diff --git a/os/hal/include/mii.h b/os/hal/include/mii.h index 0ae3a9b30..e0a86217a 100644 --- a/os/hal/include/mii.h +++ b/os/hal/include/mii.h @@ -40,9 +40,12 @@ #define MII_ADVERTISE 0x04 /**< Advertisement control reg. */ #define MII_LPA 0x05 /**< Link partner ability reg. */ #define MII_EXPANSION 0x06 /**< Expansion register. */ +#define MII_ANNPTR 0x07 /**< 1000BASE-T control. */ #define MII_CTRL1000 0x09 /**< 1000BASE-T control. */ #define MII_STAT1000 0x0a /**< 1000BASE-T status. */ #define MII_ESTATUS 0x0f /**< Extended Status. */ +#define MII_PHYSTS 0x10 /**< PHY Status register. */ +#define MII_MICR 0x11 /**< MII Interrupt ctrl register. */ #define MII_DCOUNTER 0x12 /**< Disconnect counter. */ #define MII_FCSCOUNTER 0x13 /**< False carrier counter. */ #define MII_NWAYTEST 0x14 /**< N-way auto-neg test reg. */ @@ -52,14 +55,13 @@ #define MII_LBRERROR 0x18 /**< Lpback, rx, bypass error. */ #define MII_PHYADDR 0x19 /**< PHY address. */ #define MII_RESV2 0x1a /**< Reserved. */ -#define MII_TPISTATUS 0x1b /**< TPI status for 10mbps. */ +#define MII_TPISTATUS 0x1b /**< TPI status for 10Mbps. */ #define MII_NCONFIG 0x1c /**< Network interface config. */ /* * Basic mode control register. */ -#define BMCR_RESV 0x003f /**< Unused. */ -#define BMCR_SPEED1000 0x0040 /**< MSB of Speed (1000). */ +#define BMCR_RESV 0x007f /**< Unused. */ #define BMCR_CTST 0x0080 /**< Collision test. */ #define BMCR_FULLDPLX 0x0100 /**< Full duplex. */ #define BMCR_ANRESTART 0x0200 /**< Auto negotiation restart. */ @@ -67,7 +69,7 @@ #define BMCR_PDOWN 0x0800 /**< Powerdown. */ #define BMCR_ANENABLE 0x1000 /**< Enable auto negotiation. */ #define BMCR_SPEED100 0x2000 /**< Select 100Mbps. */ -#define BMCR_LOOPBACK 0x4000 /**< TXD loopback bits. */ +#define BMCR_LOOPBACK 0x4000 /**< TXD loopback bit. */ #define BMCR_RESET 0x8000 /**< Reset. */ /* @@ -79,10 +81,8 @@ #define BMSR_ANEGCAPABLE 0x0008 /**< Able to do auto-negotiation. */ #define BMSR_RFAULT 0x0010 /**< Remote fault detected. */ #define BMSR_ANEGCOMPLETE 0x0020 /**< Auto-negotiation complete. */ -#define BMSR_RESV 0x00c0 /**< Unused. */ -#define BMSR_ESTATEN 0x0100 /**< Extended Status in R15. */ -#define BMSR_100HALF2 0x0200 /**< Can do 100BASE-T2 HDX. */ -#define BMSR_100FULL2 0x0400 /**< Can do 100BASE-T2 FDX. */ +#define BMSR_MFPRESUPPCAP 0x0040 /**< Able to suppress preamble. */ +#define BMSR_RESV 0x0780 /**< Unused. */ #define BMSR_10HALF 0x0800 /**< Can do 10mbps, half-duplex. */ #define BMSR_10FULL 0x1000 /**< Can do 10mbps, full-duplex. */ #define BMSR_100HALF 0x2000 /**< Can do 100mbps, half-duplex. */ @@ -95,13 +95,9 @@ #define ADVERTISE_SLCT 0x001f /**< Selector bits. */ #define ADVERTISE_CSMA 0x0001 /**< Only selector supported. */ #define ADVERTISE_10HALF 0x0020 /**< Try for 10mbps half-duplex. */ -#define ADVERTISE_1000XFULL 0x0020 /**< Try for 1000BASE-X full-duplex.*/ #define ADVERTISE_10FULL 0x0040 /**< Try for 10mbps full-duplex. */ -#define ADVERTISE_1000XHALF 0x0040 /**< Try for 1000BASE-X half-duplex.*/ #define ADVERTISE_100HALF 0x0080 /**< Try for 100mbps half-duplex. */ -#define ADVERTISE_1000XPAUSE 0x0080 /**< Try for 1000BASE-X pause. */ #define ADVERTISE_100FULL 0x0100 /**< Try for 100mbps full-duplex. */ -#define ADVERTISE_1000XPSE_ASYM 0x0100 /**< Try for 1000BASE-X asym pause. */ #define ADVERTISE_100BASE4 0x0200 /**< Try for 100mbps 4k packets. */ #define ADVERTISE_PAUSE_CAP 0x0400 /**< Try for pause. */ #define ADVERTISE_PAUSE_ASYM 0x0800 /**< Try for asymetric pause. */ @@ -120,13 +116,9 @@ */ #define LPA_SLCT 0x001f /**< Same as advertise selector. */ #define LPA_10HALF 0x0020 /**< Can do 10mbps half-duplex. */ -#define LPA_1000XFULL 0x0020 /**< Can do 1000BASE-X full-duplex. */ #define LPA_10FULL 0x0040 /**< Can do 10mbps full-duplex. */ -#define LPA_1000XHALF 0x0040 /**< Can do 1000BASE-X half-duplex. */ #define LPA_100HALF 0x0080 /**< Can do 100mbps half-duplex. */ -#define LPA_1000XPAUSE 0x0080 /**< Can do 1000BASE-X pause. */ #define LPA_100FULL 0x0100 /**< Can do 100mbps full-duplex. */ -#define LPA_1000XPAUSE_ASYM 0x0100 /**< Can do 1000BASE-X pause asym. */ #define LPA_100BASE4 0x0200 /**< Can do 100mbps 4k packets. */ #define LPA_PAUSE_CAP 0x0400 /**< Can pause. */ #define LPA_PAUSE_ASYM 0x0800 /**< Can pause asymetrically. */ @@ -148,9 +140,6 @@ #define EXPANSION_MFAULTS 0x0010 /**< Multiple faults detected. */ #define EXPANSION_RESV 0xffe0 /**< Unused. */ -#define ESTATUS_1000_TFULL 0x2000 /**< Can do 1000BT Full. */ -#define ESTATUS_1000_THALF 0x1000 /**< Can do 1000BT Half. */ - /* * N-way test register. */ @@ -158,20 +147,6 @@ #define NWAYTEST_LOOPBACK 0x0100 /**< Enable loopback for N-way. */ #define NWAYTEST_RESV2 0xfe00 /**< Unused. */ -/* - * 1000BASE-T Control register. - */ -#define ADVERTISE_1000FULL 0x0200 /**< Advertise 1000BASE-T full duplex.*/ -#define ADVERTISE_1000HALF 0x0100 /**< Advertise 1000BASE-T half duplex.*/ - -/* - * 1000BASE-T Status register. - */ -#define LPA_1000LOCALRXOK 0x2000 /**< Link partner local receiver status.*/ -#define LPA_1000REMRXOK 0x1000 /**< Link partner remote receiver status.*/ -#define LPA_1000FULL 0x0800 /**< Link partner 1000BASE-T full duplex.*/ -#define LPA_1000HALF 0x0400 /**< Link partner 1000BASE-T half duplex.*/ - /* * PHY identifiers. */ @@ -179,6 +154,7 @@ #define MII_AM79C875_ID 0x00225540 #define MII_KS8721_ID 0x00221610 #define MII_STE101P_ID 0x00061C50 +#define MII_DP84848I_ID 0x20005C90 #endif /* _MII_H_ */