30 lines
1.1 KiB
Plaintext
30 lines
1.1 KiB
Plaintext
|
*****************************************************************************
|
||
|
|
** ChibiOS/RT port for Texas Instruments MSP430X. **
|
||
|
|
*****************************************************************************
|
||
|
|
|
||
|
|
** TARGET **
|
||
|
|
|
||
|
|
The demo runs on an customized MSP430-F5437 board with a 32768kHz XTAL1
|
||
|
|
installed. DCOCLK (=MCLK, =SMCLK) is set up to 20Mhz. From mcuconf.h:
|
||
|
|
#define MSP430_USE_CLOCK MSP430_CLOCK_SOURCE_DCOCLK
|
||
|
|
|
||
|
|
UART0 (38400/8N1) ist used for printing some board information.
|
||
|
|
|
||
|
|
** The Demo **
|
||
|
|
|
||
|
|
The demo runs first some tests, just to check port correctness. Meanwhile,
|
||
|
|
green led light. After that the board red and green leds will flash in the
|
||
|
|
cycle of ~0.5 and ~1.5 seconds respectively.
|
||
|
|
|
||
|
|
** Build Procedure **
|
||
|
|
|
||
|
|
The demo was built using the
|
||
|
|
a) IAR for MSP430 5.10.1 (5.10.1.50144) toolchain;
|
||
|
|
b) GCC version 4.6.3 20120301 (mspgcc LTS 20120406 unpatched).
|
||
|
|
|
||
|
|
*** Notes ***
|
||
|
|
|
||
|
|
On porting to an another MSP430X-MCU remember to check your linker settings
|
||
|
|
for __heap_base__ and __heap_end__ symbols (or redefine these in
|
||
|
|
asmdefines.s43).
|