tinySA/os/hal/platforms/SPC564Axx/hal_lld.h

/*
    SPC5 HAL - Copyright (C) 2013 STMicroelectronics

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at

        http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.
*/

/**
 * @file    SPC564Axx/hal_lld.h
 * @brief   SPC564Axx HAL subsystem low level driver header.
 * @pre     This module requires the following macros to be defined in the
 *          @p board.h file:
 *          - SPC5_XOSC_CLK.
 *          .
 *
 * @addtogroup HAL
 * @{
 */

#ifndef _HAL_LLD_H_
#define _HAL_LLD_H_

#include "xpc564a.h"
#include "spc564a_registry.h"

/*===========================================================================*/
/* Driver constants.                                                         */
/*===========================================================================*/

/**
 * @brief   Defines the support for realtime counters in the HAL.
 */
#define HAL_IMPLEMENTS_COUNTERS FALSE

/**
 * @brief   Platform name.
 */
#define PLATFORM_NAME           "SPC564Axx Powertrain"

/**
 * @name    ESYNCR2 register definitions
 * @{
 */
#define SPC5_RFD_DIV2           0           /**< Divide VCO frequency by 2. */
#define SPC5_RFD_DIV4           1           /**< Divide VCO frequency by 4. */
#define SPC5_RFD_DIV8           2           /**< Divide VCO frequency by 8. */
#define SPC5_RFD_DIV16          3           /**< Divide VCO frequency by 16.*/
/** @} */

/**
 * @name    BIUCR register definitions
 * @{
 */
#define BIUCR_BANK1_TOO         0x01000000  /**< Use settings for bank1 too.*/
#define BIUCR_MASTER7_PREFETCH  0x00800000  /**< Enable master 7 prefetch.  */
#define BIUCR_MASTER6_PREFETCH  0x00400000  /**< Enable master 6 prefetch.  */
#define BIUCR_MASTER5_PREFETCH  0x00200000  /**< Enable master 5 prefetch.  */
#define BIUCR_MASTER4_PREFETCH  0x00100000  /**< Enable master 4 prefetch.  */
#define BIUCR_MASTER3_PREFETCH  0x00080000  /**< Enable master 3 prefetch.  */
#define BIUCR_MASTER2_PREFETCH  0x00040000  /**< Enable master 2 prefetch.  */
#define BIUCR_MASTER1_PREFETCH  0x00020000  /**< Enable master 1 prefetch.  */
#define BIUCR_MASTER0_PREFETCH  0x00010000  /**< Enable master 0 prefetch.  */
#define BIUCR_APC_MASK          0x0000E000  /**< APC field mask.            */
#define BIUCR_APC_0             (0 << 13)   /**< No additional hold cycles. */
#define BIUCR_APC_1             (1 << 13)   /**< 1 additional hold cycle.   */
#define BIUCR_APC_2             (2 << 13)   /**< 2 additional hold cycles.  */
#define BIUCR_APC_3             (3 << 13)   /**< 3 additional hold cycles.  */
#define BIUCR_APC_4             (4 << 13)   /**< 4 additional hold cycles.  */
#define BIUCR_APC_5             (5 << 13)   /**< 5 additional hold cycles.  */
#define BIUCR_APC_6             (6 << 13)   /**< 6 additional hold cycles.  */
#define BIUCR_WWSC_MASK         0x00001800  /**< WWSC field mask.           */
#define BIUCR_WWSC_0            (0 << 11)   /**< No write wait states.      */
#define BIUCR_WWSC_1            (1 << 11)   /**< 1 write wait state.        */
#define BIUCR_WWSC_2            (2 << 11)   /**< 2 write wait states.       */
#define BIUCR_WWSC_3            (3 << 11)   /**< 3 write wait states.       */
#define BIUCR_RWSC_MASK         0x00001800  /**< RWSC field mask.           */
#define BIUCR_RWSC_0            (0 << 8)    /**< No read wait states.       */
#define BIUCR_RWSC_1            (1 << 8)    /**< 1 read wait state.         */
#define BIUCR_RWSC_2            (2 << 8)    /**< 2 read wait states.        */
#define BIUCR_RWSC_3            (3 << 8)    /**< 3 read wait states.        */
#define BIUCR_RWSC_4            (4 << 8)    /**< 4 read wait states.        */
#define BIUCR_RWSC_5            (5 << 8)    /**< 5 read wait states.        */
#define BIUCR_RWSC_6            (6 << 8)    /**< 6 read wait states.        */
#define BIUCR_RWSC_7            (7 << 8)    /**< 7 read wait states.        */
#define BIUCR_DPFEN             0x00000040  /**< Data prefetch enable.      */
#define BIUCR_IPFEN             0x00000010  /**< Instr. prefetch enable.    */
#define BIUCR_PFLIM_MASK        0x00000060  /**< PFLIM field mask.          */
#define BIUCR_PFLIM_NO          (0 << 1)    /**< No prefetching.            */
#define BIUCR_PFLIM_ON_MISS     (1 << 1)    /**< Prefetch on miss.          */
#define BIUCR_PFLIM_ON_HITMISS  (2 << 1)    /**< Prefetch on hit and miss.  */
#define BIUCR_BFEN              0x00000001  /**< Flash buffering enable.    */
/** @} */

/*===========================================================================*/
/* Driver pre-compile time settings.                                         */
/*===========================================================================*/

/**
 * @brief   Disables the clocks initialization in the HAL.
 */
#if !defined(SPC5_NO_INIT) || defined(__DOXYGEN__)
#define SPC5_NO_INIT                        FALSE
#endif

/**
 * @brief   Clock bypass.
 * @note    If set to @p TRUE then the PLL is not started and initialized, the
 *          external clock is used as-is and the other clock-related settings
 *          are ignored.
 */
#if !defined(SPC5_CLK_BYPASS) || defined(__DOXYGEN__)
#define SPC5_CLK_BYPASS                     FALSE
#endif

/**
 * @brief   Disables the overclock checks.
 */
#if !defined(SPC5_ALLOW_OVERCLOCK) || defined(__DOXYGEN__)
#define SPC5_ALLOW_OVERCLOCK                FALSE
#endif

/**
 * @brief   External clock pre-divider.
 * @note    Must be in range 1...15.
 */
#if !defined(SPC5_CLK_PREDIV_VALUE) || defined(__DOXYGEN__)
#define SPC5_CLK_PREDIV_VALUE               2
#endif

/**
 * @brief   Multiplication factor divider.
 * @note    Must be in range 32...96.
 */
#if !defined(SPC5_CLK_MFD_VALUE) || defined(__DOXYGEN__)
#define SPC5_CLK_MFD_VALUE                  75
#endif

/**
 * @brief   Reduced frequency divider.
 */
#if !defined(SPC5_CLK_RFD) || defined(__DOXYGEN__)
#define SPC5_CLK_RFD                        RFD_DIV2
#endif

/**
 * @brief   Flash buffer and prefetching settings.
 * @note    Please refer to the SPC563M64 reference manual about the meaning
 *          of the following bits, if in doubt DO NOT MODIFY IT.
 * @note    Do not specify the APC, WWSC, RWSC bits in this value because
 *          those are calculated from the system clock and ORed with this
 *          value.
 */
#if !defined(SPC5_FLASH_BIUCR) || defined(__DOXYGEN__)
#define SPC5_FLASH_BIUCR                    (BIUCR_BANK1_TOO |              \
                                             BIUCR_MASTER4_PREFETCH |       \
                                             BIUCR_MASTER0_PREFETCH |       \
                                             BIUCR_DPFEN |                  \
                                             BIUCR_IPFEN |                  \
                                             BIUCR_PFLIM_ON_MISS |          \
                                             BIUCR_BFEN)
#endif

/*===========================================================================*/
/* Derived constants and error checks.                                       */
/*===========================================================================*/

/*
 * Configuration-related checks.
 */
#if !defined(SPC564Axx_MCUCONF)
#error "Using a wrong mcuconf.h file, SPC564Axx_MCUCONF not defined"
#endif

#if (SPC5_CLK_PREDIV_VALUE < 1) || (SPC5_CLK_PREDIV_VALUE > 15)
#error "invalid SPC5_CLK_PREDIV_VALUE value specified"
#endif

#if (SPC5_CLK_MFD_VALUE < 32) || (SPC5_CLK_MFD_VALUE > 96)
#error "invalid SPC5_CLK_MFD_VALUE value specified"
#endif

#if (SPC5_CLK_RFD != SPC5_RFD_DIV2) && (SPC5_CLK_RFD != SPC5_RFD_DIV4) &&   \
    (SPC5_CLK_RFD != SPC5_RFD_DIV8) && (SPC5_CLK_RFD != SPC5_RFD_DIV16)
#error "invalid SPC5_CLK_RFD value specified"
#endif

/**
 * @brief   PLL input divider.
 */
#define SPC5_CLK_PREDIV     (SPC5_CLK_PREDIV_VALUE - 1)

/**
 * @brief   PLL multiplier.
 */
#define SPC5_CLK_MFD        (SPC5_CLK_MFD_VALUE)

/**
 * @brief   PLL output clock.
 */
#define SPC5_PLLCLK         ((SPC5_XOSC_CLK / SPC5_CLK_PREDIV_VALUE) *      \
                             SPC5_CLK_MFD_VALUE)

#if (SPC5_PLLCLK < 256000000) || (SPC5_PLLCLK > 512000000)
#error "VCO frequency out of the acceptable range (256...512)"
#endif

/**
 * @brief   PLL output clock.
 */
#if !SPC5_CLK_BYPASS || defined(__DOXYGEN__)
#define SPC5_SYSCLK         (SPC5_PLLCLK / (1 << (SPC5_CLK_RFD + 1)))
#else
#define SPC5_SYSCLK         SPC5_XOSC_CLK
#endif

#if (SPC5_SYSCLK > 150000000) && !SPC5_ALLOW_OVERCLOCK
#error "System clock above maximum rated frequency (150MHz)"
#endif

/**
 * @brief   Flash wait states are a function of the system clock.
 */
#if (SPC5_SYSCLK <= 20000000) || defined(__DOXYGEN__)
#define SPC5_FLASH_WS       (BIUCR_APC_0 | BIUCR_RWSC_0 | BIUCR_WWSC_3)
#elif SPC5_SYSCLK <= 61000000
#define SPC5_FLASH_WS       (BIUCR_APC_1 | BIUCR_RWSC_1 | BIUCR_WWSC_3)
#elif SPC5_SYSCLK <= 90000000
#define SPC5_FLASH_WS       (BIUCR_APC_2 | BIUCR_RWSC_2 | BIUCR_WWSC_3)
#elif SPC5_SYSCLK <= 123000000
#define SPC5_FLASH_WS       (BIUCR_APC_3 | BIUCR_RWSC_3 | BIUCR_WWSC_3)
#else
#define SPC5_FLASH_WS       (BIUCR_APC_4 | BIUCR_RWSC_4 | BIUCR_WWSC_3)
#endif

/*===========================================================================*/
/* Driver data structures and types.                                         */
/*===========================================================================*/

/*===========================================================================*/
/* Driver macros.                                                            */
/*===========================================================================*/

/*===========================================================================*/
/* External declarations.                                                    */
/*===========================================================================*/

#include "spc5_edma.h"

#ifdef __cplusplus
extern "C" {
#endif
  void hal_lld_init(void);
  void spc_clock_init(void);
#ifdef __cplusplus
}
#endif

#endif /* _HAL_LLD_H_ */

/** @} */