tinySA/os/hal/platforms/SPC560BCxx/hal_lld.c

/*
    SPC5 HAL - Copyright (C) 2013 STMicroelectronics

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at

        http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.
*/

/**
 * @file    SPC560BCxx/hal_lld.c
 * @brief   SPC560B/Cxx HAL subsystem low level driver source.
 *
 * @addtogroup HAL
 * @{
 */

#include "ch.h"
#include "hal.h"

/*===========================================================================*/
/* Driver exported variables.                                                */
/*===========================================================================*/

/*===========================================================================*/
/* Driver local variables and types.                                         */
/*===========================================================================*/

/*===========================================================================*/
/* Driver local functions.                                                   */
/*===========================================================================*/

/*===========================================================================*/
/* Driver interrupt handlers.                                                */
/*===========================================================================*/

/**
 * @brief   PIT channel 3 interrupt handler.
 *
 * @isr
 */
CH_IRQ_HANDLER(vector59) {

  CH_IRQ_PROLOGUE();

  chSysLockFromIsr();
  chSysTimerHandlerI();
  chSysUnlockFromIsr();

  /* Resets the PIT channel 3 IRQ flag.*/
  PIT.CH[0].TFLG.R = 1;

  CH_IRQ_EPILOGUE();
}

/*===========================================================================*/
/* Driver exported functions.                                                */
/*===========================================================================*/

/**
 * @brief   Low level HAL driver initialization.
 *
 * @notapi
 */
void hal_lld_init(void) {
  uint32_t reg;

  /* The system is switched to the RUN0 mode, the default for normal
     operations.*/
  if (halSPCSetRunMode(SPC5_RUNMODE_RUN0) == CH_FAILED) {
    SPC5_CLOCK_FAILURE_HOOK();
  }

  /* INTC initialization, software vector mode, 4 bytes vectors, starting
     at priority 0.*/
  INTC.MCR.R        = 0;
  INTC.CPR.R        = 0;
  INTC.IACKR.R      = (uint32_t)_vectors;

  /* PIT channel 0 initialization for Kernel ticks, the PIT is configured
     to run in DRUN,RUN0...RUN3 and HALT0 modes, the clock is gated in other
     modes.*/
  INTC.PSR[59].R    = SPC5_PIT0_IRQ_PRIORITY;
  halSPCSetPeripheralClockMode(92,
                               SPC5_ME_PCTL_RUN(2) | SPC5_ME_PCTL_LP(2));
  reg = halSPCGetSystemClock() / CH_FREQUENCY - 1;
  PIT.PITMCR.R      = 1;        /* PIT clock enabled, stop while debugging. */
  PIT.CH[0].LDVAL.R = reg;
  PIT.CH[0].CVAL.R  = reg;
  PIT.CH[0].TFLG.R  = 1;        /* Interrupt flag cleared.                  */
  PIT.CH[0].TCTRL.R = 3;        /* Timer active, interrupt enabled.         */
}

/**
 * @brief   SPC560B/Cxx clocks and PLL initialization.
 * @note    All the involved constants come from the file @p board.h and
 *          @p hal_lld.h
 * @note    This function must be invoked only after the system reset.
 *
 * @special
 */
void spc_clock_init(void) {

  /* Waiting for IRC stabilization before attempting anything else.*/
  while (!ME.GS.B.S_FIRC)
    ;

#if !SPC5_NO_INIT

#if SPC5_DISABLE_WATCHDOG
  /* SWT disabled.*/
  SWT.SR.R = 0xC520;
  SWT.SR.R = 0xD928;
  SWT.CR.R = 0xFF00000A;
#endif

  /* SSCM initialization. Setting up the most restrictive handling of
     invalid accesses to peripherals.*/
  SSCM.ERROR.R = 3;                             /* PAE and RAE bits.        */

  /* RGM errors clearing.*/
  RGM.FES.R         = 0xFFFF;
  RGM.DES.R         = 0xFFFF;

  /* Oscillators dividers setup.*/
  CGM.FIRC_CTL.B.RCDIV   = SPC5_IRCDIV_VALUE - 1;
  CGM.FXOSC_CTL.B.OSCDIV = SPC5_XOSCDIV_VALUE - 1;

  /* The system must be in DRUN mode on entry, if this is not the case then
     it is considered a serious anomaly.*/
  if (ME.GS.B.S_CURRENTMODE != SPC5_RUNMODE_DRUN) {
    SPC5_CLOCK_FAILURE_HOOK();
  }

#if defined(SPC5_OSC_BYPASS)
  /* If the board is equipped with an oscillator instead of a xtal then the
     bypass must be activated.*/
  CGM.OSC_CTL.B.OSCBYP = TRUE;
#endif /* SPC5_OSC_BYPASS */

  /* Setting the various dividers and source selectors.*/
  CGM.SC_DC[0].R    = SPC5_CGM_SC_DC0;
  CGM.SC_DC[1].R    = SPC5_CGM_SC_DC1;
  CGM.SC_DC[2].R    = SPC5_CGM_SC_DC2;

  /* Initialization of the FMPLLs settings.*/
  CGM.FMPLL_CR.R = SPC5_FMPLL0_ODF |
                   ((SPC5_FMPLL0_IDF_VALUE - 1) << 26) |
                   (SPC5_FMPLL0_NDIV_VALUE << 16);
  CGM.FMPLL_MR.R = 0;                           /* TODO: Add a setting.     */

  /* Run modes initialization.*/
  ME.IS.R           = 8;                        /* Resetting I_ICONF status.*/
  ME.MER.R          = SPC5_ME_ME_BITS;          /* Enabled run modes.       */
  ME.TEST.R         = SPC5_ME_TEST_MC_BITS;     /* TEST run mode.           */
  ME.SAFE.R         = SPC5_ME_SAFE_MC_BITS;     /* SAFE run mode.           */
  ME.DRUN.R         = SPC5_ME_DRUN_MC_BITS;     /* DRUN run mode.           */
  ME.RUN[0].R       = SPC5_ME_RUN0_MC_BITS;     /* RUN0 run mode.           */
  ME.RUN[1].R       = SPC5_ME_RUN1_MC_BITS;     /* RUN1 run mode.           */
  ME.RUN[2].R       = SPC5_ME_RUN2_MC_BITS;     /* RUN2 run mode.           */
  ME.RUN[3].R       = SPC5_ME_RUN3_MC_BITS;     /* RUN0 run mode.           */
  ME.HALT0.R        = SPC5_ME_HALT0_MC_BITS;    /* HALT0 run mode.          */
  ME.STOP0.R        = SPC5_ME_STOP0_MC_BITS;    /* STOP0 run mode.          */
  ME.STANDBY0.R     = SPC5_ME_STANDBY0_MC_BITS; /* STANDBY0 run mode.       */
  if (ME.IS.B.I_CONF) {
    /* Configuration rejected.*/
    SPC5_CLOCK_FAILURE_HOOK();
  }

  /* Peripherals run and low power modes initialization.*/
  ME.RUNPC[0].R     = SPC5_ME_RUN_PC0_BITS;
  ME.RUNPC[1].R     = SPC5_ME_RUN_PC1_BITS;
  ME.RUNPC[2].R     = SPC5_ME_RUN_PC2_BITS;
  ME.RUNPC[3].R     = SPC5_ME_RUN_PC3_BITS;
  ME.RUNPC[4].R     = SPC5_ME_RUN_PC4_BITS;
  ME.RUNPC[5].R     = SPC5_ME_RUN_PC5_BITS;
  ME.RUNPC[6].R     = SPC5_ME_RUN_PC6_BITS;
  ME.RUNPC[7].R     = SPC5_ME_RUN_PC7_BITS;
  ME.LPPC[0].R      = SPC5_ME_LP_PC0_BITS;
  ME.LPPC[1].R      = SPC5_ME_LP_PC1_BITS;
  ME.LPPC[2].R      = SPC5_ME_LP_PC2_BITS;
  ME.LPPC[3].R      = SPC5_ME_LP_PC3_BITS;
  ME.LPPC[4].R      = SPC5_ME_LP_PC4_BITS;
  ME.LPPC[5].R      = SPC5_ME_LP_PC5_BITS;
  ME.LPPC[6].R      = SPC5_ME_LP_PC6_BITS;
  ME.LPPC[7].R      = SPC5_ME_LP_PC7_BITS;

  /* CFLASH settings calculated for a maximum clock of 64MHz.*/
  CFLASH.PFCR0.B.BK0_APC  = 2;
  CFLASH.PFCR0.B.BK0_RWSC = 2;
  CFLASH.PFCR1.B.BK1_APC  = 2;
  CFLASH.PFCR1.B.BK1_RWSC = 2;

  /* Switches again to DRUN mode (current mode) in order to update the
     settings.*/
  if (halSPCSetRunMode(SPC5_RUNMODE_DRUN) == CH_FAILED) {
    SPC5_CLOCK_FAILURE_HOOK();
  }
#endif /* !SPC5_NO_INIT */
}

/**
 * @brief   Switches the system to the specified run mode.
 *
 * @param[in] mode      one of the possible run modes
 *
 * @return              The operation status.
 * @retval CH_SUCCESS   if the switch operation has been completed.
 * @retval CH_FAILED    if the switch operation failed.
 */
bool_t halSPCSetRunMode(spc5_runmode_t mode) {

  /* Clearing status register bits I_IMODE(4) and I_IMTC(1).*/
  ME.IS.R = 5;

  /* Starts a transition process.*/
  ME.MCTL.R = SPC5_ME_MCTL_MODE(mode) | SPC5_ME_MCTL_KEY;
  ME.MCTL.R = SPC5_ME_MCTL_MODE(mode) | SPC5_ME_MCTL_KEY_INV;

  /* Waits for the mode switch or an error condition.*/
  while (TRUE) {
    uint32_t r = ME.IS.R;
    if (r & 1)
      return CH_SUCCESS;
    if (r & 4)
      return CH_FAILED;
  }
}

/**
 * @brief   Changes the clock mode of a peripheral.
 *
 * @param[in] n         index of the @p PCTL register
 * @param[in] pctl      new value for the @p PCTL register
 *
 * @notapi
 */
void halSPCSetPeripheralClockMode(uint32_t n, uint32_t pctl) {
  uint32_t mode;

  ME.PCTL[n].R = pctl;
  mode = ME.MCTL.B.TARGET_MODE;
  ME.MCTL.R = SPC5_ME_MCTL_MODE(mode) | SPC5_ME_MCTL_KEY;
  ME.MCTL.R = SPC5_ME_MCTL_MODE(mode) | SPC5_ME_MCTL_KEY_INV;
}

#if !SPC5_NO_INIT || defined(__DOXYGEN__)
/**
 * @brief   Returns the system clock under the current run mode.
 *
 * @return              The system clock in Hertz.
 */
uint32_t halSPCGetSystemClock(void) {
  uint32_t sysclk;

  sysclk = ME.GS.B.S_SYSCLK;
  switch (sysclk) {
  case SPC5_ME_GS_SYSCLK_IRC:
    return SPC5_IRC_CLK;
  case SPC5_ME_GS_SYSCLK_DIVIRC:
    return SPC5_IRC_CLK / SPC5_IRCDIV_VALUE;
  case SPC5_ME_GS_SYSCLK_XOSC:
    return SPC5_XOSC_CLK / SPC5_XOSCDIV_VALUE;
  case SPC5_ME_GS_SYSCLK_DIVXOSC:
    return SPC5_XOSC_CLK;
  case SPC5_ME_GS_SYSCLK_FMPLL0:
    return SPC5_FMPLL0_CLK;
  default:
    return 0;
  }
}
#endif /* !SPC5_NO_INIT */

/** @} */