tinySA/os/hal/platforms/STM32/i2c_lld.c

/*
    ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
                 2011 Giovanni Di Sirio.

    This file is part of ChibiOS/RT.

    ChibiOS/RT is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 3 of the License, or
    (at your option) any later version.

    ChibiOS/RT is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program.  If not, see <http://www.gnu.org/licenses/>.
*/

/**
 * @file STM32/i2c_lld.c
 * @brief STM32 I2C subsystem low level driver source. Slave mode not implemented.
 * @addtogroup I2C
 * @{
 */

#include "ch.h"
#include "hal.h"
#include "i2c_lld.h"

#if HAL_USE_I2C || defined(__DOXYGEN__)

/*===========================================================================*/
/* Datasheet notes.                                                          */
/*===========================================================================*/
/**
 * From RM0008.pdf
 *
 * Note:
 * When the STOP, START or PEC bit is set, the software must NOT perform
 * any write access to I2C_CR1 before this bit is cleared by hardware.
 * Otherwise there is a  risk of setting a second STOP, START or PEC request.
 */

/*===========================================================================*/
/* Driver local definitions.                                                 */
/*===========================================================================*/
#define I2C1_RX_DMA_CHANNEL                                                 \
  STM32_DMA_GETCHANNEL(STM32_I2C_I2C1_RX_DMA_STREAM,                        \
                       STM32_I2C1_RX_DMA_CHN)

#define I2C1_TX_DMA_CHANNEL                                                 \
  STM32_DMA_GETCHANNEL(STM32_I2C_I2C1_TX_DMA_STREAM,                        \
                       STM32_I2C1_TX_DMA_CHN)

#define I2C2_RX_DMA_CHANNEL                                                 \
  STM32_DMA_GETCHANNEL(STM32_I2C_I2C2_RX_DMA_STREAM,                        \
                       STM32_I2C2_RX_DMA_CHN)

#define I2C2_TX_DMA_CHANNEL                                                 \
  STM32_DMA_GETCHANNEL(STM32_I2C_I2C2_TX_DMA_STREAM,                        \
                       STM32_I2C2_TX_DMA_CHN)

/*===========================================================================*/
/* Driver constants.                                                         */
/*===========================================================================*/

/*===========================================================================*/
/* Driver exported variables.                                                */
/*===========================================================================*/

/** @brief I2C1 driver identifier.*/
#if STM32_I2C_USE_I2C1 || defined(__DOXYGEN__)
I2CDriver I2CD1;
#endif

/** @brief I2C2 driver identifier.*/
#if STM32_I2C_USE_I2C2 || defined(__DOXYGEN__)
I2CDriver I2CD2;
#endif

/*===========================================================================*/
/* Driver local variables.                                                   */
/*===========================================================================*/

/* Debugging variables */
#if CH_DBG_ENABLE_ASSERTS
static volatile uint16_t dbgSR1 = 0;
static volatile uint16_t dbgSR2 = 0;
static volatile uint16_t dbgCR1 = 0;
static volatile uint16_t dbgCR2 = 0;
#endif /* CH_DBG_ENABLE_ASSERTS */

/* defines for convenience purpose */
#define txBuffp (i2cp->txbuff_p)
#define rxBuffp (i2cp->rxbuff_p)

/*===========================================================================*/
/* Driver local functions.                                                   */
/*===========================================================================*/




#if CH_DBG_ENABLE_ASSERTS
void _i2c_unhandled_case(I2CDriver *i2cp){
  dbgCR1 = i2cp->id_i2c->CR1;
  dbgCR2 = i2cp->id_i2c->CR2;
  chDbgAssert((dbgSR1 + dbgSR2) == 0,
        "i2c_serve_event_interrupt(), #1",
        "unhandled case");
}
#else
#define _i2c_unhandled_case(i2cp)
#endif /* CH_DBG_ENABLE_ASSERTS */




/**
 * @brief   Return the last event value from I2C status registers.
 * @note    Internal use only.
 *
 * @param[in] i2cp      pointer to the @p I2CDriver object
 *
 * @notapi
 */
static uint32_t i2c_get_event(I2CDriver *i2cp){
  uint16_t regSR1 = i2cp->id_i2c->SR1;
  uint16_t regSR2 = i2cp->id_i2c->SR2;
  #if CH_DBG_ENABLE_ASSERTS
    dbgSR1 = regSR1;
    dbgSR2 = regSR2;
  #endif /* CH_DBG_ENABLE_ASSERTS */

  return (I2C_EV_MASK & (regSR1 | (regSR2 << 16)));
}





static void i2c_serve_event_interrupt(I2CDriver *i2cp) {
  I2C_TypeDef *dp = i2cp->id_i2c;

  switch(i2c_get_event(i2cp)){
  case I2C_EV5_MASTER_MODE_SELECT:
    i2cp->flags &= ~I2C_FLG_HEADER_SENT;
    dp->DR = i2cp->slave_addr1;
    break;

  case I2C_EV6_MASTER_REC_MODE_SELECTED:
    /* begin receiving via DMA */
    i2cp->id_i2c->CR2 &= ~I2C_CR2_ITBUFEN; /* switch off interrupt because we use DMA*/
    break;



  default:
    break;
  }
}





static void i2c_serve_error_interrupt(I2CDriver *i2cp) {
  i2cflags_t flags;
  I2C_TypeDef *reg;

  reg = i2cp->id_i2c;
  flags = I2CD_NO_ERROR;

  if(reg->SR1 & I2C_SR1_BERR) {                /* Bus error */
    reg->SR1 &= ~I2C_SR1_BERR;
    flags |= I2CD_BUS_ERROR;
  }
  if(reg->SR1 & I2C_SR1_ARLO) {                /* Arbitration lost */
    reg->SR1 &= ~I2C_SR1_ARLO;
    flags |= I2CD_ARBITRATION_LOST;
  }
  if(reg->SR1 & I2C_SR1_AF) {                  /* Acknowledge fail */
    reg->SR1 &= ~I2C_SR1_AF;
    reg->CR1 |= I2C_CR1_STOP;                  /* setting stop bit */
    while(i2cp->id_i2c->CR1 & I2C_CR1_STOP)
      ;
    flags |= I2CD_ACK_FAILURE;
  }
  if(reg->SR1 & I2C_SR1_OVR) {                 /* Overrun */
    reg->SR1 &= ~I2C_SR1_OVR;
    flags |= I2CD_OVERRUN;
  }
  if(reg->SR1 & I2C_SR1_PECERR) {              /* PEC error */
    reg->SR1 &= ~I2C_SR1_PECERR;
    flags |= I2CD_PEC_ERROR;
  }
  if(reg->SR1 & I2C_SR1_TIMEOUT) {             /* SMBus Timeout */
    reg->SR1 &= ~I2C_SR1_TIMEOUT;
    flags |= I2CD_TIMEOUT;
  }
  if(reg->SR1 & I2C_SR1_SMBALERT) {            /* SMBus alert */
    reg->SR1 &= ~I2C_SR1_SMBALERT;
    flags |= I2CD_SMB_ALERT;
  }

  if(flags != I2CD_NO_ERROR) {                /* send communication end signal */
    chSysLockFromIsr();
    i2cAddFlagsI(i2cp, flags);
    chSysUnlockFromIsr();
  #if I2C_SUPPORTS_CALLBACKS
    _i2c_isr_err_code(i2cp, i2cp->id_slave_config);
  #endif /* I2C_SUPPORTS_CALLBACKS */
  }
}






static void i2c_lld_serve_rx_end_irq(I2CDriver *i2cp, uint32_t flags){
  (void)flags;

  dmaStreamDisable(i2cp->dmarx);
  i2cp->id_i2c->CR1 |= I2C_CR1_STOP;
  while(i2cp->id_i2c->CR1 & I2C_CR1_STOP)
    ;
  _i2c_isr_code(i2cp, i2cp->id_slave_config);
}



static void i2c_lld_serve_tx_end_irq(I2CDriver *i2cp, uint32_t flags) {
  (void)i2cp;
  (void)flags;
}






#if STM32_I2C_USE_I2C1 || defined(__DOXYGEN__)
#error "Unrealized yet"
#endif /* STM32_I2C_USE_I2C1 */

#if STM32_I2C_USE_I2C2 || defined(__DOXYGEN__)
/**
 * @brief I2C2 event interrupt handler.
 */
CH_IRQ_HANDLER(I2C2_EV_IRQHandler) {
  CH_IRQ_PROLOGUE();
  i2c_serve_event_interrupt(&I2CD2);
  CH_IRQ_EPILOGUE();
}
/**
 * @brief I2C2 error interrupt handler.
 */
CH_IRQ_HANDLER(I2C2_ER_IRQHandler) {
  CH_IRQ_PROLOGUE();
  i2c_serve_error_interrupt(&I2CD2);
  CH_IRQ_EPILOGUE();
}
#endif /* STM32_I2C_USE_I2C2 */





/**
 * @brief Low level I2C driver initialization.
 */
void i2c_lld_init(void) {

#if STM32_I2C_USE_I2C1
#error "Unrealized yet"
#endif /* STM32_I2C_USE_I2C */

#if STM32_I2C_USE_I2C2
  i2cObjectInit(&I2CD2);
  I2CD2.id_i2c = I2C2;
  I2CD2.dmarx  = STM32_DMA_STREAM(STM32_I2C_I2C2_RX_DMA_STREAM);
  I2CD2.dmatx  = STM32_DMA_STREAM(STM32_I2C_I2C2_TX_DMA_STREAM);
#endif /* STM32_I2C_USE_I2C2 */
}






/**
 * @brief Configures and activates the I2C peripheral.
 *
 * @param[in] i2cp      pointer to the @p I2CDriver object
 */
void i2c_lld_start(I2CDriver *i2cp) {
  i2cp->dmamode = STM32_DMA_CR_DMEIE | STM32_DMA_CR_TEIE;

  if (i2cp->id_state == I2C_STOP) {         /* If in stopped state then enables the I2C clock.*/
#if STM32_I2C_USE_I2C1
//    if (&I2CD1 == i2cp) {
//      NVICEnableVector(I2C1_EV_IRQn,
//          CORTEX_PRIORITY_MASK(STM32_I2C_I2C1_IRQ_PRIORITY));
//      NVICEnableVector(I2C1_ER_IRQn,
//          CORTEX_PRIORITY_MASK(STM32_I2C_I2C1_IRQ_PRIORITY));
//      rccEnableI2C1(FALSE);
//    }
#error "Unrealized yet"
#endif

#if STM32_I2C_USE_I2C2
    if (&I2CD2 == i2cp) {

      bool_t b;
      b = dmaStreamAllocate(i2cp->dmarx,
                            STM32_I2C_I2C2_IRQ_PRIORITY,
                            (stm32_dmaisr_t)i2c_lld_serve_rx_end_irq,
                            (void *)i2cp);
      chDbgAssert(!b, "uart_lld_start(), #3", "stream already allocated");
      b = dmaStreamAllocate(i2cp->dmatx,
                            STM32_I2C_I2C2_IRQ_PRIORITY,
                            (stm32_dmaisr_t)i2c_lld_serve_tx_end_irq,
                            (void *)i2cp);
      chDbgAssert(!b, "uart_lld_start(), #4", "stream already allocated");
      rccEnableI2C2(FALSE);
      NVICEnableVector(I2C2_EV_IRQn,
          CORTEX_PRIORITY_MASK(STM32_I2C_I2C2_IRQ_PRIORITY));
      NVICEnableVector(I2C2_ER_IRQn,
          CORTEX_PRIORITY_MASK(STM32_I2C_I2C2_IRQ_PRIORITY));

      i2cp->dmamode |= STM32_DMA_CR_CHSEL(I2C2_RX_DMA_CHANNEL) |
                            STM32_DMA_CR_PL(STM32_I2C_I2C2_DMA_PRIORITY);
    }
#endif /* STM32_I2C_USE_I2C2 */
  }
  i2cp->dmamode |= STM32_DMA_CR_PSIZE_BYTE | STM32_DMA_CR_MSIZE_BYTE;
  dmaStreamSetPeripheral(i2cp->dmarx, &i2cp->id_i2c->DR);
  dmaStreamSetPeripheral(i2cp->dmatx, &i2cp->id_i2c->DR);

  i2cp->id_i2c->CR1 = I2C_CR1_SWRST;        /* reset i2c peripherial */
  i2cp->id_i2c->CR1 = 0;
  i2c_lld_set_clock(i2cp);
  i2c_lld_set_opmode(i2cp);

  i2cp->id_i2c->CR1 |= 1;                   /* enable interface */
}






void i2c_lld_reset(I2CDriver *i2cp){
  chDbgCheck((i2cp->id_state == I2C_STOP)||(i2cp->id_state == I2C_READY),
             "i2c_lld_reset: invalid state");

  /*TODO: Check what interface we must reset */
  rccResetI2C1();
  rccResetI2C2();
}







/**
 * @brief Set clock speed.
 *
 * @param[in] i2cp      pointer to the @p I2CDriver object
 */
void i2c_lld_set_clock(I2CDriver *i2cp) {
  volatile uint16_t regCCR, regCR2, freq, clock_div;
  volatile uint16_t pe_bit_saved;
  int32_t clock_speed = i2cp->id_config->clock_speed;
  i2cdutycycle_t duty = i2cp->id_config->duty_cycle;

  chDbgCheck((i2cp != NULL) && (clock_speed > 0) && (clock_speed <= 4000000),
             "i2c_lld_set_clock");

  /**************************************************************************
   * CR2 Configuration
   */
  regCR2 = i2cp->id_i2c->CR2;                   /* Get the I2Cx CR2 value */
  regCR2 &= (uint16_t)~I2C_CR2_FREQ;            /* Clear frequency FREQ[5:0] bits */
  freq = (uint16_t)(STM32_PCLK1 / 1000000);     /* Set frequency bits depending on pclk1 value */
#ifdef STM32F4XX
  chDbgCheck((freq >= 2) && (freq <= 42),
                "i2c_lld_set_clock() : Peripheral clock freq. out of range");
#else
  chDbgCheck((freq >= 2) && (freq <= 36),
              "i2c_lld_set_clock() : Peripheral clock freq. out of range");
#endif
  regCR2 |= freq;
  i2cp->id_i2c->CR2 = regCR2;

  /**************************************************************************
   * CCR Configuration
   */
  pe_bit_saved = (i2cp->id_i2c->CR1 & I2C_CR1_PE);
  i2cp->id_i2c->CR1 &= (uint16_t)~I2C_CR1_PE;                   /* Disable the selected I2C peripheral to configure TRISE */
  regCCR = 0;                                                   /* Clear F/S, DUTY and CCR[11:0] bits */
  clock_div = I2C_CCR_CCR;

  if (clock_speed <= 100000) {                                  /* Configure clock_div in standard mode */
    chDbgAssert(duty == STD_DUTY_CYCLE,
                "i2c_lld_set_clock(), #1",
                "Invalid standard mode duty cycle");
    clock_div = (uint16_t)(STM32_PCLK1 / (clock_speed * 2));    /* Standard mode clock_div calculate: Tlow/Thigh = 1/1 */
    if (clock_div < 0x04) clock_div = 0x04;                     /* Test if CCR value is under 0x4, and set the minimum allowed value */
    regCCR |= (clock_div & I2C_CCR_CCR);                        /* Set clock_div value for standard mode */
    i2cp->id_i2c->TRISE = freq + 1;                             /* Set Maximum Rise Time for standard mode */
  }
  else if(clock_speed <= 400000) {                              /* Configure clock_div in fast mode */
    chDbgAssert((duty == FAST_DUTY_CYCLE_2) ||
                (duty == FAST_DUTY_CYCLE_16_9),
                "i2c_lld_set_clock(), #2",
                "Invalid fast mode duty cycle");
    if(duty == FAST_DUTY_CYCLE_2) {
      clock_div = (uint16_t)(STM32_PCLK1 / (clock_speed * 3));  /* Fast mode clock_div calculate: Tlow/Thigh = 2/1 */
    }
    else if(duty == FAST_DUTY_CYCLE_16_9) {
      clock_div = (uint16_t)(STM32_PCLK1 / (clock_speed * 25)); /* Fast mode clock_div calculate: Tlow/Thigh = 16/9 */
      regCCR |= I2C_CCR_DUTY;                                   /* Set DUTY bit */
    }
    if(clock_div < 0x01) clock_div = 0x01;                      /* Test if CCR value is under 0x1, and set the minimum allowed value */
    regCCR |= (I2C_CCR_FS | (clock_div & I2C_CCR_CCR));         /* Set clock_div value and F/S bit for fast mode*/
    i2cp->id_i2c->TRISE = (freq * 300 / 1000) + 1;              /* Set Maximum Rise Time for fast mode */
  }
  chDbgAssert((clock_div <= I2C_CCR_CCR),
      "i2c_lld_set_clock(), #3", "Too low clock clock speed selected");

  i2cp->id_i2c->CCR = regCCR;                                   /* Write to I2Cx CCR */
  i2cp->id_i2c->CR1 |= pe_bit_saved;                            /* restore the I2C peripheral enabled state */
}







/**
 * @brief Set operation mode of I2C hardware.
 *
 * @param[in] i2cp      pointer to the @p I2CDriver object
 */
void i2c_lld_set_opmode(I2CDriver *i2cp) {
  i2copmode_t opmode = i2cp->id_config->op_mode;
  uint16_t regCR1;

  regCR1 = i2cp->id_i2c->CR1;             /* Get the I2Cx CR1 value */
  switch(opmode){
  case OPMODE_I2C:
    regCR1 &= (uint16_t)~(I2C_CR1_SMBUS|I2C_CR1_SMBTYPE);
    break;
  case OPMODE_SMBUS_DEVICE:
    regCR1 |= I2C_CR1_SMBUS;
    regCR1 &= (uint16_t)~(I2C_CR1_SMBTYPE);
    break;
  case OPMODE_SMBUS_HOST:
    regCR1 |= (I2C_CR1_SMBUS|I2C_CR1_SMBTYPE);
    break;
  }

  i2cp->id_i2c->CR1 = regCR1;             /* Write to I2Cx CR1 */
}









/**
 * @brief Set own address.
 *
 * @param[in] i2cp      pointer to the @p I2CDriver object
 */
void i2c_lld_set_own_address(I2CDriver *i2cp) {
  /* TODO: dual address mode */

  i2cp->id_i2c->OAR1 |= 1 << 14;

  if (&(i2cp->id_config->own_addr_10) == NULL){       /* only 7-bit address */
    i2cp->id_i2c->OAR1 &= (~I2C_OAR1_ADDMODE);
    i2cp->id_i2c->OAR1 |= i2cp->id_config->own_addr_7 << 1;
  }
  else {
    chDbgAssert((i2cp->id_config->own_addr_10 < 1024),
        "i2c_lld_set_own_address(), #1", "10-bit address longer then 10 bit")
    i2cp->id_i2c->OAR1 |= I2C_OAR1_ADDMODE;
    i2cp->id_i2c->OAR1 |= i2cp->id_config->own_addr_10;
  }
}







/**
 * @brief Deactivates the I2C peripheral.
 *
 * @param[in] i2cp      pointer to the @p I2CDriver object
 */
void i2c_lld_stop(I2CDriver *i2cp) {
  if (i2cp->id_state == I2C_READY) {  /* If in ready state then disables the I2C clock.*/
#if STM32_I2C_USE_I2C1
    if (&I2CD1 == i2cp) {
      NVICDisableVector(I2C1_EV_IRQn);
      NVICDisableVector(I2C1_ER_IRQn);
      rccDisableI2C1(FALSE);
    }
#endif
#if STM32_I2C_USE_I2C2
    if (&I2CD2 == i2cp) {
      NVICDisableVector(I2C2_EV_IRQn);
      NVICDisableVector(I2C2_ER_IRQn);
      rccDisableI2C2(FALSE);
    }
#endif
  }

  i2cp->id_state = I2C_STOP;
}






void i2c_lld_master_receive(I2CDriver *i2cp, uint16_t slave_addr, uint8_t *rxbuf, size_t rxbytes){
  (void)slave_addr;

  uint32_t mode = 0;

  /* init driver fields */
  i2cp->slave_addr = slave_addr;
  i2cp->rxbytes = rxbytes;
  i2cp->rxbuf = rxbuf;

  /* init address fields */
  if(slave_addr & 0x8000){                            /* 10-bit mode used */
    i2cp->slave_addr1 = ((slave_addr >>7) & 0x0006);  /* add the two msb of 10-bit address to the header */
    i2cp->slave_addr1 |= 0xF0;                        /* add the header bits (the LSB -> 1 will be add to second */
    i2cp->slave_addr2 = slave_addr & 0x00FF;          /* the remaining 8 bit of 10-bit address */
  }
  else{
    i2cp->slave_addr1 = ((slave_addr <<1) | 0x01);    /* LSB = 1 -> receive */
  }

  /* setting flags and register bits */
  i2cp->flags |= I2C_FLG_MASTER_RECEIVER;
  i2cp->errors = 0;

  mode = STM32_DMA_CR_DIR_P2M | STM32_DMA_CR_MINC | STM32_DMA_CR_TCIE;
  // TODO: DMA error handling
  dmaStreamSetMemory0(i2cp->dmarx, rxbuf);
  dmaStreamSetTransactionSize(i2cp->dmarx, rxbytes);
  dmaStreamSetMode(i2cp->dmarx, ((i2cp->dmamode) | mode));
  dmaStreamEnable(i2cp->dmarx);

  i2cp->id_i2c->CR2 |= I2C_CR2_DMAEN | I2C_CR2_LAST;

  i2cp->id_i2c->CR2 |= I2C_CR2_ITERREN | I2C_CR2_ITEVTEN;
  i2cp->id_i2c->CR1 |= I2C_CR1_START | I2C_CR1_ACK;
}






/**
 * @brief Transmits data via the I2C bus as master.
 *
 * @param[in] i2cp        pointer to the @p I2CDriver object
 * @param[in] slave_addr  Slave device address. Bits 0-9 contain slave
 *                        device address. Bit 15 must be set to 1 if 10-bit
 *                        addressing modes used. Otherwise  keep it cleared.
 *                        Bits 10-14 unused.
 * @param[in] txbuf       pointer to the transmit buffer
 * @param[in] txbytes     number of bytes to be transmitted
 * @param[in] rxbuf       pointer to the receive buffer
 * @param[in] rxbytes     number of bytes to be received
 */
void i2c_lld_master_transmit(I2CDriver *i2cp, uint16_t slave_addr,
    uint8_t *txbuf, size_t txbytes, uint8_t *rxbuf, size_t rxbytes) {
  (void)i2cp;
  (void)slave_addr;
  (void)txbuf;
  (void)txbytes;
  (void)rxbuf;
  (void)rxbytes;
}






void i2c_lld_master_transceive(I2CDriver *i2cp){
  (void)i2cp;
}

#undef rxBuffp
#undef txBuffp

#endif /* HAL_USE_I2C */