352 lines
11 KiB
C
352 lines
11 KiB
C
|
/*
|
||
|
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
|
||
|
|
||
|
Licensed under the Apache License, Version 2.0 (the "License");
|
||
|
you may not use this file except in compliance with the License.
|
||
|
You may obtain a copy of the License at
|
||
|
|
||
|
http://www.apache.org/licenses/LICENSE-2.0
|
||
|
|
||
|
Unless required by applicable law or agreed to in writing, software
|
||
|
distributed under the License is distributed on an "AS IS" BASIS,
|
||
|
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||
|
See the License for the specific language governing permissions and
|
||
|
limitations under the License.
|
||
|
*/
|
||
|
|
||
|
/**
|
||
|
* @file i2s_lld.h
|
||
|
* @brief STM32 I2S subsystem low level driver header.
|
||
|
*
|
||
|
* @addtogroup I2S
|
||
|
* @{
|
||
|
*/
|
||
|
|
||
|
#ifndef _I2S_LLD_H_
|
||
|
#define _I2S_LLD_H_
|
||
|
|
||
|
#if HAL_USE_I2S || defined(__DOXYGEN__)
|
||
|
|
||
|
/*===========================================================================*/
|
||
|
/* Driver constants. */
|
||
|
/*===========================================================================*/
|
||
|
|
||
|
/**
|
||
|
* @name Static I2S modes
|
||
|
* @{
|
||
|
*/
|
||
|
#define STM32_I2S_MODE_SLAVE 0
|
||
|
#define STM32_I2S_MODE_MASTER 1
|
||
|
#define STM32_I2S_MODE_RX 2
|
||
|
#define STM32_I2S_MODE_TX 4
|
||
|
#define STM32_I2S_MODE_RXTX (STM32_I2S_MODE_RX | \
|
||
|
STM32_I2S_MODE_TX)
|
||
|
/** @} */
|
||
|
|
||
|
/**
|
||
|
* @name Mode checks
|
||
|
* @{
|
||
|
*/
|
||
|
#define STM32_I2S_IS_MASTER(mode) ((mode) & STM32_I2S_MODE_MASTER)
|
||
|
#define STM32_I2S_RX_ENABLED(mode) ((mode) & STM32_I2S_MODE_RX)
|
||
|
#define STM32_I2S_TX_ENABLED(mode) ((mode) & STM32_I2S_MODE_TX)
|
||
|
/** @} */
|
||
|
|
||
|
/*===========================================================================*/
|
||
|
/* Driver pre-compile time settings. */
|
||
|
/*===========================================================================*/
|
||
|
|
||
|
/**
|
||
|
* @name Configuration options
|
||
|
* @{
|
||
|
*/
|
||
|
/**
|
||
|
* @brief I2S1 driver enable switch.
|
||
|
* @details If set to @p TRUE the support for I2S1 is included.
|
||
|
* @note The default is @p TRUE.
|
||
|
*/
|
||
|
#if !defined(STM32_I2S_USE_SPI1) || defined(__DOXYGEN__)
|
||
|
#define STM32_I2S_USE_SPI1 FALSE
|
||
|
#endif
|
||
|
|
||
|
/**
|
||
|
* @brief I2S2 driver enable switch.
|
||
|
* @details If set to @p TRUE the support for I2S2 is included.
|
||
|
* @note The default is @p TRUE.
|
||
|
*/
|
||
|
#if !defined(STM32_I2S_USE_SPI2) || defined(__DOXYGEN__)
|
||
|
#define STM32_I2S_USE_SPI2 FALSE
|
||
|
#endif
|
||
|
|
||
|
/**
|
||
|
* @brief I2S1 mode.
|
||
|
*/
|
||
|
#if !defined(STM32_I2S_SPI1_MODE) || defined(__DOXYGEN__)
|
||
|
#define STM32_I2S_SPI1_MODE (STM32_I2S_MODE_MASTER | \
|
||
|
STM32_I2S_MODE_RX)
|
||
|
#endif
|
||
|
|
||
|
/**
|
||
|
* @brief I2S2 mode.
|
||
|
*/
|
||
|
#if !defined(STM32_I2S_SPI2_MODE) || defined(__DOXYGEN__)
|
||
|
#define STM32_I2S_SPI2_MODE (STM32_I2S_MODE_MASTER | \
|
||
|
STM32_I2S_MODE_RX)
|
||
|
#endif
|
||
|
|
||
|
/**
|
||
|
* @brief I2S1 interrupt priority level setting.
|
||
|
*/
|
||
|
#if !defined(STM32_I2S_SPI1_IRQ_PRIORITY) || defined(__DOXYGEN__)
|
||
|
#define STM32_I2S_SPI1_IRQ_PRIORITY 2
|
||
|
#endif
|
||
|
|
||
|
/**
|
||
|
* @brief I2S2 interrupt priority level setting.
|
||
|
*/
|
||
|
#if !defined(STM32_I2S_SPI2_IRQ_PRIORITY) || defined(__DOXYGEN__)
|
||
|
#define STM32_I2S_SPI2_IRQ_PRIORITY 2
|
||
|
#endif
|
||
|
|
||
|
/**
|
||
|
* @brief I2S1 DMA priority (0..3|lowest..highest).
|
||
|
*/
|
||
|
#if !defined(STM32_I2S_SPI1_DMA_PRIORITY) || defined(__DOXYGEN__)
|
||
|
#define STM32_I2S_SPI1_DMA_PRIORITY 1
|
||
|
#endif
|
||
|
|
||
|
/**
|
||
|
* @brief I2S2 DMA priority (0..3|lowest..highest).
|
||
|
*/
|
||
|
#if !defined(STM32_I2S_SPI2_DMA_PRIORITY) || defined(__DOXYGEN__)
|
||
|
#define STM32_I2S_SPI2_DMA_PRIORITY 1
|
||
|
#endif
|
||
|
|
||
|
/**
|
||
|
* @brief I2S DMA error hook.
|
||
|
*/
|
||
|
#if !defined(STM32_I2S_DMA_ERROR_HOOK) || defined(__DOXYGEN__)
|
||
|
#define STM32_I2S_DMA_ERROR_HOOK(i2sp) osalSysHalt("DMA failure")
|
||
|
#endif
|
||
|
/** @} */
|
||
|
|
||
|
/*===========================================================================*/
|
||
|
/* Derived constants and error checks. */
|
||
|
/*===========================================================================*/
|
||
|
|
||
|
#if STM32_I2S_RX_ENABLED(STM32_I2S_SPI1_MODE) && \
|
||
|
STM32_I2S_TX_ENABLED(STM32_I2S_SPI1_MODE)
|
||
|
#error "I2S1 RX and TX mode not supported in this driver implementation"
|
||
|
#endif
|
||
|
|
||
|
#if STM32_I2S_RX_ENABLED(STM32_I2S_SPI2_MODE) && \
|
||
|
STM32_I2S_TX_ENABLED(STM32_I2S_SPI2_MODE)
|
||
|
#error "I2S2 RX and TX mode not supported in this driver implementation"
|
||
|
#endif
|
||
|
|
||
|
#if STM32_I2S_USE_SPI1 && !STM32_HAS_SPI1
|
||
|
#error "SPI1 not present in the selected device"
|
||
|
#endif
|
||
|
|
||
|
#if STM32_I2S_USE_SPI2 && !STM32_HAS_SPI2
|
||
|
#error "SPI2 not present in the selected device"
|
||
|
#endif
|
||
|
|
||
|
#if !STM32_I2S_USE_SPI1 && !STM32_I2S_USE_SPI2
|
||
|
#error "I2S driver activated but no SPI peripheral assigned"
|
||
|
#endif
|
||
|
|
||
|
#if STM32_I2S_USE_SPI1 && \
|
||
|
!OSAL_IRQ_IS_VALID_PRIORITY(STM32_I2S_SPI1_IRQ_PRIORITY)
|
||
|
#error "Invalid IRQ priority assigned to SPI1"
|
||
|
#endif
|
||
|
|
||
|
#if STM32_I2S_USE_SPI2 && \
|
||
|
!OSAL_IRQ_IS_VALID_PRIORITY(STM32_I2S_SPI2_IRQ_PRIORITY)
|
||
|
#error "Invalid IRQ priority assigned to SPI2"
|
||
|
#endif
|
||
|
|
||
|
#if STM32_I2S_USE_SPI1 && \
|
||
|
!STM32_DMA_IS_VALID_PRIORITY(STM32_I2S_SPI1_DMA_PRIORITY)
|
||
|
#error "Invalid DMA priority assigned to SPI1"
|
||
|
#endif
|
||
|
|
||
|
#if STM32_I2S_USE_SPI2 && \
|
||
|
!STM32_DMA_IS_VALID_PRIORITY(STM32_I2S_SPI2_DMA_PRIORITY)
|
||
|
#error "Invalid DMA priority assigned to SPI2"
|
||
|
#endif
|
||
|
|
||
|
/* The following checks are only required when there is a DMA able to
|
||
|
reassign streams to different channels.*/
|
||
|
#if STM32_ADVANCED_DMA
|
||
|
/* Check on the presence of the DMA streams settings in mcuconf.h.*/
|
||
|
#if STM32_I2S_USE_SPI1 && (!defined(STM32_I2S_SPI1_RX_DMA_STREAM) || \
|
||
|
!defined(STM32_I2S_SPI1_TX_DMA_STREAM))
|
||
|
#error "SPI1 DMA streams not defined"
|
||
|
#endif
|
||
|
|
||
|
#if STM32_I2S_USE_SPI2 && (!defined(STM32_I2S_SPI2_RX_DMA_STREAM) || \
|
||
|
!defined(STM32_I2S_SPI2_TX_DMA_STREAM))
|
||
|
#error "SPI2 DMA streams not defined"
|
||
|
#endif
|
||
|
|
||
|
/* Check on the validity of the assigned DMA channels.*/
|
||
|
#if STM32_I2S_USE_SPI1 && \
|
||
|
!STM32_DMA_IS_VALID_ID(STM32_I2S_SPI1_RX_DMA_STREAM, STM32_SPI1_RX_DMA_MSK)
|
||
|
#error "invalid DMA stream associated to SPI1 RX"
|
||
|
#endif
|
||
|
|
||
|
#if STM32_I2S_USE_SPI1 && \
|
||
|
!STM32_DMA_IS_VALID_ID(STM32_I2S_SPI1_TX_DMA_STREAM, STM32_SPI1_TX_DMA_MSK)
|
||
|
#error "invalid DMA stream associated to SPI1 TX"
|
||
|
#endif
|
||
|
|
||
|
#if STM32_I2S_USE_SPI2 && \
|
||
|
!STM32_DMA_IS_VALID_ID(STM32_I2S_SPI2_RX_DMA_STREAM, STM32_SPI2_RX_DMA_MSK)
|
||
|
#error "invalid DMA stream associated to SPI2 RX"
|
||
|
#endif
|
||
|
|
||
|
#if STM32_I2S_USE_SPI2 && \
|
||
|
!STM32_DMA_IS_VALID_ID(STM32_I2S_SPI2_TX_DMA_STREAM, STM32_SPI2_TX_DMA_MSK)
|
||
|
#error "invalid DMA stream associated to SPI2 TX"
|
||
|
#endif
|
||
|
#endif /* STM32_ADVANCED_DMA */
|
||
|
|
||
|
#if !defined(STM32_DMA_REQUIRED)
|
||
|
#define STM32_DMA_REQUIRED
|
||
|
#endif
|
||
|
|
||
|
/*===========================================================================*/
|
||
|
/* Driver data structures and types. */
|
||
|
/*===========================================================================*/
|
||
|
|
||
|
/**
|
||
|
* @brief Type of a structure representing an I2S driver.
|
||
|
*/
|
||
|
typedef struct I2SDriver I2SDriver;
|
||
|
|
||
|
/**
|
||
|
* @brief I2S notification callback type.
|
||
|
*
|
||
|
* @param[in] i2sp pointer to the @p I2SDriver object
|
||
|
* @param[in] offset offset in buffers of the data to read/write
|
||
|
* @param[in] n number of samples to read/write
|
||
|
*/
|
||
|
typedef void (*i2scallback_t)(I2SDriver *i2sp, size_t offset, size_t n);
|
||
|
|
||
|
/**
|
||
|
* @brief Driver configuration structure.
|
||
|
* @note It could be empty on some architectures.
|
||
|
*/
|
||
|
typedef struct {
|
||
|
/**
|
||
|
* @brief Transmission buffer pointer.
|
||
|
* @note Can be @p NULL if TX is not required.
|
||
|
*/
|
||
|
const void *tx_buffer;
|
||
|
/**
|
||
|
* @brief Receive buffer pointer.
|
||
|
* @note Can be @p NULL if RX is not required.
|
||
|
*/
|
||
|
void *rx_buffer;
|
||
|
/**
|
||
|
* @brief TX and RX buffers size as number of samples.
|
||
|
*/
|
||
|
size_t size;
|
||
|
/**
|
||
|
* @brief Callback function called during streaming.
|
||
|
*/
|
||
|
i2scallback_t end_cb;
|
||
|
/* End of the mandatory fields.*/
|
||
|
/**
|
||
|
* @brief Configuration of the I2SCFGR register.
|
||
|
* @details See the STM32 reference manual, this register is used for
|
||
|
* the I2S configuration, the following bits must not be
|
||
|
* specified because handled directly by the driver:
|
||
|
* - I2SMOD
|
||
|
* - I2SE
|
||
|
* - I2SCFG
|
||
|
* .
|
||
|
*/
|
||
|
int16_t i2scfgr;
|
||
|
/**
|
||
|
* @brief Configuration of the I2SPR register.
|
||
|
* @details See the STM32 reference manual, this register is used for
|
||
|
* the I2S clock setup.
|
||
|
*/
|
||
|
int16_t i2spr;
|
||
|
} I2SConfig;
|
||
|
|
||
|
/**
|
||
|
* @brief Structure representing an I2S driver.
|
||
|
*/
|
||
|
struct I2SDriver {
|
||
|
/**
|
||
|
* @brief Driver state.
|
||
|
*/
|
||
|
i2sstate_t state;
|
||
|
/**
|
||
|
* @brief Current configuration data.
|
||
|
*/
|
||
|
const I2SConfig *config;
|
||
|
/* End of the mandatory fields.*/
|
||
|
/**
|
||
|
* @brief Pointer to the SPIx registers block.
|
||
|
*/
|
||
|
SPI_TypeDef *spi;
|
||
|
/**
|
||
|
* @brief Calculated part of the I2SCFGR register.
|
||
|
*/
|
||
|
uint16_t cfg;
|
||
|
/**
|
||
|
* @brief Receive DMA stream or @p NULL.
|
||
|
*/
|
||
|
const stm32_dma_stream_t *dmarx;
|
||
|
/**
|
||
|
* @brief Transmit DMA stream or @p NULL.
|
||
|
*/
|
||
|
const stm32_dma_stream_t *dmatx;
|
||
|
/**
|
||
|
* @brief RX DMA mode bit mask.
|
||
|
*/
|
||
|
uint32_t rxdmamode;
|
||
|
/**
|
||
|
* @brief TX DMA mode bit mask.
|
||
|
*/
|
||
|
uint32_t txdmamode;
|
||
|
};
|
||
|
|
||
|
/*===========================================================================*/
|
||
|
/* Driver macros. */
|
||
|
/*===========================================================================*/
|
||
|
|
||
|
/*===========================================================================*/
|
||
|
/* External declarations. */
|
||
|
/*===========================================================================*/
|
||
|
|
||
|
#if STM32_I2S_USE_SPI1 && !defined(__DOXYGEN__)
|
||
|
extern I2SDriver I2SD1;
|
||
|
#endif
|
||
|
|
||
|
#if STM32_I2S_USE_SPI2 && !defined(__DOXYGEN__)
|
||
|
extern I2SDriver I2SD2;
|
||
|
#endif
|
||
|
|
||
|
#ifdef __cplusplus
|
||
|
extern "C" {
|
||
|
#endif
|
||
|
void i2s_lld_init(void);
|
||
|
void i2s_lld_start(I2SDriver *i2sp);
|
||
|
void i2s_lld_stop(I2SDriver *i2sp);
|
||
|
void i2s_lld_start_exchange(I2SDriver *i2sp);
|
||
|
void i2s_lld_stop_exchange(I2SDriver *i2sp);
|
||
|
#ifdef __cplusplus
|
||
|
}
|
||
|
#endif
|
||
|
|
||
|
#endif /* HAL_USE_I2S */
|
||
|
|
||
|
#endif /* _I2S_LLD_H_ */
|
||
|
|
||
|
/** @} */
|