_UART_USE_USART2
+ if (&UARTD2 == uartp) {
+ bool_t b;
+ b = dmaStreamAllocate(uartp->dmarx,
+ STM32_UART_USART2_IRQ_PRIORITY,
+ (stm32_dmaisr_t)uart_lld_serve_rx_end_irq,
+ (void *)uartp);
+ chDbgAssert(!b, "uart_lld_start(), #3", "stream already allocated");
+ b = dmaStreamAllocate(uartp->dmatx,
+ STM32_UART_USART2_IRQ_PRIORITY,
+ (stm32_dmaisr_t)uart_lld_serve_tx_end_irq,
+ (void *)uartp);
+ chDbgAssert(!b, "uart_lld_start(), #4", "stream already allocated");
+ rccEnableUSART2(FALSE);
+ nvicEnableVector(USART2_IRQn,
+ CORTEX_PRIORITY_MASK(STM32_UART_USART2_IRQ_PRIORITY));
+ uartp->dmamode |= STM32_DMA_CR_CHSEL(USART2_RX_DMA_CHANNEL) |
+ STM32_DMA_CR_PL(STM32_UART_USART2_DMA_PRIORITY);
+ }
+#endif
+
+#if STM32_UART_USE_USART3
+ if (&UARTD3 == uartp) {
+ bool_t b;
+ b = dmaStreamAllocate(uartp->dmarx,
+ STM32_UART_USART3_IRQ_PRIORITY,
+ (stm32_dmaisr_t)uart_lld_serve_rx_end_irq,
+ (void *)uartp);
+ chDbgAssert(!b, "uart_lld_start(), #5", "stream already allocated");
+ b = dmaStreamAllocate(uartp->dmatx,
+ STM32_UART_USART3_IRQ_PRIORITY,
+ (stm32_dmaisr_t)uart_lld_serve_tx_end_irq,
+ (void *)uartp);
+ chDbgAssert(!b, "uart_lld_start(), #6", "stream already allocated");
+ rccEnableUSART3(FALSE);
+ nvicEnableVector(USART3_IRQn,
+ CORTEX_PRIORITY_MASK(STM32_UART_USART3_IRQ_PRIORITY));
+ uartp->dmamode |= STM32_DMA_CR_CHSEL(USART3_RX_DMA_CHANNEL) |
+ STM32_DMA_CR_PL(STM32_UART_USART3_DMA_PRIORITY);
+ }
+#endif
+
+ /* Static DMA setup, the transfer size depends on the USART settings,
+ it is 16 bits if M=1 and PCE=0 else it is 8 bits.*/
+ if ((uartp->config->cr1 & (USART_CR1_M | USART_CR1_PCE)) == USART_CR1_M)
+ uartp->dmamode |= STM32_DMA_CR_PSIZE_HWORD | STM32_DMA_CR_MSIZE_HWORD;
+ dmaStreamSetPeripheral(uartp->dmarx, &uartp->usart->RDR);
+ dmaStreamSetPeripheral(uartp->dmatx, &uartp->usart->TDR);
+ uartp->rxbuf = 0;
+ }
+
+ uartp->rxstate = UART_RX_IDLE;
+ uartp->txstate = UART_TX_IDLE;
+ usart_start(uartp);
+}
+
+/**
+ * @brief Deactivates the UART peripheral.
+ *
+ * @param[in] uartp pointer to the @p UARTDriver object
+ *
+ * @notapi
+ */
+void uart_lld_stop(UARTDriver *uartp) {
+
+ if (uartp->state == UART_READY) {
+ usart_stop(uartp);
+ dmaStreamRelease(uartp->dmarx);
+ dmaStreamRelease(uartp->dmatx);
+
+#if STM32_UART_USE_USART1
+ if (&UARTD1 == uartp) {
+ nvicDisableVector(USART1_IRQn);
+ rccDisableUSART1(FALSE);
+ return;
+ }
+#endif
+
+#if STM32_UART_USE_USART2
+ if (&UARTD2 == uartp) {
+ nvicDisableVector(USART2_IRQn);
+ rccDisableUSART2(FALSE);
+ return;
+ }
+#endif
+
+#if STM32_UART_USE_USART3
+ if (&UARTD3 == uartp) {
+ nvicDisableVector(USART3_IRQn);
+ rccDisableUSART3(FALSE);
+ return;
+ }
+#endif
+ }
+}
+
+/**
+ * @brief Starts a transmission on the UART peripheral.
+ * @note The buffers are organized as uint8_t arrays for data sizes below
+ * or equal to 8 bits else it is organized as uint16_t arrays.
+ *
+ * @param[in] uartp pointer to the @p UARTDriver object
+ * @param[in] n number of data frames to send
+ * @param[in] txbuf the pointer to the transmit buffer
+ *
+ * @notapi
+ */
+void uart_lld_start_send(UARTDriver *uartp, size_t n, const void *txbuf) {
+
+ /* TX DMA channel preparation and start.*/
+ dmaStreamSetMemory0(uartp->dmatx, txbuf);
+ dmaStreamSetTransactionSize(uartp->dmatx, n);
+ dmaStreamSetMode(uartp->dmatx, uartp->dmamode | STM32_DMA_CR_DIR_M2P |
+ STM32_DMA_CR_MINC | STM32_DMA_CR_TCIE);
+ dmaStreamEnable(uartp->dmatx);
+}
+
+/**
+ * @brief Stops any ongoing transmission.
+ * @note Stopping a transmission also suppresses the transmission callbacks.
+ *
+ * @param[in] uartp pointer to the @p UARTDriver object
+ *
+ * @return The number of data frames not transmitted by the
+ * stopped transmit operation.
+ *
+ * @notapi
+ */
+size_t uart_lld_stop_send(UARTDriver *uartp) {
+
+ dmaStreamDisable(uartp->dmatx);
+ return dmaStreamGetTransactionSize(uartp->dmatx);
+}
+
+/**
+ * @brief Starts a receive operation on the UART peripheral.
+ * @note The buffers are organized as uint8_t arrays for data sizes below
+ * or equal to 8 bits else it is organized as uint16_t arrays.
+ *
+ * @param[in] uartp pointer to the @p UARTDriver object
+ * @param[in] n number of data frames to send
+ * @param[out] rxbuf the pointer to the receive buffer
+ *
+ * @notapi
+ */
+void uart_lld_start_receive(UARTDriver *uartp, size_t n, void *rxbuf) {
+
+ /* Stopping previous activity (idle state).*/
+ dmaStreamDisable(uartp->dmarx);
+
+ /* RX DMA channel preparation and start.*/
+ dmaStreamSetMemory0(uartp->dmarx, rxbuf);
+ dmaStreamSetTransactionSize(uartp->dmarx, n);
+ dmaStreamSetMode(uartp->dmarx, uartp->dmamode | STM32_DMA_CR_DIR_P2M |
+ STM32_DMA_CR_MINC | STM32_DMA_CR_TCIE);
+ dmaStreamEnable(uartp->dmarx);
+}
+
+/**
+ * @brief Stops any ongoing receive operation.
+ * @note Stopping a receive operation also suppresses the receive callbacks.
+ *
+ * @param[in] uartp pointer to the @p UARTDriver object
+ *
+ * @return The number of data frames not received by the
+ * stopped receive operation.
+ *
+ * @notapi
+ */
+size_t uart_lld_stop_receive(UARTDriver *uartp) {
+ size_t n;
+
+ dmaStreamDisable(uartp->dmarx);
+ n = dmaStreamGetTransactionSize(uartp->dmarx);
+ set_rx_idle_loop(uartp);
+ return n;
+}
+
+#endif /* HAL_USE_UART */
+
+/** @} */
diff --git a/os/hal/platforms/STM32/USARTv2/uart_lld.h b/os/hal/platforms/STM32/USARTv2/uart_lld.h
new file mode 100644
index 000000000..28ed61d9d
--- /dev/null
+++ b/os/hal/platforms/STM32/USARTv2/uart_lld.h
@@ -0,0 +1,408 @@
+/*
+ ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
+ 2011,2012 Giovanni Di Sirio.
+
+ This file is part of ChibiOS/RT.
+
+ ChibiOS/RT is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ ChibiOS/RT is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see .
+*/
+
+/**
+ * @file STM32/uart_lld.h
+ * @brief STM32 low level UART driver header.
+ *
+ * @addtogroup UART
+ * @{
+ */
+
+#ifndef _UART_LLD_H_
+#define _UART_LLD_H_
+
+#if HAL_USE_UART || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/**
+ * @name Configuration options
+ * @{
+ */
+/**
+ * @brief UART driver on USART1 enable switch.
+ * @details If set to @p TRUE the support for USART1 is included.
+ * @note The default is @p FALSE.
+ */
+#if !defined(STM32_UART_USE_USART1) || defined(__DOXYGEN__)
+#define STM32_UART_USE_USART1 FALSE
+#endif
+
+/**
+ * @brief UART driver on USART2 enable switch.
+ * @details If set to @p TRUE the support for USART2 is included.
+ * @note The default is @p FALSE.
+ */
+#if !defined(STM32_UART_USE_USART2) || defined(__DOXYGEN__)
+#define STM32_UART_USE_USART2 FALSE
+#endif
+
+/**
+ * @brief UART driver on USART3 enable switch.
+ * @details If set to @p TRUE the support for USART3 is included.
+ * @note The default is @p FALSE.
+ */
+#if !defined(STM32_UART_USE_USART3) || defined(__DOXYGEN__)
+#define STM32_UART_USE_USART3 FALSE
+#endif
+
+/**
+ * @brief USART1 interrupt priority level setting.
+ */
+#if !defined(STM32_UART_USART1_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_UART_USART1_IRQ_PRIORITY 12
+#endif
+
+/**
+ * @brief USART2 interrupt priority level setting.
+ */
+#if !defined(STM32_UART_USART2_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_UART_USART2_IRQ_PRIORITY 12
+#endif
+
+/**
+ * @brief USART3 interrupt priority level setting.
+ */
+#if !defined(STM32_UART_USART3_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_UART_USART3_IRQ_PRIORITY 12
+#endif
+
+/**
+ * @brief USART1 DMA priority (0..3|lowest..highest).
+ * @note The priority level is used for both the TX and RX DMA channels but
+ * because of the channels ordering the RX channel has always priority
+ * over the TX channel.
+ */
+#if !defined(STM32_UART_USART1_DMA_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_UART_USART1_DMA_PRIORITY 0
+#endif
+
+/**
+ * @brief USART2 DMA priority (0..3|lowest..highest).
+ * @note The priority level is used for both the TX and RX DMA channels but
+ * because of the channels ordering the RX channel has always priority
+ * over the TX channel.
+ */
+#if !defined(STM32_UART_USART2_DMA_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_UART_USART2_DMA_PRIORITY 0
+#endif
+
+/**
+ * @brief USART3 DMA priority (0..3|lowest..highest).
+ * @note The priority level is used for both the TX and RX DMA channels but
+ * because of the channels ordering the RX channel has always priority
+ * over the TX channel.
+ */
+#if !defined(STM32_UART_USART3_DMA_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_UART_USART3_DMA_PRIORITY 0
+#endif
+
+/**
+ * @brief USART1 DMA error hook.
+ * @note The default action for DMA errors is a system halt because DMA
+ * error can only happen because programming errors.
+ */
+#if !defined(STM32_UART_DMA_ERROR_HOOK) || defined(__DOXYGEN__)
+#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt()
+#endif
+
+/**
+ * @brief DMA stream used for USART1 RX operations.
+ * @note This option is only available on platforms with enhanced DMA.
+ */
+#if !defined(STM32_UART_USART1_RX_DMA_STREAM) || defined(__DOXYGEN__)
+#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5)
+#endif
+
+/**
+ * @brief DMA stream used for USART1 TX operations.
+ * @note This option is only available on platforms with enhanced DMA.
+ */
+#if !defined(STM32_UART_USART1_TX_DMA_STREAM) || defined(__DOXYGEN__)
+#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
+#endif
+
+/**
+ * @brief DMA stream used for USART2 RX operations.
+ * @note This option is only available on platforms with enhanced DMA.
+ */
+#if !defined(STM32_UART_USART2_RX_DMA_STREAM) || defined(__DOXYGEN__)
+#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
+#endif
+
+/**
+ * @brief DMA stream used for USART2 TX operations.
+ * @note This option is only available on platforms with enhanced DMA.
+ */
+#if !defined(STM32_UART_USART2_TX_DMA_STREAM) || defined(__DOXYGEN__)
+#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
+#endif
+
+/**
+ * @brief DMA stream used for USART3 RX operations.
+ * @note This option is only available on platforms with enhanced DMA.
+ */
+#if !defined(STM32_UART_USART3_RX_DMA_STREAM) || defined(__DOXYGEN__)
+#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1)
+#endif
+
+/**
+ * @brief DMA stream used for USART3 TX operations.
+ * @note This option is only available on platforms with enhanced DMA.
+ */
+#if !defined(STM32_UART_USART3_TX_DMA_STREAM) || defined(__DOXYGEN__)
+#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
+#endif
+/** @} */
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+#if STM32_UART_USE_USART1 && !STM32_HAS_USART1
+#error "USART1 not present in the selected device"
+#endif
+
+#if STM32_UART_USE_USART2 && !STM32_HAS_USART2
+#error "USART2 not present in the selected device"
+#endif
+
+#if STM32_UART_USE_USART3 && !STM32_HAS_USART3
+#error "USART3 not present in the selected device"
+#endif
+
+#if !STM32_UART_USE_USART1 && !STM32_UART_USE_USART2 && \
+ !STM32_UART_USE_USART3
+#error "UART driver activated but no USART/UART peripheral assigned"
+#endif
+
+#if STM32_UART_USE_USART1 && \
+ !STM32_DMA_IS_VALID_ID(STM32_UART_USART1_RX_DMA_STREAM, \
+ STM32_USART1_RX_DMA_MSK)
+#error "invalid DMA stream associated to USART1 RX"
+#endif
+
+#if STM32_UART_USE_USART1 && \
+ !STM32_DMA_IS_VALID_ID(STM32_UART_USART1_TX_DMA_STREAM, \
+ STM32_USART1_TX_DMA_MSK)
+#error "invalid DMA stream associated to USART1 TX"
+#endif
+
+#if STM32_UART_USE_USART2 && \
+ !STM32_DMA_IS_VALID_ID(STM32_UART_USART2_RX_DMA_STREAM, \
+ STM32_USART2_RX_DMA_MSK)
+#error "invalid DMA stream associated to USART2 RX"
+#endif
+
+#if STM32_UART_USE_USART2 && \
+ !STM32_DMA_IS_VALID_ID(STM32_UART_USART2_TX_DMA_STREAM, \
+ STM32_USART2_TX_DMA_MSK)
+#error "invalid DMA stream associated to USART2 TX"
+#endif
+
+#if STM32_UART_USE_USART3 && \
+ !STM32_DMA_IS_VALID_ID(STM32_UART_USART3_RX_DMA_STREAM, \
+ STM32_USART3_RX_DMA_MSK)
+#error "invalid DMA stream associated to USART3 RX"
+#endif
+
+#if STM32_UART_USE_USART3 && \
+ !STM32_DMA_IS_VALID_ID(STM32_UART_USART3_TX_DMA_STREAM, \
+ STM32_USART3_TX_DMA_MSK)
+#error "invalid DMA stream associated to USART3 TX"
+#endif
+
+#if !defined(STM32_DMA_REQUIRED)
+#define STM32_DMA_REQUIRED
+#endif
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/**
+ * @brief UART driver condition flags type.
+ */
+typedef uint32_t uartflags_t;
+
+/**
+ * @brief Structure representing an UART driver.
+ */
+typedef struct UARTDriver UARTDriver;
+
+/**
+ * @brief Generic UART notification callback type.
+ *
+ * @param[in] uartp pointer to the @p UARTDriver object
+ */
+typedef void (*uartcb_t)(UARTDriver *uartp);
+
+/**
+ * @brief Character received UART notification callback type.
+ *
+ * @param[in] uartp pointer to the @p UARTDriver object
+ * @param[in] c received character
+ */
+typedef void (*uartccb_t)(UARTDriver *uartp, uint16_t c);
+
+/**
+ * @brief Receive error UART notification callback type.
+ *
+ * @param[in] uartp pointer to the @p UARTDriver object
+ * @param[in] e receive error mask
+ */
+typedef void (*uartecb_t)(UARTDriver *uartp, uartflags_t e);
+
+/**
+ * @brief Driver configuration structure.
+ * @note It could be empty on some architectures.
+ */
+typedef struct {
+ /**
+ * @brief End of transmission buffer callback.
+ */
+ uartcb_t txend1_cb;
+ /**
+ * @brief Physical end of transmission callback.
+ */
+ uartcb_t txend2_cb;
+ /**
+ * @brief Receive buffer filled callback.
+ */
+ uartcb_t rxend_cb;
+ /**
+ * @brief Character received while out if the @p UART_RECEIVE state.
+ */
+ uartccb_t rxchar_cb;
+ /**
+ * @brief Receive error callback.
+ */
+ uartecb_t rxerr_cb;
+ /* End of the mandatory fields.*/
+ /**
+ * @brief Bit rate.
+ */
+ uint32_t speed;
+ /**
+ * @brief Initialization value for the CR1 register.
+ */
+ uint16_t cr1;
+ /**
+ * @brief Initialization value for the CR2 register.
+ */
+ uint16_t cr2;
+ /**
+ * @brief Initialization value for the CR3 register.
+ */
+ uint16_t cr3;
+} UARTConfig;
+
+/**
+ * @brief Structure representing an UART driver.
+ */
+struct UARTDriver {
+ /**
+ * @brief Driver state.
+ */
+ uartstate_t state;
+ /**
+ * @brief Transmitter state.
+ */
+ uarttxstate_t txstate;
+ /**
+ * @brief Receiver state.
+ */
+ uartrxstate_t rxstate;
+ /**
+ * @brief Current configuration data.
+ */
+ const UARTConfig *config;
+#if defined(UART_DRIVER_EXT_FIELDS)
+ UART_DRIVER_EXT_FIELDS
+#endif
+ /* End of the mandatory fields.*/
+ /**
+ * @brief Pointer to the USART registers block.
+ */
+ USART_TypeDef *usart;
+ /**
+ * @brief DMA mode bit mask.
+ */
+ uint32_t dmamode;
+ /**
+ * @brief Receive DMA channel.
+ */
+ const stm32_dma_stream_t *dmarx;
+ /**
+ * @brief Transmit DMA channel.
+ */
+ const stm32_dma_stream_t *dmatx;
+ /**
+ * @brief Default receive buffer while into @p UART_RX_IDLE state.
+ */
+ volatile uint16_t rxbuf;
+};
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+#if STM32_UART_USE_USART1 && !defined(__DOXYGEN__)
+extern UARTDriver UARTD1;
+#endif
+
+#if STM32_UART_USE_USART2 && !defined(__DOXYGEN__)
+extern UARTDriver UARTD2;
+#endif
+
+#if STM32_UART_USE_USART3 && !defined(__DOXYGEN__)
+extern UARTDriver UARTD3;
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void uart_lld_init(void);
+ void uart_lld_start(UARTDriver *uartp);
+ void uart_lld_stop(UARTDriver *uartp);
+ void uart_lld_start_send(UARTDriver *uartp, size_t n, const void *txbuf);
+ size_t uart_lld_stop_send(UARTDriver *uartp);
+ void uart_lld_start_receive(UARTDriver *uartp, size_t n, void *rxbuf);
+ size_t uart_lld_stop_receive(UARTDriver *uartp);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* HAL_USE_UART */
+
+#endif /* _UART_LLD_H_ */
+
+/** @} */
diff --git a/readme.txt b/readme.txt
index ce6a5bc86..cd1963819 100644
--- a/readme.txt
+++ b/readme.txt
@@ -175,7 +175,7 @@
support several new devices.
- NEW: Demo for STM32F0-Discovery board.
- NEW: Initial support for STM32F0xx devices, added a specific ADC driver.
- Validated EXT, GPT, ICU, PAL, PWM, Serial, SPI drivers.
+ Validated EXT, GPT, ICU, PAL, PWM, Serial, SPI, UART drivers.
- NEW: Added a common ancestor class to the SDC and MMC_SPI drivers. This
allows to share code and definitions.
- NEW: Modified the SDC driver to implement the new block devices abstract