tinySA/boards/EA_LPCXPRESSO_BB_1343/board.c

/*
    ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
                 2011,2012 Giovanni Di Sirio.

    This file is part of ChibiOS/RT.

    ChibiOS/RT is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 3 of the License, or
    (at your option) any later version.

    ChibiOS/RT is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program.  If not, see <http://www.gnu.org/licenses/>.
*/

#include "ch.h"
#include "hal.h"

/**
 * @brief   PAL setup.
 * @details Digital I/O ports static configuration as defined in @p board.h.
 *          This variable is used by the HAL when initializing the PAL driver.
 */
#if HAL_USE_PAL || defined(__DOXYGEN__)
const PALConfig pal_default_config = {
 {VAL_GPIO0DATA, VAL_GPIO0DIR},
 {VAL_GPIO1DATA, VAL_GPIO1DIR},
 {VAL_GPIO2DATA, VAL_GPIO2DIR},
 {VAL_GPIO3DATA, VAL_GPIO3DIR},
};
#endif

/*
 * Early initialization code.
 * This initialization must be performed just after stack setup and before
 * any other initialization.
 */
void __early_init(void) {

  LPC13xx_clock_init();
}

/*
 * Board-specific initialization code.
 */
void boardInit(void) {

  /*
   * Extra, board-specific, initializations.
   * NOTE: PIO1_2 is associated also to the JTAG, if you need to use JTAG
   *       you must comment that line first.
   */
  LPC_IOCON->PIO0_7 = 0xC0;             /* Disables pull-up on LED2 output. */
  LPC_IOCON->JTAG_nTRST_PIO1_2 = 0xC1;  /* Disables pull-up on LED3B output
                                           and makes it GPIO1_2.            */
  LPC_IOCON->PIO1_9 = 0xC0;             /* Disables pull-up on LED3R output.*/
  LPC_IOCON->PIO1_10 = 0xC0;            /* Disables pull-up on LED3G output.*/
}