tinySA/boards/RAISONANCE_REVA_STM8S/board.h

/*
    ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
                 2011,2012,2013 Giovanni Di Sirio.

    This file is part of ChibiOS/RT.

    ChibiOS/RT is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 3 of the License, or
    (at your option) any later version.

    ChibiOS/RT is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program.  If not, see <http://www.gnu.org/licenses/>.
*/

#ifndef _BOARD_H_
#define _BOARD_H_

/*
 * Setup for Raisonance REva V3 + STM8S208RB daughter board.
 */

/*
 * Board identifiers.
 */
#define BOARD_REVA_V3_STM8S208RB
#define BOARD_NAME      "Raisonance REva V3 + STM8S208RB"

/*
 * Board frequencies.
 */
#define HSECLK          0

/*
 * MCU model used on the board.
 */
#define STM8S208

/*
 * Pin definitions.
 */
#define PA_OSCIN        1
#define PA_J2_25        2               /* It is also OSCOUT.               */
#define PA_J2_27        3
#define PA_RX           4
#define PA_TX           5

#define PB_LED(n)       (n)
#define PB_LCD_D0       0
#define PB_LCD_D1       1
#define PB_LCD_CSB      2
#define PB_LCD_RESB     3

#define PC_ADC_ETR      0
#define PC_J2_51        1
#define PC_J2_53        2
#define PC_J2_55        3
#define PC_J2_57        4
#define PC_SCK          5
#define PC_MOSI         6
#define PC_MISO         7

#define PD_J2_69        0
#define PD_J2_21        1
#define PD_J2_67        2
#define PD_J2_65        3
#define PD_PWM          4
#define PD_J2_63        5
#define PD_J2_61        6
#define PD_J2_59        7

#define PE_P2_49        0
#define PE_SCL          1
#define PE_SDA          2
#define PE_P2_47        3
#define PE_P2_45        4
#define PE_P2_43        5
#define PE_P2_41        6
#define PE_P2_39        7

#define PF_J2_37        0
#define PF_J2_35        1
#define PF_J2_33        2
#define PF_J2_31        3
#define PF_ANA_IN1      4
#define PF_ANA_IN2      5
#define PF_ANA_TEMP     6
#define PF_ANA_POT      7

#define PG_CAN_TX       0
#define PG_CAN_RX       1
#define PG_BT5          2
#define PG_BT6          3
#define PG_SW4          4
#define PG_SW3          5
#define PG_SW2          6
#define PG_SW1          7

#define PI_J2_71        0

/*
 * Port A initial setup.
 */
#define VAL_GPIOAODR    (1 << PA_TX)    /* PA_TX initially to 1.            */
#define VAL_GPIOADDR    (1 << PA_TX)    /* PA_TX output, others inputs.     */
#define VAL_GPIOACR1    0xFF            /* All pull-up or push-pull.        */
#define VAL_GPIOACR2    0

/*
 * Port B initial setup.
 */
#define VAL_GPIOBODR    0xFF            /* Initially all set to high.       */
#define VAL_GPIOBDDR    0xFF            /* All outputs.                     */
#define VAL_GPIOBCR1    0xFF            /* All push-pull.                   */
#define VAL_GPIOBCR2    0

/*
 * Port C initial setup.
 */
#define VAL_GPIOCODR    0
#define VAL_GPIOCDDR    0               /* All inputs.                      */
#define VAL_GPIOCCR1    0xFF            /* All pull-up.                     */
#define VAL_GPIOCCR2    0

/*
 * Port D initial setup.
 */
#define VAL_GPIODODR    0
#define VAL_GPIODDDR    0               /* All inputs.                      */
#define VAL_GPIODCR1    0xFF            /* All pull-up.                     */
#define VAL_GPIODCR2    0

/*
 * Port E initial setup.
 */
#define VAL_GPIOEODR    0 
#define VAL_GPIOEDDR    0               /* All inputs.                      */
#define VAL_GPIOECR1    0xFF            /* All pull-up.                     */
#define VAL_GPIOECR2    0

/*
 * Port F initial setup.
 */
#define VAL_GPIOFODR    0
#define VAL_GPIOFDDR    0               /* All inputs.                      */
#define VAL_GPIOFCR1    0xFF            /* All pull-up.                     */
#define VAL_GPIOFCR2    0

/*
 * Port G initial setup.
 */
#define VAL_GPIOGODR    (1 << PG_CAN_TX)/* CAN_TX initially to 1.           */
#define VAL_GPIOGDDR    (1 << PG_CAN_TX)/* CAN_TX output, others inputs.    */
#define VAL_GPIOGCR1    0xFF            /* All pull-up or push-pull.        */
#define VAL_GPIOGCR2    0

/*
 * Port H initial setup (dummy, not present).
 */
#define VAL_GPIOHODR    0
#define VAL_GPIOHDDR    0               /* All inputs.                      */
#define VAL_GPIOHCR1    0xFF            /* All pull-up.                     */
#define VAL_GPIOHCR2    0

/*
 * Port I initial setup.
 */
#define VAL_GPIOIODR    0
#define VAL_GPIOIDDR    0               /* All inputs.                      */
#define VAL_GPIOICR1    0xFF            /* All pull-up.                     */
#define VAL_GPIOICR2    0

#if !defined(_FROM_ASM_)
#ifdef __cplusplus
extern "C" {
#endif
  void boardInit(void);
#ifdef __cplusplus
}
#endif
#endif /* _FROM_ASM_ */

#endif /* _BOARD_H_ */