tinySA/os/hal/platforms/STM32/RTCv1/rtc_lld.c

/*
    ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
                 2011,2012,2013 Giovanni Di Sirio.

    This file is part of ChibiOS/RT.

    ChibiOS/RT is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 3 of the License, or
    (at your option) any later version.

    ChibiOS/RT is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program.  If not, see <http://www.gnu.org/licenses/>.
*/
/*
   Concepts and parts of this file have been contributed by Uladzimir Pylinsky
   aka barthess.
 */

/**
 * @file    STM32/RTCv1/rtc_lld.c
 * @brief   STM32 RTC subsystem low level driver header.
 *
 * @addtogroup RTC
 * @{
 */

#include "ch.h"
#include "hal.h"

#if HAL_USE_RTC || defined(__DOXYGEN__)

/*===========================================================================*/
/* Driver local definitions.                                                 */
/*===========================================================================*/

/*===========================================================================*/
/* Driver exported variables.                                                */
/*===========================================================================*/

/**
 * @brief RTC driver identifier.
 */
RTCDriver RTCD1;

/*===========================================================================*/
/* Driver local variables.                                                   */
/*===========================================================================*/

/*===========================================================================*/
/* Driver local functions.                                                   */
/*===========================================================================*/

/**
 * @brief   Wait for synchronization of RTC registers with APB1 bus.
 * @details This function must be invoked before trying to read RTC registers
 *          in the backup domain: DIV, CNT, ALR. CR registers can always
 *          be read.
 *
 * @notapi
 */
#define rtc_lld_apb1_sync() {while ((RTC->CRL & RTC_CRL_RSF) == 0);}

/**
 * @brief   Wait for for previous write operation complete.
 * @details This function must be invoked before writing to any RTC registers
 *
 * @notapi
 */
#define rtc_lld_wait_write() {while ((RTC->CRL & RTC_CRL_RTOFF) == 0);}

/**
 * @brief   Acquires write access to RTC registers.
 * @details Before writing to the backup domain RTC registers the previous
 *          write operation must be completed. Use this function before
 *          writing to PRL, CNT, ALR registers.
 *
 * @notapi
 */
#define rtc_lld_acquire() {rtc_lld_wait_write(); RTC->CRL |= RTC_CRL_CNF;}

/**
 * @brief   Releases write access to RTC registers.
 *
 * @notapi
 */
#define rtc_lld_release() {RTC->CRL &= ~RTC_CRL_CNF;}

/*===========================================================================*/
/* Driver interrupt handlers.                                                */
/*===========================================================================*/

/**
 * @brief   RTC interrupt handler.
 *
 * @isr
 */
CH_IRQ_HANDLER(RTC_IRQHandler) {
  uint16_t flags;

  CH_IRQ_PROLOGUE();

  /* This wait works only when AHB1 bus was previously powered off by any
     reason (standby, reset, etc). In other cases it does nothing.*/
  rtc_lld_apb1_sync();

  /* Mask of all enabled and pending sources.*/
  flags = RTC->CRH & RTC->CRL;
  RTC->CRL &= ~(RTC_CRL_SECF | RTC_CRL_ALRF | RTC_CRL_OWF);

  if (flags & RTC_CRL_SECF)
    RTCD1.callback(&RTCD1, RTC_EVENT_SECOND);

  if (flags & RTC_CRL_ALRF)
    RTCD1.callback(&RTCD1, RTC_EVENT_ALARM);

  if (flags & RTC_CRL_OWF)
    RTCD1.callback(&RTCD1, RTC_EVENT_OVERFLOW);

  CH_IRQ_EPILOGUE();
}

/*===========================================================================*/
/* Driver exported functions.                                                */
/*===========================================================================*/

/**
 * @brief   Load value of RTCCLK to prescaler registers.
 * @note    The pre-scaler must not be set on every reset as RTC clock
 *          counts are lost when it is set.
 * @note    This function designed to be called from
 *          hal_lld_backup_domain_init(). Because there is only place
 *          where possible to detect BKP domain reset event reliably.
 *
 * @notapi
 */
void rtc_lld_set_prescaler(void){
  rtc_lld_acquire();
  RTC->PRLH = (uint16_t)((STM32_RTCCLK - 1) >> 16) & 0x000F;
  RTC->PRLL = (uint16_t)(((STM32_RTCCLK - 1))      & 0xFFFF);
  rtc_lld_release();
}

/**
 * @brief   Initialize RTC.
 *
 * @notapi
 */
void rtc_lld_init(void){

  /* RSF bit must be cleared by software after an APB1 reset or an APB1 clock
     stop. Otherwise its value will not be actual. */
  RTC->CRL &= ~RTC_CRL_RSF;

  /* Required because access to PRL.*/
  rtc_lld_apb1_sync();

  /* All interrupts initially disabled.*/
  rtc_lld_wait_write();
  RTC->CRH = 0;

  /* Callback initially disabled.*/
  RTCD1.callback = NULL;

  /* IRQ vector permanently assigned to this driver.*/
  nvicEnableVector(RTC_IRQn, CORTEX_PRIORITY_MASK(STM32_RTC_IRQ_PRIORITY));
}

/**
 * @brief   Set current time.
 * @note    Fractional part will be silently ignored. There is no possibility
 *          to change it on STM32F1xx platform.
 *
 * @param[in] rtcp      pointer to RTC driver structure
 * @param[in] timespec  pointer to a @p RTCTime structure
 *
 * @notapi
 */
void rtc_lld_set_time(RTCDriver *rtcp, const RTCTime *timespec) {

  (void)rtcp;

  rtc_lld_acquire();
  RTC->CNTH = (uint16_t)(timespec->tv_sec >> 16);
  RTC->CNTL = (uint16_t)(timespec->tv_sec & 0xFFFF);
  rtc_lld_release();
}

/**
 * @brief   Get current time.
 *
 * @param[in] rtcp      pointer to RTC driver structure
 * @param[in] timespec  pointer to a @p RTCTime structure
 *
 * @notapi
 */
void rtc_lld_get_time(RTCDriver *rtcp, RTCTime *timespec) {
  (void)rtcp;

  uint32_t time_frac;

  /* Required because access to CNT and DIV.*/
  rtc_lld_apb1_sync();

  /* Loops until two consecutive read returning the same value.*/
  do {
    timespec->tv_sec = ((uint32_t)(RTC->CNTH) << 16) + RTC->CNTL;
    time_frac = (((uint32_t)RTC->DIVH) << 16) + (uint32_t)RTC->DIVL;
  } while ((timespec->tv_sec) != (((uint32_t)(RTC->CNTH) << 16) + RTC->CNTL));

  timespec->tv_msec = (uint16_t)(((STM32_RTCCLK - 1 - time_frac) * 1000) /
                                 STM32_RTCCLK);
}

/**
 * @brief   Set alarm time.
 *
 * @note      Default value after BKP domain reset is 0xFFFFFFFF
 *
 * @param[in] rtcp      pointer to RTC driver structure
 * @param[in] alarm     alarm identifier
 * @param[in] alarmspec pointer to a @p RTCAlarm structure
 *
 * @notapi
 */
void rtc_lld_set_alarm(RTCDriver *rtcp,
                       rtcalarm_t alarm,
                       const RTCAlarm *alarmspec) {

  (void)rtcp;
  (void)alarm;

  rtc_lld_acquire();
  if (alarmspec != NULL) {
    RTC->ALRH = (uint16_t)(alarmspec->tv_sec >> 16);
    RTC->ALRL = (uint16_t)(alarmspec->tv_sec & 0xFFFF);
  }
  else {
    RTC->ALRH = 0;
    RTC->ALRL = 0;
  }
  rtc_lld_release();
}

/**
 * @brief   Get current alarm.
 * @note    If an alarm has not been set then the returned alarm specification
 *          is not meaningful.
 *
 * @note    Default value after BKP domain reset is 0xFFFFFFFF.
 *
 * @param[in] rtcp      pointer to RTC driver structure
 * @param[in] alarm     alarm identifier
 * @param[out] alarmspec pointer to a @p RTCAlarm structure
 *
 * @notapi
 */
void rtc_lld_get_alarm(RTCDriver *rtcp,
                       rtcalarm_t alarm,
                       RTCAlarm *alarmspec) {

  (void)rtcp;
  (void)alarm;

  /* Required because access to ALR.*/
  rtc_lld_apb1_sync();

  alarmspec->tv_sec = ((RTC->ALRH << 16) + RTC->ALRL);
}

/**
 * @brief   Enables or disables RTC callbacks.
 * @details This function enables or disables callbacks, use a @p NULL pointer
 *          in order to disable a callback.
 *
 * @param[in] rtcp      pointer to RTC driver structure
 * @param[in] callback  callback function pointer or @p NULL
 *
 * @notapi
 */
void rtc_lld_set_callback(RTCDriver *rtcp, rtccb_t callback) {

  if (callback != NULL) {

    /* IRQ sources enabled only after setting up the callback.*/
    rtcp->callback = callback;

    rtc_lld_wait_write();
    RTC->CRL &= ~(RTC_CRL_OWF | RTC_CRL_ALRF | RTC_CRL_SECF);
    RTC->CRH = RTC_CRH_OWIE | RTC_CRH_ALRIE | RTC_CRH_SECIE;
  }
  else {
    rtc_lld_wait_write();
    RTC->CRH = 0;

    /* Callback set to NULL only after disabling the IRQ sources.*/
    rtcp->callback = NULL;
  }
}

#include "chrtclib.h"

/**
 * @brief   Get current time in format suitable for usage in FatFS.
 *
 * @param[in] rtcp      pointer to RTC driver structure
 * @return              FAT time value.
 *
 * @api
 */
uint32_t rtc_lld_get_time_fat(RTCDriver *rtcp) {
  uint32_t fattime;
  struct tm timp;

  rtcGetTimeTm(rtcp, &timp);

  fattime  = (timp.tm_sec)       >> 1;
  fattime |= (timp.tm_min)       << 5;
  fattime |= (timp.tm_hour)      << 11;
  fattime |= (timp.tm_mday)      << 16;
  fattime |= (timp.tm_mon + 1)   << 21;
  fattime |= (timp.tm_year - 80) << 25;

  return fattime;
}
#endif /* HAL_USE_RTC */

/** @} */