tinySA/os/hal/templates/can_lld.h

256 lines
8.5 KiB
C
Raw Normal View History

/*
ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/**
* @file templates/can_lld.h
* @brief CAN Driver subsystem low level driver header template.
*
* @addtogroup CAN
* @{
*/
#ifndef _CAN_LLD_H_
#define _CAN_LLD_H_
#if HAL_USE_CAN || defined(__DOXYGEN__)
/*===========================================================================*/
/* Driver constants. */
/*===========================================================================*/
/**
* @brief This switch defines whether the driver implementation supports
* a low power switch mode with automatic an wakeup feature.
*/
#define CAN_SUPPORTS_SLEEP TRUE
/**
* @brief This implementation supports three transmit mailboxes.
*/
#define CAN_TX_MAILBOXES 3
/**
* @brief This implementation supports two receive mailboxes.
*/
#define CAN_RX_MAILBOXES 2
/*===========================================================================*/
/* Driver pre-compile time settings. */
/*===========================================================================*/
/**
* @name Configuration options
* @{
*/
/**
* @brief CAN1 driver enable switch.
* @details If set to @p TRUE the support for CAN1 is included.
*/
#if !defined(PLATFORM_CAN_USE_CAN1) || defined(__DOXYGEN__)
#define PLATFORM_CAN_USE_CAN1 FALSE
#endif
/** @} */
/*===========================================================================*/
/* Derived constants and error checks. */
/*===========================================================================*/
#if CAN_USE_SLEEP_MODE && !CAN_SUPPORTS_SLEEP
#error "CAN sleep mode not supported in this architecture"
#endif
/*===========================================================================*/
/* Driver data structures and types. */
/*===========================================================================*/
/**
* @brief Type of a transmission mailbox index.
*/
typedef uint32_t canmbx_t;
/**
* @brief CAN transmission frame.
* @note Accessing the frame data as word16 or word32 is not portable because
* machine data endianness, it can be still useful for a quick filling.
*/
typedef struct {
struct {
uint8_t DLC:4; /**< @brief Data length. */
uint8_t RTR:1; /**< @brief Frame type. */
uint8_t IDE:1; /**< @brief Identifier type. */
};
union {
struct {
uint32_t SID:11; /**< @brief Standard identifier.*/
};
struct {
uint32_t EID:29; /**< @brief Extended identifier.*/
};
};
union {
uint8_t data8[8]; /**< @brief Frame data. */
uint16_t data16[4]; /**< @brief Frame data. */
uint32_t data32[2]; /**< @brief Frame data. */
};
} CANTxFrame;
/**
* @brief CAN received frame.
* @note Accessing the frame data as word16 or word32 is not portable because
* machine data endianness, it can be still useful for a quick filling.
*/
typedef struct {
struct {
uint8_t DLC:4; /**< @brief Data length. */
uint8_t RTR:1; /**< @brief Frame type. */
uint8_t IDE:1; /**< @brief Identifier type. */
};
union {
struct {
uint32_t SID:11; /**< @brief Standard identifier.*/
};
struct {
uint32_t EID:29; /**< @brief Extended identifier.*/
};
};
union {
uint8_t data8[8]; /**< @brief Frame data. */
uint16_t data16[4]; /**< @brief Frame data. */
uint32_t data32[2]; /**< @brief Frame data. */
};
} CANRxFrame;
/**
* @brief CAN filter.
* @note Implementations may extend this structure to contain more,
* architecture dependent, fields.
* @note It could not be present on some architectures.
*/
typedef struct {
uint32_t dummy;
} CANFilter;
/**
* @brief Driver configuration structure.
* @note Implementations may extend this structure to contain more,
* architecture dependent, fields.
* @note It could be empty on some architectures.
*/
typedef struct {
uint32_t dummy;
} CANConfig;
/**
* @brief Structure representing an CAN driver.
*/
typedef struct {
/**
* @brief Driver state.
*/
canstate_t state;
/**
* @brief Current configuration data.
*/
const CANConfig *config;
/**
* @brief Transmission queue semaphore.
*/
Semaphore txsem;
/**
* @brief Receive queue semaphore.
*/
Semaphore rxsem;
/**
* @brief One or more frames become available.
* @note After broadcasting this event it will not be broadcasted again
* until the received frames queue has been completely emptied. It
* is <b>not</b> broadcasted for each received frame. It is
* responsibility of the application to empty the queue by
* repeatedly invoking @p chReceive() when listening to this event.
* This behavior minimizes the interrupt served by the system
* because CAN traffic.
* @note The flags associated to the listeners will indicate which
* receive mailboxes become non-empty.
*/
EventSource rxfull_event;
/**
* @brief One or more transmission mailbox become available.
* @note The flags associated to the listeners will indicate which
* transmit mailboxes become empty.
*
*/
EventSource txempty_event;
/**
* @brief A CAN bus error happened.
* @note The flags associated to the listeners will indicate the
* error(s) that have occurred.
*/
EventSource error_event;
#if CAN_USE_SLEEP_MODE || defined (__DOXYGEN__)
/**
* @brief Entering sleep state event.
*/
EventSource sleep_event;
/**
* @brief Exiting sleep state event.
*/
EventSource wakeup_event;
#endif /* CAN_USE_SLEEP_MODE */
/* End of the mandatory fields.*/
} CANDriver;
/*===========================================================================*/
/* Driver macros. */
/*===========================================================================*/
/*===========================================================================*/
/* External declarations. */
/*===========================================================================*/
#if PLATFORM_CAN_USE_CAN1 && !defined(__DOXYGEN__)
extern CANDriver CAND1;
#endif
#ifdef __cplusplus
extern "C" {
#endif
void can_lld_init(void);
void can_lld_start(CANDriver *canp);
void can_lld_stop(CANDriver *canp);
bool_t can_lld_is_tx_empty(CANDriver *canp,
canmbx_t mailbox);
void can_lld_transmit(CANDriver *canp,
canmbx_t mailbox,
const CANTxFrame *crfp);
bool_t can_lld_is_rx_nonempty(CANDriver *canp,
canmbx_t mailbox);
void can_lld_receive(CANDriver *canp,
canmbx_t mailbox,
CANRxFrame *ctfp);
#if CAN_USE_SLEEP_MODE
void can_lld_sleep(CANDriver *canp);
void can_lld_wakeup(CANDriver *canp);
#endif /* CAN_USE_SLEEP_MODE */
#ifdef __cplusplus
}
#endif
#endif /* HAL_USE_CAN */
#endif /* _CAN_LLD_H_ */
/** @} */