Added board OLIMEX_STM32_103STK.
git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@3289 35acf78f-673a-0410-8e92-d51de3d6d3f4master
barthess
parent
d15f612b86
commit
6798baae96
|
|
@ -0,0 +1,54 @@
|
|||
/*
|
||||
ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
|
||||
2011 Giovanni Di Sirio.
|
||||
|
||||
This file is part of ChibiOS/RT.
|
||||
|
||||
ChibiOS/RT is free software; you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation; either version 3 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
ChibiOS/RT is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include "ch.h"
|
||||
#include "hal.h"
|
||||
|
||||
/**
|
||||
* @brief PAL setup.
|
||||
* @details Digital I/O ports static configuration as defined in @p board.h.
|
||||
* This variable is used by the HAL when initializing the PAL driver.
|
||||
*/
|
||||
#if HAL_USE_PAL || defined(__DOXYGEN__)
|
||||
const PALConfig pal_default_config =
|
||||
{
|
||||
{VAL_GPIOAODR, VAL_GPIOACRL, VAL_GPIOACRH},
|
||||
{VAL_GPIOBODR, VAL_GPIOBCRL, VAL_GPIOBCRH},
|
||||
{VAL_GPIOCODR, VAL_GPIOCCRL, VAL_GPIOCCRH},
|
||||
{VAL_GPIODODR, VAL_GPIODCRL, VAL_GPIODCRH},
|
||||
{VAL_GPIOEODR, VAL_GPIOECRL, VAL_GPIOECRH},
|
||||
};
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Early initialization code.
|
||||
* This initialization must be performed just after stack setup and before
|
||||
* any other initialization.
|
||||
*/
|
||||
void __early_init(void) {
|
||||
|
||||
stm32_clock_init();
|
||||
}
|
||||
|
||||
/*
|
||||
* Board-specific initialization code.
|
||||
*/
|
||||
void boardInit(void) {
|
||||
}
|
||||
|
|
@ -0,0 +1,162 @@
|
|||
/*
|
||||
ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
|
||||
2011 Giovanni Di Sirio.
|
||||
|
||||
This file is part of ChibiOS/RT.
|
||||
|
||||
ChibiOS/RT is free software; you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation; either version 3 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
ChibiOS/RT is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef _BOARD_H_
|
||||
#define _BOARD_H_
|
||||
|
||||
/*
|
||||
* Setup for the Olimex STM33-P103 proto board.
|
||||
*/
|
||||
|
||||
/*
|
||||
* Board identifier.
|
||||
*/
|
||||
#define BOARD_OLIMEX_STM32_103STK
|
||||
#define BOARD_NAME "Olimex STM32-103STK"
|
||||
|
||||
/*
|
||||
* Board frequencies.
|
||||
*/
|
||||
#define STM32_LSECLK 32768
|
||||
#define STM32_HSECLK 8000000
|
||||
|
||||
/*
|
||||
* MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h.
|
||||
*/
|
||||
#define STM32F10X_MD
|
||||
|
||||
/*
|
||||
* IO pins assignments.
|
||||
*/
|
||||
#define GPIOA_BUTTON_WAKEUP 0
|
||||
#define GPIOC_BUTTON_TAMPER 13
|
||||
#define GPIOC_JOY 5
|
||||
#define GPIOC_JOY_CENTER_BUT 6
|
||||
|
||||
#define GPIOA_SPI1NSS 4
|
||||
#define GPIOB_SPI2NSS 12
|
||||
|
||||
#define GPIOC_MMCWP 2
|
||||
#define GPIOC_MMCCP 1
|
||||
|
||||
#define GPIOC_USB_P 4
|
||||
#define GPIOC_LCD_RES 7
|
||||
#define GPIOC_NRF_CE 8
|
||||
#define GPIOC_NRF_IRQ 9
|
||||
#define GPIOC_LCD_E 10
|
||||
|
||||
#define GPIOC_USB_DISC 11
|
||||
#define GPIOC_LED 12
|
||||
|
||||
#define GPIOB_ACCEL_IRQ 5
|
||||
|
||||
/*
|
||||
* I/O ports initial setup, this configuration is established soon after reset
|
||||
* in the initialization code.
|
||||
*
|
||||
* The digits have the following meaning:
|
||||
* 0 - Analog input.
|
||||
* 1 - Push Pull output 10MHz.
|
||||
* 2 - Push Pull output 2MHz.
|
||||
* 3 - Push Pull output 50MHz.
|
||||
* 4 - Digital input.
|
||||
* 5 - Open Drain output 10MHz.
|
||||
* 6 - Open Drain output 2MHz.
|
||||
* 7 - Open Drain output 50MHz.
|
||||
* 8 - Digital input with PullUp or PullDown resistor depending on ODR.
|
||||
* 9 - Alternate Push Pull output 10MHz.
|
||||
* A - Alternate Push Pull output 2MHz.
|
||||
* B - Alternate Push Pull output 50MHz.
|
||||
* C - Reserved.
|
||||
* D - Alternate Open Drain output 10MHz.
|
||||
* E - Alternate Open Drain output 2MHz.
|
||||
* F - Alternate Open Drain output 50MHz.
|
||||
* Please refer to the STM32 Reference Manual for details.
|
||||
*/
|
||||
|
||||
/*
|
||||
* Port A setup.
|
||||
* Everything input with pull-up except:
|
||||
* PA0 - Normal input (BUTTON).
|
||||
* PA2 - Alternate output (USART2 TX).
|
||||
* PA3 - Normal input (USART2 RX).
|
||||
*/
|
||||
#define VAL_GPIOACRL 0x88884B84 /* PA7...PA0 */
|
||||
#define VAL_GPIOACRH 0x88888888 /* PA15...PA8 */
|
||||
#define VAL_GPIOAODR 0xFFFFFFFF
|
||||
|
||||
/*
|
||||
* Port B setup.
|
||||
* Everything input with pull-up except:
|
||||
* PB6,7 - Alternate open drain (I2C1).
|
||||
* PB10,11 - Alternate open drain (I2C2).
|
||||
* PB12 - Push Pull output (MMC SPI2 NSS).
|
||||
* PB13 - Alternate output (MMC SPI2 SCK).
|
||||
* PB14 - Normal input (MMC SPI2 MISO).
|
||||
* PB15 - Alternate output (MMC SPI2 MOSI).
|
||||
*/
|
||||
#define VAL_GPIOBCRL 0xEE888888 /* PB7...PB0 */
|
||||
#define VAL_GPIOBCRH 0xB4B3EE88 /* PB15...PB8 */
|
||||
#define VAL_GPIOBODR 0xFFFFFFFF
|
||||
|
||||
/*
|
||||
* Port C setup.
|
||||
* Everything input with pull-up except:
|
||||
* PC4 - Normal input because there is an external resistor.
|
||||
* PC5 - Analog input (joystick).
|
||||
* PC6 - Normal input because there is an external resistor.
|
||||
* PC7 - Normal input because there is an external resistor.
|
||||
* PC10 - Push Pull output (CAN CNTRL).
|
||||
* PC11 - Push Pull output (USB DISC).
|
||||
* PC12 - Open Drain output (LED).
|
||||
*/
|
||||
#define VAL_GPIOCCRL 0x44048888 /* PC7...PC0 */
|
||||
#define VAL_GPIOCCRH 0x88863388 /* PC15...PC8 */
|
||||
#define VAL_GPIOCODR 0xFFFFFFFF
|
||||
|
||||
/*
|
||||
* Port D setup.
|
||||
* Everything input with pull-up except:
|
||||
* PD0 - Normal input (XTAL).
|
||||
* PD1 - Normal input (XTAL).
|
||||
*/
|
||||
#define VAL_GPIODCRL 0x88888844 /* PD7...PD0 */
|
||||
#define VAL_GPIODCRH 0x88888888 /* PD15...PD8 */
|
||||
#define VAL_GPIODODR 0xFFFFFFFF
|
||||
|
||||
/*
|
||||
* Port E setup.
|
||||
* Everything input with pull-up except:
|
||||
*/
|
||||
#define VAL_GPIOECRL 0x88888888 /* PE7...PE0 */
|
||||
#define VAL_GPIOECRH 0x88888888 /* PE15...PE8 */
|
||||
#define VAL_GPIOEODR 0xFFFFFFFF
|
||||
|
||||
#if !defined(_FROM_ASM_)
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
void boardInit(void);
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
#endif /* _FROM_ASM_ */
|
||||
|
||||
#endif /* _BOARD_H_ */
|
||||
|
|
@ -0,0 +1,5 @@
|
|||
# List of all the board related files.
|
||||
BOARDSRC = ${CHIBIOS}/boards/OLIMEX_STM32_103STK/board.c
|
||||
|
||||
# Required include directories
|
||||
BOARDINC = ${CHIBIOS}/boards/OLIMEX_STM32_103STK
|
||||
Loading…
Reference in New Issue