Fixed bug #455.
git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@6680 35acf78f-673a-0410-8e92-d51de3d6d3f4master
gdisirio
parent
6459ba4c95
commit
ab1eef7452
|
|
@ -0,0 +1,108 @@
|
|||
/*
|
||||
ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
*/
|
||||
|
||||
#include "ch.h"
|
||||
#include "hal.h"
|
||||
|
||||
#if HAL_USE_PAL || defined(__DOXYGEN__)
|
||||
/**
|
||||
* @brief PAL setup.
|
||||
* @details Digital I/O ports static configuration as defined in @p board.h.
|
||||
* This variable is used by the HAL when initializing the PAL driver.
|
||||
*/
|
||||
const PALConfig pal_default_config =
|
||||
{
|
||||
{VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR,
|
||||
VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH},
|
||||
{VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR,
|
||||
VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH},
|
||||
{VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR,
|
||||
VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH},
|
||||
{VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR,
|
||||
VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH},
|
||||
{VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR,
|
||||
VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH},
|
||||
{VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR,
|
||||
VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH},
|
||||
{VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR,
|
||||
VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH},
|
||||
{VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR,
|
||||
VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH},
|
||||
{VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR,
|
||||
VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH}
|
||||
};
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Early initialization code.
|
||||
* @details This initialization must be performed just after stack setup
|
||||
* and before any other initialization.
|
||||
*/
|
||||
void __early_init(void) {
|
||||
|
||||
stm32_clock_init();
|
||||
}
|
||||
|
||||
#if HAL_USE_SDC || defined(__DOXYGEN__)
|
||||
/**
|
||||
* @brief SDC card detection.
|
||||
*/
|
||||
bool_t sdc_lld_is_card_inserted(SDCDriver *sdcp) {
|
||||
static bool_t last_status = FALSE;
|
||||
|
||||
if (blkIsTransferring(sdcp))
|
||||
return last_status;
|
||||
return last_status = (bool_t)palReadPad(GPIOC, GPIOC_SD_D3);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief SDC card write protection detection.
|
||||
*/
|
||||
bool_t sdc_lld_is_write_protected(SDCDriver *sdcp) {
|
||||
|
||||
(void)sdcp;
|
||||
return FALSE;
|
||||
}
|
||||
#endif /* HAL_USE_SDC */
|
||||
|
||||
#if HAL_USE_MMC_SPI || defined(__DOXYGEN__)
|
||||
/**
|
||||
* @brief MMC_SPI card detection.
|
||||
*/
|
||||
bool_t mmc_lld_is_card_inserted(MMCDriver *mmcp) {
|
||||
|
||||
(void)mmcp;
|
||||
/* TODO: Fill the implementation.*/
|
||||
return TRUE;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief MMC_SPI card write protection detection.
|
||||
*/
|
||||
bool_t mmc_lld_is_write_protected(MMCDriver *mmcp) {
|
||||
|
||||
(void)mmcp;
|
||||
/* TODO: Fill the implementation.*/
|
||||
return FALSE;
|
||||
}
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Board-specific initialization code.
|
||||
* @todo Add your board-specific code, if any.
|
||||
*/
|
||||
void boardInit(void) {
|
||||
}
|
||||
File diff suppressed because it is too large
Load Diff
|
|
@ -0,0 +1,5 @@
|
|||
# List of all the board related files.
|
||||
BOARDSRC = ${CHIBIOS}/boards/OLIMEX_STM32_E407_REV_CD/board.c
|
||||
|
||||
# Required include directories
|
||||
BOARDINC = ${CHIBIOS}/boards/OLIMEX_STM32_E407_REV_CD
|
||||
|
|
@ -0,0 +1,341 @@
|
|||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!-- STM32F4xx board Template -->
|
||||
<board xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
|
||||
xsi:noNamespaceSchemaLocation="http://www.chibios.org/xml/schema/boards/stm32f4xx_board.xsd">
|
||||
<configuration_settings>
|
||||
<templates_path>resources/gencfg/processors/boards/stm32f4xx/templates</templates_path>
|
||||
<output_path>..</output_path>
|
||||
</configuration_settings>
|
||||
<board_name>Olimex STM32-E407</board_name>
|
||||
<board_id>OLIMEX_STM32_E407</board_id>
|
||||
<board_functions>
|
||||
<sdc_lld_is_card_inserted><![CDATA[ static bool_t last_status = FALSE;
|
||||
|
||||
if (blkIsTransferring(sdcp))
|
||||
return last_status;
|
||||
return last_status = (bool_t)palReadPad(GPIOC, GPIOC_SD_D3);]]></sdc_lld_is_card_inserted>
|
||||
<sdc_lld_is_write_protected>
|
||||
<![CDATA[ (void)sdcp;
|
||||
return FALSE;]]></sdc_lld_is_write_protected>
|
||||
</board_functions>
|
||||
<ethernet_phy>
|
||||
<identifier>MII_LAN8710A_ID</identifier>
|
||||
<bus_type>RMII</bus_type>
|
||||
</ethernet_phy>
|
||||
<subtype>STM32F40_41xxx</subtype>
|
||||
<clocks
|
||||
HSEFrequency="12000000"
|
||||
HSEBypass="false"
|
||||
LSEFrequency="32768"
|
||||
LSEBypass="false"
|
||||
VDD="330"
|
||||
/>
|
||||
<ports>
|
||||
<GPIOA>
|
||||
<pin0 ID="BUTTON_WKUP" Type="PushPull" Speed="Maximum" Resistor="Floating"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin1 ID="ETH_RMII_REF_CLK" Type="PushPull" Speed="Maximum"
|
||||
Resistor="Floating" Level="High" Mode="Alternate" Alternate="11" />
|
||||
<pin2 ID="ETH_RMII_MDIO" Type="PushPull" Speed="Maximum"
|
||||
Resistor="Floating" Level="High" Mode="Alternate" Alternate="11" />
|
||||
<pin3 ID="ETH_RMII_MDINT" Type="PushPull" Speed="Maximum"
|
||||
Resistor="Floating" Level="High" Mode="Input" Alternate="0" />
|
||||
<pin4 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin5 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin6 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin7 ID="ETH_RMII_CRS_DV" Type="PushPull" Speed="Maximum"
|
||||
Resistor="Floating" Level="High" Mode="Alternate" Alternate="11" />
|
||||
<pin8 ID="USB_HS_BUSON" Type="PushPull" Speed="Maximum"
|
||||
Resistor="Floating" Level="High" Mode="Output" Alternate="0" />
|
||||
<pin9 ID="OTG_FS_VBUS" Type="PushPull" Speed="Maximum" Resistor="PullDown"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin10 ID="OTG_FS_ID" Type="PushPull" Speed="Maximum" Resistor="Floating"
|
||||
Level="High" Mode="Alternate" Alternate="10" />
|
||||
<pin11 ID="OTG_FS_DM" Type="PushPull" Speed="Maximum" Resistor="Floating"
|
||||
Level="High" Mode="Alternate" Alternate="10" />
|
||||
<pin12 ID="OTG_FS_DP" Type="PushPull" Speed="Maximum" Resistor="Floating"
|
||||
Level="High" Mode="Alternate" Alternate="10" />
|
||||
<pin13 ID="JTAG_TMS" Type="PushPull" Speed="Maximum" Resistor="Floating"
|
||||
Level="High" Mode="Alternate" Alternate="0" />
|
||||
<pin14 ID="JTAG_TCK" Type="PushPull" Speed="Maximum" Resistor="PullDown"
|
||||
Level="High" Mode="Alternate" Alternate="0" />
|
||||
<pin15 ID="JTAG_TDI" Type="PushPull" Speed="Maximum" Resistor="Floating"
|
||||
Level="High" Mode="Alternate" Alternate="0" />
|
||||
</GPIOA>
|
||||
<GPIOB>
|
||||
<pin0 ID="USB_FS_BUSON" Type="PushPull" Speed="Maximum"
|
||||
Resistor="Floating" Level="High" Mode="Output" Alternate="0" />
|
||||
<pin1 ID="USB_HS_FAULT" Type="PushPull" Speed="Maximum"
|
||||
Resistor="Floating" Level="High" Mode="Input" Alternate="0" />
|
||||
<pin2 ID="BOOT1" Type="PushPull" Speed="Maximum" Resistor="Floating"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin3 ID="JTAG_TDO" Type="PushPull" Speed="Maximum" Resistor="Floating"
|
||||
Level="High" Mode="Alternate" Alternate="0" />
|
||||
<pin4 ID="JTAG_TRST" Type="PushPull" Speed="Maximum" Resistor="Floating"
|
||||
Level="High" Mode="Alternate" Alternate="0" />
|
||||
<pin5 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin6 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin7 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin8 ID="I2C1_SCL" Type="OpenDrain" Speed="Maximum" Resistor="Floating"
|
||||
Level="High" Mode="Alternate" Alternate="4" />
|
||||
<pin9 ID="I2C1_SDA" Type="OpenDrain" Speed="Maximum" Resistor="Floating"
|
||||
Level="High" Mode="Alternate" Alternate="4" />
|
||||
<pin10 ID="SPI2_SCK" Type="PushPull" Speed="Maximum" Resistor="Floating"
|
||||
Level="High" Mode="Alternate" Alternate="5" />
|
||||
<pin11 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin12 ID="OTG_HS_ID" Type="PushPull" Speed="Maximum" Resistor="Floating"
|
||||
Level="High" Mode="Alternate" Alternate="12" />
|
||||
<pin13 ID="OTG_HS_VBUS" Type="PushPull" Speed="Maximum"
|
||||
Resistor="PullDown" Level="High" Mode="Input" Alternate="0" />
|
||||
<pin14 ID="OTG_HS_DM" Type="PushPull" Speed="Maximum" Resistor="Floating"
|
||||
Level="High" Mode="Alternate" Alternate="12" />
|
||||
<pin15 ID="OTG_HS_DP" Type="PushPull" Speed="Maximum" Resistor="Floating"
|
||||
Level="High" Mode="Alternate" Alternate="12" />
|
||||
</GPIOB>
|
||||
<GPIOC>
|
||||
<pin0 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin1 ID="ETH_RMII_MDC" Type="PushPull" Speed="Maximum"
|
||||
Resistor="Floating" Level="High" Mode="Alternate" Alternate="11" />
|
||||
<pin2 ID="SPI2_MISO" Type="PushPull" Speed="Maximum" Resistor="Floating"
|
||||
Level="High" Mode="Alternate" Alternate="5" />
|
||||
<pin3 ID="SPI2_MOSI" Type="PushPull" Speed="Maximum" Resistor="Floating"
|
||||
Level="High" Mode="Alternate" Alternate="5" />
|
||||
<pin4 ID="ETH_RMII_RXD0" Type="PushPull" Speed="Maximum"
|
||||
Resistor="Floating" Level="High" Mode="Alternate" Alternate="11" />
|
||||
<pin5 ID="ETH_RMII_RXD1" Type="PushPull" Speed="Maximum"
|
||||
Resistor="Floating" Level="High" Mode="Alternate" Alternate="11" />
|
||||
<pin6 ID="USART6_TX" Type="PushPull" Speed="Maximum" Resistor="Floating"
|
||||
Level="High" Mode="Alternate" Alternate="8" />
|
||||
<pin7 ID="USART6_RX" Type="PushPull" Speed="Maximum" Resistor="Floating"
|
||||
Level="High" Mode="Alternate" Alternate="8" />
|
||||
<pin8 ID="SD_D0" Type="PushPull" Speed="Maximum" Resistor="Floating"
|
||||
Level="High" Mode="Alternate" Alternate="12" />
|
||||
<pin9 ID="SD_D1" Type="PushPull" Speed="Maximum" Resistor="Floating"
|
||||
Level="High" Mode="Alternate" Alternate="12" />
|
||||
<pin10 ID="SD_D2" Type="PushPull" Speed="Maximum" Resistor="Floating"
|
||||
Level="High" Mode="Alternate" Alternate="12" />
|
||||
<pin11 ID="SD_D3" Type="PushPull" Speed="Maximum" Resistor="Floating"
|
||||
Level="High" Mode="Alternate" Alternate="12" />
|
||||
<pin12 ID="SD_CLK" Type="PushPull" Speed="Maximum" Resistor="Floating"
|
||||
Level="High" Mode="Alternate" Alternate="12" />
|
||||
<pin13 ID="LED" Type="PushPull" Speed="Maximum" Resistor="Floating"
|
||||
Level="High" Mode="Output" Alternate="0" />
|
||||
<pin14 ID="OSC32_IN" Type="PushPull" Speed="Maximum" Resistor="Floating"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin15 ID="OSC32_OUT" Type="PushPull" Speed="Maximum" Resistor="Floating"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
</GPIOC>
|
||||
<GPIOD>
|
||||
<pin0 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin1 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin2 ID="SD_CMD" Type="PushPull" Speed="Maximum" Resistor="Floating"
|
||||
Level="High" Mode="Alternate" Alternate="12" />
|
||||
<pin3 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin4 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin5 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin6 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin7 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin8 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin9 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin10 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin11 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin12 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin13 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin14 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin15 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
</GPIOD>
|
||||
<GPIOE>
|
||||
<pin0 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin1 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin2 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin3 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin4 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin5 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin6 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin7 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin8 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin9 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin10 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin11 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin12 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin13 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin14 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin15 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
</GPIOE>
|
||||
<GPIOF>
|
||||
<pin0 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin1 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin2 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin3 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin4 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin5 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin6 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin7 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin8 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin9 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin10 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin11 ID="USB_FS_FAULT" Type="PushPull" Speed="Maximum"
|
||||
Resistor="Floating" Level="High" Mode="Input" Alternate="0" />
|
||||
<pin12 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin13 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin14 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin15 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
</GPIOF>
|
||||
<GPIOG>
|
||||
<pin0 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin1 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin2 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin3 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin4 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin5 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin6 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin7 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin8 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin9 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin10 ID="SPI2_CS" Type="PushPull" Speed="Maximum" Resistor="Floating"
|
||||
Level="High" Mode="Output" Alternate="0" />
|
||||
<pin11 ID="ETH_RMII_TXEN" Type="PushPull" Speed="Maximum"
|
||||
Resistor="Floating" Level="High" Mode="Alternate" Alternate="11" />
|
||||
<pin12 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin13 ID="ETH_RMII_TXD0" Type="PushPull" Speed="Maximum"
|
||||
Resistor="Floating" Level="High" Mode="Alternate" Alternate="11" />
|
||||
<pin14 ID="ETH_RMII_TXD1" Type="PushPull" Speed="Maximum"
|
||||
Resistor="Floating" Level="High" Mode="Alternate" Alternate="11" />
|
||||
<pin15 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
</GPIOG>
|
||||
<GPIOH>
|
||||
<pin0 ID="OSC_IN" Type="PushPull" Speed="Maximum" Resistor="Floating"
|
||||
Level="High" Mode="Input" Alternate="0"></pin0>
|
||||
<pin1 ID="OSC_OUT" Type="PushPull" Speed="Maximum" Resistor="Floating"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin2 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin3 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin4 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin5 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin6 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin7 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin8 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin9 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin10 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin11 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin12 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin13 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin14 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin15 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
</GPIOH>
|
||||
<GPIOI>
|
||||
<pin0 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin1 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin2 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin3 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin4 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin5 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin6 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin7 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin8 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin9 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin10 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin11 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin12 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin13 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin14 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin15 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
</GPIOI>
|
||||
</ports>
|
||||
</board>
|
||||
|
|
@ -155,6 +155,7 @@
|
|||
#define MII_KS8721_ID 0x00221610
|
||||
#define MII_STE101P_ID 0x00061C50
|
||||
#define MII_DP83848I_ID 0x20005C90
|
||||
#define MII_LAN8710A_ID 0x0007C0F1
|
||||
|
||||
#endif /* _MII_H_ */
|
||||
|
||||
|
|
|
|||
|
|
@ -99,6 +99,7 @@
|
|||
to 2.6.3).
|
||||
- FIX: Fixed race condition in STM32 OTG driver (bug #457)(backported
|
||||
to 2.6.3).
|
||||
- FIX: Fixed add PHY id of LAN8710A (bug #455)(backported to 2.6.3).
|
||||
- FIX: Fixed memstreams.c missing from simulator makefiles (bug #454)
|
||||
(backported to 2.6.3).
|
||||
- FIX: Fixed chprintf() does not compile in strict C90 mode (bug #453)
|
||||
|
|
|
|||
Loading…
Reference in New Issue