tinySA/boards/ST_STM3210E_EVAL/board.h

252 lines
12 KiB
C
Raw Normal View History

/*
ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
#ifndef _BOARD_H_
#define _BOARD_H_
/*
* Setup for the STMicroelectronics STM3210E-EVAL evaluation board.
*/
/*
* Board identifier.
*/
#define BOARD_ST_STM3210E_EVAL
#define BOARD_NAME "ST STM3210E-EVAL"
/*
* Board frequencies.
*/
#define STM32_LSECLK 32768
#define STM32_HSECLK 8000000
/*
* MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h.
* Note: Older board revisions should define STM32F10X_HD instead, please
* verify the STM32 model mounted on your board. The change also
* affects your linker script.
*/
#define STM32F10X_XL
/*
* IO pins assignments.
*/
#define GPIOA_WAKEUP_BUTTON 0
#define GPIOB_SC_3V_5V 0
#define GPIOB_SPI1_CS 2
#define GPIOB_TEMP_INT 5
#define GPIOB_USB_DISC 14
#define GPIOC_SC_CMDVCC 6
#define GPIOC_SC_OFF 7
#define GPIOC_TAMPER_BUTTON 13
#define GPIOD_JOY_DOWN 3
#define GPIOF_LED1 6
#define GPIOF_LED2 7
#define GPIOF_LED3 8
#define GPIOF_LED4 9
#define GPIOF_SD_DETECT 11
#define GPIOG_JOY_SEL 7
#define GPIOG_USER_BUTTON 8
#define GPIOG_JOY_RIGHT 13
#define GPIOG_JOY_LEFT 14
#define GPIOG_JOY_UP 15
/*
* I/O ports initial setup, this configuration is established soon after reset
* in the initialization code.
* Please refer to the STM32 Reference Manual for details.
*/
#define PIN_ANALOG(n) (0 << (((n) & 7) * 4))
#define PIN_OUTPUT_PP_10(n) (1 << (((n) & 7) * 4))
#define PIN_OUTPUT_PP_2(n) (2 << (((n) & 7) * 4))
#define PIN_OUTPUT_PP_50(n) (3 << (((n) & 7) * 4))
#define PIN_INPUT(n) (4 << (((n) & 7) * 4))
#define PIN_OUTPUT_OD_10(n) (5 << (((n) & 7) * 4))
#define PIN_OUTPUT_OD_2(n) (6 << (((n) & 7) * 4))
#define PIN_OUTPUT_OD_50(n) (7 << (((n) & 7) * 4))
#define PIN_INPUT_PUD(n) (8 << (((n) & 7) * 4))
#define PIN_ALTERNATE_PP_10(n) (9 << (((n) & 7) * 4))
#define PIN_ALTERNATE_PP_2(n) (10 << (((n) & 7) * 4))
#define PIN_ALTERNATE_PP_50(n) (11 << (((n) & 7) * 4))
#define PIN_ALTERNATE_OD_10(n) (13 << (((n) & 7) * 4))
#define PIN_ALTERNATE_OD_2(n) (14 << (((n) & 7) * 4))
#define PIN_ALTERNATE_OD_50(n) (15 << (((n) & 7) * 4))
#define PIN_UNDEFINED(n) PIN_INPUT_PUD(n)
/*
* Port A setup.
*/
#define VAL_GPIOACRL (PIN_INPUT(0) | /* Wakeup Button. */ \
PIN_OUTPUT_PP_50(1) | /* USART2_RTS. */ \
PIN_ALTERNATE_PP_50(2) | /* USART2_TX. */ \
PIN_INPUT(3) | /* USART2_RX. */ \
PIN_UNDEFINED(4) | \
PIN_ALTERNATE_PP_50(5) | /* SPI1_SCK. */ \
PIN_INPUT(6) | /* SPI1_MISO. */ \
PIN_ALTERNATE_PP_50(7)) /* SPI1_MOSI. */
#define VAL_GPIOACRH (PIN_ALTERNATE_PP_50(8) | /* MCO. */ \
PIN_ALTERNATE_PP_50(9) | /* USART1_TX. */ \
PIN_INPUT(10) | /* USART1_RX. */ \
PIN_INPUT_PUD(11) | /* USB_DM. */ \
PIN_INPUT_PUD(12) | /* USB_DP. */ \
PIN_INPUT(13) | /* TMS. */ \
PIN_INPUT(14) | /* TCK. */ \
PIN_INPUT(15)) /* TDI. */
#define VAL_GPIOAODR 0xFFFFFFFF
/*
* Port B setup.
*/
#define VAL_GPIOBCRL (PIN_OUTPUT_PP_50(0) | /* SmartCard_3/5V. */ \
PIN_INPUT_PUD(1) | /* Unconnected. */ \
PIN_OUTPUT_PP_50(2) | /* SPI1_CS. */ \
PIN_INPUT(3) | /* TDO. */ \
PIN_INPUT(4) | /* TRST. */ \
PIN_INPUT_PUD(5) | /* Temp.Sensor INT. */ \
PIN_ALTERNATE_OD_50(6) | /* I2C1_SCK. */ \
PIN_ALTERNATE_OD_50(7)) /* I2C1_SDA. */
#define VAL_GPIOBCRH (PIN_INPUT(8) | /* CAN_RX. */ \
PIN_ALTERNATE_PP_50(9) | /* CAN_TX. */ \
PIN_ALTERNATE_OD_50(10)| /* SmartCard IO. */ \
PIN_OUTPUT_PP_50(11) | /* SmartCard RST. */ \
PIN_ALTERNATE_PP_50(12)| /* SmartCard CLK. */ \
PIN_UNDEFINED(13) | \
PIN_OUTPUT_PP_50(14) | /* USB disconnect. */ \
PIN_UNDEFINED(15))
#define VAL_GPIOBODR 0xFFFFFFFF
/*
* Port C setup.
*/
#define VAL_GPIOCCRL (PIN_UNDEFINED(0) | \
PIN_UNDEFINED(1) | \
PIN_UNDEFINED(2) | \
PIN_UNDEFINED(3) | \
PIN_ANALOG(4) | /* Potentiometer. */ \
PIN_UNDEFINED(5) | \
PIN_OUTPUT_PP_50(6) | /* SmartCard CMDVCC. */ \
PIN_INPUT(7)) /* SmartCard OFF. */
#define VAL_GPIOCCRH (PIN_ALTERNATE_PP_50(8) | /* SDIO D0. */ \
PIN_ALTERNATE_PP_50(9) | /* SDIO D1. */ \
PIN_ALTERNATE_PP_50(10)| /* SDIO D2. */ \
PIN_ALTERNATE_PP_50(11)| /* SDIO D3. */ \
PIN_ALTERNATE_PP_50(12)| /* SDIO CLK. */ \
PIN_INPUT(13) | /* Tamper Button. */ \
PIN_INPUT(14) | /* OSC IN. */ \
PIN_INPUT(15)) /* OSC OUT. */
#define VAL_GPIOCODR 0xFFFFFFFF
/*
* Port D setup
*/
#define VAL_GPIODCRL (PIN_ALTERNATE_PP_50(0) | /* FSMC_D2. */ \
PIN_ALTERNATE_PP_50(1) | /* FSMC_D3. */ \
PIN_ALTERNATE_PP_50(2) | /* SDIO CMD. */ \
PIN_INPUT(3) | /* Joy Down. */ \
PIN_ALTERNATE_PP_50(4) | /* FSMC_NOE. */ \
PIN_ALTERNATE_PP_50(5) | /* FSMC_NWE. */ \
PIN_INPUT(6) | /* FSMC_NWAIT. */ \
PIN_ALTERNATE_PP_50(7)) /* FSMC_NCE2. */
#define VAL_GPIODCRH (PIN_ALTERNATE_PP_50(8) | /* FSMC_D13. */ \
PIN_ALTERNATE_PP_50(9) | /* FSMC_D14. */ \
PIN_ALTERNATE_PP_50(10)| /* FSMC_D15. */ \
PIN_ALTERNATE_PP_50(11)| /* FSMC_A16. */ \
PIN_ALTERNATE_PP_50(12)| /* FSMC_A17. */ \
PIN_ALTERNATE_PP_50(13)| /* FSMC_A18. */ \
PIN_ALTERNATE_PP_50(14)| /* FSMC_D0. */ \
PIN_ALTERNATE_PP_50(15)) /* FSMC_D1. */
#define VAL_GPIODODR 0xFFFFFFFF
/*
* Port E setup.
*/
#define VAL_GPIOECRL (PIN_ALTERNATE_PP_50(0) | /* FSMC_NBL0. */ \
PIN_ALTERNATE_PP_50(1) | /* FSMC_NBL1. */ \
PIN_ALTERNATE_PP_50(2) | /* FSMC_A23. */ \
PIN_ALTERNATE_PP_50(3) | /* FSMC_A19. */ \
PIN_ALTERNATE_PP_50(4) | /* FSMC_A20. */ \
PIN_ALTERNATE_PP_50(5) | /* FSMC_A21. */ \
PIN_ALTERNATE_PP_50(6) | /* FSMC_A22. */ \
PIN_ALTERNATE_PP_50(7)) /* FSMC_D4. */
#define VAL_GPIOECRH (PIN_ALTERNATE_PP_50(8) | /* FSMC_D5. */ \
PIN_ALTERNATE_PP_50(9) | /* FSMC_D6. */ \
PIN_ALTERNATE_PP_50(10)| /* FSMC_D7. */ \
PIN_ALTERNATE_PP_50(11)| /* FSMC_D8. */ \
PIN_ALTERNATE_PP_50(12)| /* FSMC_D9. */ \
PIN_ALTERNATE_PP_50(13)| /* FSMC_D10. */ \
PIN_ALTERNATE_PP_50(14)| /* FSMC_D11. */ \
PIN_ALTERNATE_PP_50(15)) /* FSMC_D12. */
#define VAL_GPIOEODR 0xFFFFFFFF
/*
* Port F setup.
*/
#define VAL_GPIOFCRL (PIN_ALTERNATE_PP_50(0) | /* FSMC_A0. */ \
PIN_ALTERNATE_PP_50(1) | /* FSMC_A1. */ \
PIN_ALTERNATE_PP_50(2) | /* FSMC_A2. */ \
PIN_ALTERNATE_PP_50(3) | /* FSMC_A3. */ \
PIN_ALTERNATE_PP_50(4) | /* FSMC_A4. */ \
PIN_ALTERNATE_PP_50(5) | /* FSMC_A5. */ \
PIN_OUTPUT_PP_50(6) | /* LED1. */ \
PIN_OUTPUT_PP_50(7)) /* LED2. */
#define VAL_GPIOFCRH (PIN_OUTPUT_PP_50(8) | /* LED3. */ \
PIN_OUTPUT_PP_50(9) | /* LED4. */ \
PIN_UNDEFINED(10) | \
PIN_INPUT_PUD(11) | /* SDCard detect. */ \
PIN_ALTERNATE_PP_50(12)| /* FSMC_A6. */ \
PIN_ALTERNATE_PP_50(13)| /* FSMC_A7. */ \
PIN_ALTERNATE_PP_50(14)| /* FSMC_A8. */ \
PIN_ALTERNATE_PP_50(15)) /* FSMC_A9. */
#define VAL_GPIOFODR 0xFFFFFC3F
/*
* Port G setup.
*/
#define VAL_GPIOGCRL (PIN_ALTERNATE_PP_50(0) | /* FSMC_A10. */ \
PIN_ALTERNATE_PP_50(1) | /* FSMC_A11. */ \
PIN_ALTERNATE_PP_50(2) | /* FSMC_A12. */ \
PIN_ALTERNATE_PP_50(3) | /* FSMC_A13. */ \
PIN_ALTERNATE_PP_50(4) | /* FSMC_A14. */ \
PIN_ALTERNATE_PP_50(5) | /* FSMC_A15. */ \
PIN_INPUT(6) | /* FSMC_INT2. */ \
PIN_INPUT(7)) /* Joy Select. */
#define VAL_GPIOGCRH (PIN_INPUT(8) | /* User Button. */ \
PIN_ALTERNATE_PP_50(9) | /* FSMC_NE2. */ \
PIN_ALTERNATE_PP_50(10)| /* FSMC_NE3. */ \
PIN_OUTPUT_PP_50(11) | /* Audio PDN. */ \
PIN_ALTERNATE_PP_50(12)| /* FSMC_NE4. */ \
PIN_INPUT(13) | /* Joy Right. */ \
PIN_INPUT(14) | /* Joy Left. */ \
PIN_INPUT(15)) /* Joy Up. */
#define VAL_GPIOGODR 0xFFFFF7FF
#if !defined(_FROM_ASM_)
#ifdef __cplusplus
extern "C" {
#endif
void boardInit(void);
#ifdef __cplusplus
}
#endif
#endif /* _FROM_ASM_ */
#endif /* _BOARD_H_ */