tinySA/os/hal/ports/STM32/LLD/SPIv1/i2s_lld.h

352 lines
11 KiB
C
Raw Normal View History

/*
ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/**
* @file i2s_lld.h
* @brief STM32 I2S subsystem low level driver header.
*
* @addtogroup I2S
* @{
*/
#ifndef _I2S_LLD_H_
#define _I2S_LLD_H_
#if HAL_USE_I2S || defined(__DOXYGEN__)
/*===========================================================================*/
/* Driver constants. */
/*===========================================================================*/
/**
* @name Static I2S modes
* @{
*/
#define STM32_I2S_MODE_SLAVE 0
#define STM32_I2S_MODE_MASTER 1
#define STM32_I2S_MODE_RX 2
#define STM32_I2S_MODE_TX 4
#define STM32_I2S_MODE_RXTX (STM32_I2S_MODE_RX | \
STM32_I2S_MODE_TX)
/** @} */
/**
* @name Mode checks
* @{
*/
#define STM32_I2S_IS_MASTER(mode) ((mode) & STM32_I2S_MODE_MASTER)
#define STM32_I2S_RX_ENABLED(mode) ((mode) & STM32_I2S_MODE_RX)
#define STM32_I2S_TX_ENABLED(mode) ((mode) & STM32_I2S_MODE_TX)
/** @} */
/*===========================================================================*/
/* Driver pre-compile time settings. */
/*===========================================================================*/
/**
* @name Configuration options
* @{
*/
/**
* @brief I2S2 driver enable switch.
* @details If set to @p TRUE the support for I2S2 is included.
* @note The default is @p TRUE.
*/
#if !defined(STM32_I2S_USE_SPI2) || defined(__DOXYGEN__)
#define STM32_I2S_USE_SPI2 FALSE
#endif
/**
* @brief I2S3 driver enable switch.
* @details If set to @p TRUE the support for I2S3 is included.
* @note The default is @p TRUE.
*/
#if !defined(STM32_I2S_USE_SPI3) || defined(__DOXYGEN__)
#define STM32_I2S_USE_SPI3 FALSE
#endif
/**
* @brief I2S2 mode.
*/
#if !defined(STM32_I2S_SPI2_MODE) || defined(__DOXYGEN__)
#define STM32_I2S_SPI2_MODE (STM32_I2S_MODE_MASTER | \
STM32_I2S_MODE_RX)
#endif
/**
* @brief I2S3 mode.
*/
#if !defined(STM32_I2S_SPI3_MODE) || defined(__DOXYGEN__)
#define STM32_I2S_SPI3_MODE (STM32_I2S_MODE_MASTER | \
STM32_I2S_MODE_RX)
#endif
/**
* @brief I2S2 interrupt priority level setting.
*/
#if !defined(STM32_I2S_SPI2_IRQ_PRIORITY) || defined(__DOXYGEN__)
#define STM32_I2S_SPI2_IRQ_PRIORITY 10
#endif
/**
* @brief I2S3 interrupt priority level setting.
*/
#if !defined(STM32_I2S_SPI3_IRQ_PRIORITY) || defined(__DOXYGEN__)
#define STM32_I2S_SPI3_IRQ_PRIORITY 10
#endif
/**
* @brief I2S2 DMA priority (0..3|lowest..highest).
*/
#if !defined(STM32_I2S_SPI2_DMA_PRIORITY) || defined(__DOXYGEN__)
#define STM32_I2S_SPI2_DMA_PRIORITY 1
#endif
/**
* @brief I2S3 DMA priority (0..3|lowest..highest).
*/
#if !defined(STM32_I2S_SPI3_DMA_PRIORITY) || defined(__DOXYGEN__)
#define STM32_I2S_SPI3_DMA_PRIORITY 1
#endif
/**
* @brief I2S DMA error hook.
*/
#if !defined(STM32_I2S_DMA_ERROR_HOOK) || defined(__DOXYGEN__)
#define STM32_I2S_DMA_ERROR_HOOK(i2sp) osalSysHalt("DMA failure")
#endif
/** @} */
/*===========================================================================*/
/* Derived constants and error checks. */
/*===========================================================================*/
#if STM32_I2S_RX_ENABLED(STM32_I2S_SPI2_MODE) && \
STM32_I2S_TX_ENABLED(STM32_I2S_SPI2_MODE)
#error "I2S2 RX and TX mode not supported in this driver implementation"
#endif
#if STM32_I2S_RX_ENABLED(STM32_I2S_SPI3_MODE) && \
STM32_I2S_TX_ENABLED(STM32_I2S_SPI3_MODE)
#error "I2S3 RX and TX mode not supported in this driver implementation"
#endif
#if STM32_I2S_USE_SPI2 && !STM32_HAS_SPI2
#error "SPI2 not present in the selected device"
#endif
#if STM32_I2S_USE_SPI3 && !STM32_HAS_SPI3
#error "SPI3 not present in the selected device"
#endif
#if !STM32_I2S_USE_SPI2 && !STM32_I2S_USE_SPI3
#error "I2S driver activated but no SPI peripheral assigned"
#endif
#if STM32_I2S_USE_SPI2 && \
!CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_I2S_SPI2_IRQ_PRIORITY)
#error "Invalid IRQ priority assigned to SPI2"
#endif
#if STM32_I2S_USE_SPI3 && \
!CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_I2S_SPI3_IRQ_PRIORITY)
#error "Invalid IRQ priority assigned to SPI3"
#endif
#if STM32_I2S_USE_SPI2 && \
!STM32_DMA_IS_VALID_PRIORITY(STM32_I2S_SPI2_DMA_PRIORITY)
#error "Invalid DMA priority assigned to SPI2"
#endif
#if STM32_I2S_USE_SPI3 && \
!STM32_DMA_IS_VALID_PRIORITY(STM32_I2S_SPI3_DMA_PRIORITY)
#error "Invalid DMA priority assigned to SPI3"
#endif
/* The following checks are only required when there is a DMA able to
reassign streams to different channels.*/
#if STM32_ADVANCED_DMA
/* Check on the presence of the DMA streams settings in mcuconf.h.*/
#if STM32_I2S_USE_SPI2 && (!defined(STM32_I2S_SPI2_RX_DMA_STREAM) || \
!defined(STM32_I2S_SPI2_TX_DMA_STREAM))
#error "SPI2 DMA streams not defined"
#endif
#if STM32_I2S_USE_SPI3 && (!defined(STM32_I2S_SPI3_RX_DMA_STREAM) || \
!defined(STM32_I2S_SPI3_TX_DMA_STREAM))
#error "SPI3 DMA streams not defined"
#endif
/* Check on the validity of the assigned DMA channels.*/
#if STM32_I2S_USE_SPI2 && \
!STM32_DMA_IS_VALID_ID(STM32_I2S_SPI2_RX_DMA_STREAM, STM32_SPI2_RX_DMA_MSK)
#error "invalid DMA stream associated to SPI2 RX"
#endif
#if STM32_I2S_USE_SPI2 && \
!STM32_DMA_IS_VALID_ID(STM32_I2S_SPI2_TX_DMA_STREAM, STM32_SPI2_TX_DMA_MSK)
#error "invalid DMA stream associated to SPI2 TX"
#endif
#if STM32_I2S_USE_SPI3 && \
!STM32_DMA_IS_VALID_ID(STM32_I2S_SPI3_RX_DMA_STREAM, STM32_SPI3_RX_DMA_MSK)
#error "invalid DMA stream associated to SPI3 RX"
#endif
#if STM32_I2S_USE_SPI3 && \
!STM32_DMA_IS_VALID_ID(STM32_I2S_SPI3_TX_DMA_STREAM, STM32_SPI3_TX_DMA_MSK)
#error "invalid DMA stream associated to SPI3 TX"
#endif
#endif /* STM32_ADVANCED_DMA */
#if !defined(STM32_DMA_REQUIRED)
#define STM32_DMA_REQUIRED
#endif
/*===========================================================================*/
/* Driver data structures and types. */
/*===========================================================================*/
/**
* @brief Type of a structure representing an I2S driver.
*/
typedef struct I2SDriver I2SDriver;
/**
* @brief I2S notification callback type.
*
* @param[in] i2sp pointer to the @p I2SDriver object
* @param[in] offset offset in buffers of the data to read/write
* @param[in] n number of samples to read/write
*/
typedef void (*i2scallback_t)(I2SDriver *i2sp, size_t offset, size_t n);
/**
* @brief Driver configuration structure.
* @note It could be empty on some architectures.
*/
typedef struct {
/**
* @brief Transmission buffer pointer.
* @note Can be @p NULL if TX is not required.
*/
const void *tx_buffer;
/**
* @brief Receive buffer pointer.
* @note Can be @p NULL if RX is not required.
*/
void *rx_buffer;
/**
* @brief TX and RX buffers size as number of samples.
*/
size_t size;
/**
* @brief Callback function called during streaming.
*/
i2scallback_t end_cb;
/* End of the mandatory fields.*/
/**
* @brief Configuration of the I2SCFGR register.
* @details See the STM32 reference manual, this register is used for
* the I2S configuration, the following bits must not be
* specified because handled directly by the driver:
* - I2SMOD
* - I2SE
* - I2SCFG
* .
*/
int16_t i2scfgr;
/**
* @brief Configuration of the I2SPR register.
* @details See the STM32 reference manual, this register is used for
* the I2S clock setup.
*/
int16_t i2spr;
} I2SConfig;
/**
* @brief Structure representing an I2S driver.
*/
struct I2SDriver {
/**
* @brief Driver state.
*/
i2sstate_t state;
/**
* @brief Current configuration data.
*/
const I2SConfig *config;
/* End of the mandatory fields.*/
/**
* @brief Pointer to the SPIx registers block.
*/
SPI_TypeDef *spi;
/**
* @brief Calculated part of the I2SCFGR register.
*/
uint16_t cfg;
/**
* @brief Receive DMA stream or @p NULL.
*/
const stm32_dma_stream_t *dmarx;
/**
* @brief Transmit DMA stream or @p NULL.
*/
const stm32_dma_stream_t *dmatx;
/**
* @brief RX DMA mode bit mask.
*/
uint32_t rxdmamode;
/**
* @brief TX DMA mode bit mask.
*/
uint32_t txdmamode;
};
/*===========================================================================*/
/* Driver macros. */
/*===========================================================================*/
/*===========================================================================*/
/* External declarations. */
/*===========================================================================*/
#if STM32_I2S_USE_SPI2 && !defined(__DOXYGEN__)
extern I2SDriver I2SD2;
#endif
#if STM32_I2S_USE_SPI3 && !defined(__DOXYGEN__)
extern I2SDriver I2SD3;
#endif
#ifdef __cplusplus
extern "C" {
#endif
void i2s_lld_init(void);
void i2s_lld_start(I2SDriver *i2sp);
void i2s_lld_stop(I2SDriver *i2sp);
void i2s_lld_start_exchange(I2SDriver *i2sp);
void i2s_lld_stop_exchange(I2SDriver *i2sp);
#ifdef __cplusplus
}
#endif
#endif /* HAL_USE_I2S */
#endif /* _I2S_LLD_H_ */
/** @} */