tinySA/os/hal/platforms/STM32F0xx/platform.dox

/*
    ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at

        http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.
*/

/**
 * @defgroup STM32F0xx_DRIVERS STM32F0xx Drivers
 * @details This section describes all the supported drivers on the STM32F0xx
 *          platform and the implementation details of the single drivers.
 *
 * @ingroup platforms
 */

/**
 * @defgroup STM32F0xx_HAL STM32F0xx Initialization Support
 * @details The STM32F0xx HAL support is responsible for system initialization.
 *
 * @section stm32f0xx_hal_1 Supported HW resources
 * - PLL1.
 * - RCC.
 * - Flash.
 * .
 * @section stm32f0xx_hal_2 STM32F0xx HAL driver implementation features
 * - PLL startup and stabilization.
 * - Clock tree initialization.
 * - Clock source selection.
 * - Flash wait states initialization based on the selected clock options.
 * - SYSTICK initialization based on current clock and kernel required rate.
 * - DMA support initialization.
 * .
 * @ingroup STM32F0xx_DRIVERS
 */

/**
 * @defgroup STM32F0xx_ADC STM32F0xx ADC Support
 * @details The STM32F0xx ADC driver supports the ADC peripherals using DMA
 *          channels for maximum performance.
 *
 * @section stm32f0xx_adc_1 Supported HW resources
 * - ADC1.
 * - DMA1.
 * .
 * @section stm32f0xx_adc_2 STM32F0xx ADC driver implementation features
 * - Clock stop for reduced power usage when the driver is in stop state.
 * - Streaming conversion using DMA for maximum performance.
 * - Programmable ADC interrupt priority level.
 * - Programmable DMA bus priority for each DMA channel.
 * - Programmable DMA interrupt priority for each DMA channel.
 * - DMA errors detection.
 * .
 * @ingroup STM32F0xx_DRIVERS
 */

/**
 * @defgroup STM32F0xx_EXT STM32F0xx EXT Support
 * @details The STM32F0xx EXT driver uses the EXTI peripheral.
 *
 * @section stm32f0xx_ext_1 Supported HW resources
 * - EXTI.
 * .
 * @section stm32f0xx_ext_2 STM32F0xx EXT driver implementation features
 * - Each EXTI channel can be independently enabled and programmed.
 * - Programmable EXTI interrupts priority level.
 * - Capability to work as event sources (WFE) rather than interrupt sources.
 * .
 * @ingroup STM32F0xx_DRIVERS
 */

/**
 * @defgroup STM32F0xx_GPT STM32F0xx GPT Support
 * @details The STM32F0xx GPT driver uses the TIMx peripherals.
 *
 * @section stm32f0xx_gpt_1 Supported HW resources
 * - TIM1.
 * - TIM2.
 * - TIM3.
 * .
 * @section stm32f0xx_gpt_2 STM32F0xx GPT driver implementation features
 * - Each timer can be independently enabled and programmed. Unused
 *   peripherals are left in low power mode.
 * - Programmable TIMx interrupts priority level.
 * .
 * @ingroup STM32F0xx_DRIVERS
 */

/**
 * @defgroup STM32F0xx_ICU STM32F0xx ICU Support
 * @details The STM32F0xx ICU driver uses the TIMx peripherals.
 *
 * @section stm32f0xx_icu_1 Supported HW resources
 * - TIM1.
 * - TIM2.
 * - TIM3.
 * .
 * @section stm32f0xx_icu_2 STM32F0xx ICU driver implementation features
 * - Each timer can be independently enabled and programmed. Unused
 *   peripherals are left in low power mode.
 * - Programmable TIMx interrupts priority level.
 * .
 * @ingroup STM32F0xx_DRIVERS
 */

/**
 * @defgroup STM32F0xx_PAL STM32F0xx PAL Support
 * @details The STM32F0xx PAL driver uses the GPIO peripherals.
 *
 * @section stm32f0xx_pal_1 Supported HW resources
 * - GPIOA.
 * - GPIOB.
 * - GPIOC.
 * - GPIOD.
 * - GPIOF.
 * .
 * @section stm32f0xx_pal_2 STM32F0xx PAL driver implementation features
 * The PAL driver implementation fully supports the following hardware
 * capabilities:
 * - 16 bits wide ports.
 * - Atomic set/reset functions.
 * - Atomic set+reset function (atomic bus operations).
 * - Output latched regardless of the pad setting.
 * - Direct read of input pads regardless of the pad setting.
 * .
 * @section stm32f0xx_pal_3 Supported PAL setup modes
 * The STM32F0xx PAL driver supports the following I/O modes:
 * - @p PAL_MODE_RESET.
 * - @p PAL_MODE_UNCONNECTED.
 * - @p PAL_MODE_INPUT.
 * - @p PAL_MODE_INPUT_PULLUP.
 * - @p PAL_MODE_INPUT_PULLDOWN.
 * - @p PAL_MODE_INPUT_ANALOG.
 * - @p PAL_MODE_OUTPUT_PUSHPULL.
 * - @p PAL_MODE_OUTPUT_OPENDRAIN.
 * - @p PAL_MODE_ALTERNATE (non standard).
 * .
 * Any attempt to setup an invalid mode is ignored.
 *
 * @section stm32f0xx_pal_4 Suboptimal behavior
 * The STM32F0xx GPIO is less than optimal in several areas, the limitations
 * should be taken in account while using the PAL driver:
 * - Pad/port toggling operations are not atomic.
 * - Pad/group mode setup is not atomic.
 * .
 * @ingroup STM32F0xx_DRIVERS
 */

/**
 * @defgroup STM32F0xx_PWM STM32F0xx PWM Support
 * @details The STM32F0xx PWM driver uses the TIMx peripherals.
 *
 * @section stm32f0xx_pwm_1 Supported HW resources
 * - TIM1.
 * - TIM2.
 * - TIM3.
 * .
 * @section stm32f0xx_pwm_2 STM32F0xx PWM driver implementation features
 * - Each timer can be independently enabled and programmed. Unused
 *   peripherals are left in low power mode.
 * - Four independent PWM channels per timer.
 * - Programmable TIMx interrupts priority level.
 * .
 * @ingroup STM32F0xx_DRIVERS
 */

/**
 * @defgroup STM32F0xx_SERIAL STM32F0xx Serial Support
 * @details The STM32F0xx Serial driver uses the USART/UART peripherals in a
 *          buffered, interrupt driven, implementation.
 *
 * @section stm32f0xx_serial_1 Supported HW resources
 * The serial driver can support any of the following hardware resources:
 * - USART1.
 * - USART2.
 * .
 * @section stm32f0xx_serial_2 STM32F0xx Serial driver implementation features
 * - Clock stop for reduced power usage when the driver is in stop state.
 * - Each UART/USART can be independently enabled and programmed. Unused
 *   peripherals are left in low power mode.
 * - Fully interrupt driven.
 * - Programmable priority levels for each UART/USART.
 * .
 * @ingroup STM32F0xx_DRIVERS
 */

/**
 * @defgroup STM32F0xx_SPI STM32F0xx SPI Support
 * @details The SPI driver supports the STM32F0xx SPI peripherals using DMA
 *          channels for maximum performance.
 *
 * @section stm32f0xx_spi_1 Supported HW resources
 * - SPI1.
 * - SPI2.
 * - DMA1.
 * .
 * @section stm32f0xx_spi_2 STM32F0xx SPI driver implementation features
 * - Clock stop for reduced power usage when the driver is in stop state.
 * - Each SPI can be independently enabled and programmed. Unused
 *   peripherals are left in low power mode.
 * - Programmable interrupt priority levels for each SPI.
 * - DMA is used for receiving and transmitting.
 * - Programmable DMA bus priority for each DMA channel.
 * - Programmable DMA interrupt priority for each DMA channel.
 * - Programmable DMA error hook.
 * .
 * @ingroup STM32F0xx_DRIVERS
 */

/**
 * @defgroup STM32F0xx_UART STM32F0xx UART Support
 * @details The UART driver supports the STM32F0xx USART peripherals using DMA
 *          channels for maximum performance.
 *
 * @section stm32f0xx_uart_1 Supported HW resources
 * The UART driver can support any of the following hardware resources:
 * - USART1.
 * - USART2.
 * - DMA1.
 * .
 * @section stm32f0xx_uart_2 STM32F0xx UART driver implementation features
 * - Clock stop for reduced power usage when the driver is in stop state.
 * - Each UART/USART can be independently enabled and programmed. Unused
 *   peripherals are left in low power mode.
 * - Programmable interrupt priority levels for each UART/USART.
 * - DMA is used for receiving and transmitting.
 * - Programmable DMA bus priority for each DMA channel.
 * - Programmable DMA interrupt priority for each DMA channel.
 * - Programmable DMA error hook.
 * .
 * @ingroup STM32F0xx_DRIVERS
 */

/**
 * @defgroup STM32F0xx_PLATFORM_DRIVERS STM32F0xx Platform Drivers
 * @details Platform support drivers. Platform drivers do not implement HAL
 *          standard driver templates, their role is to support platform
 *          specific functionalities.
 *
 * @ingroup STM32F0xx_DRIVERS
 */

/**
 * @defgroup STM32F0xx_DMA STM32F0xx DMA Support
 * @details This DMA helper driver is used by the other drivers in order to
 *          access the shared DMA resources in a consistent way.
 *
 * @section stm32f0xx_dma_1 Supported HW resources
 * The DMA driver can support any of the following hardware resources:
 * - DMA1.
 * - DMA2 (where present).
 * .
 * @section stm32f0xx_dma_2 STM32F0xx DMA driver implementation features
 * - Exports helper functions/macros to the other drivers that share the
 *   DMA resource.
 * - Automatic DMA clock stop when not in use by any driver.
 * - DMA streams and interrupt vectors sharing among multiple drivers.
 * .
 * @ingroup STM32F0xx_PLATFORM_DRIVERS
 */

/**
 * @defgroup STM32F0xx_ISR STM32F0xx ISR Support
 * @details This ISR helper driver is used by the other drivers in order to
 *          map ISR names to physical vector names.
 *
 * @ingroup STM32F0xx_PLATFORM_DRIVERS
 */

/**
 * @defgroup STM32F0xx_RCC STM32F0xx RCC Support
 * @details This RCC helper driver is used by the other drivers in order to
 *          access the shared RCC resources in a consistent way.
 *
 * @section stm32f0xx_rcc_1 Supported HW resources
 * - RCC.
 * .
 * @section stm32f0xx_rcc_2 STM32F0xx RCC driver implementation features
 * - Peripherals reset.
 * - Peripherals clock enable.
 * - Peripherals clock disable.
 * .
 * @ingroup STM32F0xx_PLATFORM_DRIVERS
 */