tinySA/os/hal/platforms/SPC5xx/EQADC_v1/adc_lld.h

/*
 * Licensed under ST Liberty SW License Agreement V2, (the "License");
 * You may not use this file except in compliance with the License.
 * You may obtain a copy of the License at:
 *
 *        http://www.st.com/software_license_agreement_liberty_v2
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

/**
 * @file    SPC5xx/EQADC_v1/adc_lld.c
 * @brief   SPC5xx low level ADC driver header.
 *
 * @addtogroup ADC
 * @{
 */

#ifndef _ADC_LLD_H_
#define _ADC_LLD_H_

#if HAL_USE_ADC || defined(__DOXYGEN__)

/*===========================================================================*/
/* Driver constants.                                                         */
/*===========================================================================*/

/**
 * @name    Internal registers indexes
 * @{
 */
#define ADC_REG_CR                  0x1
#define ADC_REG_TSCR                0x2
#define ADC_REG_TBCR                0x3
#define ADC_REG_GCCR                0x4
#define ADC_REG_OCCR                0x5
#define ADC_REG_AC1GCCR             0x31
#define ADC_REG_AC1OCCR             0x32
#define ADC_REG_AC2GCCR             0x35
#define ADC_REG_AC2OCCR             0x36
#define ADC_REG_AC1CR               0x30
#define ADC_REG_AC2CR               0x34
#define ADC_REG_AC3CR               0x38
#define ADC_REG_AC4CR               0x3C
#define ADC_REG_AC5CR               0x40
#define ADC_REG_AC6CR               0x44
#define ADC_REG_AC7CR               0x48
#define ADC_REG_AC8CR               0x4C
#define ADC_REG_PUDCR(n)            (0x70 + (n))
#define ADC_REG_PUDCR0              0x70UL
#define ADC_REG_PUDCR1              0x71UL
#define ADC_REG_PUDCR2              0x72UL
#define ADC_REG_PUDCR3              0x73UL
#define ADC_REG_PUDCR4              0x74UL
#define ADC_REG_PUDCR5              0x75UL
#define ADC_REG_PUDCR6              0x76UL
#define ADC_REG_PUDCR7              0x77UL
/** @} */

/**
 * @name    EQADC IDCR registers definitions
 * @{
 */
#define EQADC_IDCR_NCIE             (1U << 15)
#define EQADC_IDCR_TORIE            (1U << 14)
#define EQADC_IDCR_PIE              (1U << 13)
#define EQADC_IDCR_EOQIE            (1U << 12)
#define EQADC_IDCR_CFUIE            (1U << 11)
#define EQADC_IDCR_CFFE             (1U << 9)
#define EQADC_IDCR_CFFS             (1U << 8)
#define EQADC_IDCR_RFOIE            (1U << 3)
#define EQADC_IDCR_RFDE             (1U << 1)
#define EQADC_IDCR_RFDS             (1U << 0)
/** @} */

/**
 * @name    EQADC CFCR registers definitions
 * @{
 */
#define EQADC_CFCR_CFEEE0           (1U << 12)
#define EQADC_CFCR_STRME0           (1U << 11)
#define EQADC_CFCR_SSE              (1U << 10)
#define EQADC_CFCR_CFINV            (1U << 9)
#define EQADC_CFCR_MODE_MASK        (15U << 4)
#define EQADC_CFCR_MODE(n)          ((n) << 4)
#define EQADC_CFCR_MODE_DISABLED    EQADC_CFCR_MODE(0)
#define EQADC_CFCR_MODE_SWSS        EQADC_CFCR_MODE(1)
#define EQADC_CFCR_MODE_HWSS_LL     EQADC_CFCR_MODE(2)
#define EQADC_CFCR_MODE_HWSS_HL     EQADC_CFCR_MODE(3)
#define EQADC_CFCR_MODE_HWSS_FE     EQADC_CFCR_MODE(4)
#define EQADC_CFCR_MODE_HWSS_RE     EQADC_CFCR_MODE(5)
#define EQADC_CFCR_MODE_HWSS_BE     EQADC_CFCR_MODE(6)
#define EQADC_CFCR_MODE_SWCS        EQADC_CFCR_MODE(9)
#define EQADC_CFCR_MODE_HWCS_LL     EQADC_CFCR_MODE(10)
#define EQADC_CFCR_MODE_HWCS_HL     EQADC_CFCR_MODE(11)
#define EQADC_CFCR_MODE_HWCS_FE     EQADC_CFCR_MODE(12)
#define EQADC_CFCR_MODE_HWCS_RE     EQADC_CFCR_MODE(13)
#define EQADC_CFCR_MODE_HWCS_BE     EQADC_CFCR_MODE(14)
#define EQADC_CFCR_AMODE0_MASK      (15U << 0)
#define EQADC_CFCR_AMODE0(n)        ((n) << 0)
/** @} */

/**
 * @name    EQADC FISR registers definitions
 * @{
 */
#define EQADC_FISR_POPNXTPTR_MASK   (15U << 0)
#define EQADC_FISR_RFCTR_MASK       (15U << 4)
#define EQADC_FISR_TNXTPTR_MASK     (15U << 8)
#define EQADC_FISR_CFCTR_MASK       (15U << 12)
#define EQADC_FISR_RFDF             (1U << 17)
#define EQADC_FISR_RFOF             (1U << 19)
#define EQADC_FISR_CFFF             (1U << 25)
#define EQADC_FISR_SSS              (1U << 26)
#define EQADC_FISR_CFUF             (1U << 27)
#define EQADC_FISR_EOQF             (1U << 28)
#define EQADC_FISR_PF               (1U << 29)
#define EQADC_FISR_TORF             (1U << 30)
#define EQADC_FISR_NCF              (1U << 31)
#define EQADC_FISR_CLEAR_MASK       (EQADC_FISR_NCF  | EQADC_FISR_TORF |    \
                                     EQADC_FISR_PF   | EQADC_FISR_EOQF |    \
                                     EQADC_FISR_CFUF | EQADC_FISR_RFOF |    \
                                     EQADC_FISR_RFDF)
/** @} */

/**
 * @name    EQADC conversion/configuration commands
 * @{
 */
#define EQADC_CONV_CONFIG_SEL1  (8U << 0)   /**< @brief Alt.config.1.       */
#define EQADC_CONV_CONFIG_SEL2  (9U << 0)   /**< @brief Alt.config.2.       */
#define EQADC_CONV_CONFIG_SEL3  (10U << 0)  /**< @brief Alt.config.3.       */
#define EQADC_CONV_CONFIG_SEL4  (11U << 0)  /**< @brief Alt.config.4.       */
#define EQADC_CONV_CONFIG_SEL5  (12U << 0)  /**< @brief Alt.config.5.       */
#define EQADC_CONV_CONFIG_SEL6  (13U << 0)  /**< @brief Alt.config.6.       */
#define EQADC_CONV_CONFIG_SEL7  (14U << 0)  /**< @brief Alt.config.7.       */
#define EQADC_CONV_CONFIG_SEL8  (15U << 0)  /**< @brief Alt.config.8.       */
#define EQADC_CONV_CHANNEL_MASK (255U << 8) /**< @brief Channel number mask.*/
#define EQADC_CONV_CHANNEL(n)   ((n) << 8)  /**< @brief Channel number.     */
#define EQADC_CONV_FMT_RJU      (0U << 16)  /**< @brief Unsigned samples.   */
#define EQADC_CONV_FMT_RJS      (1U << 16)  /**< @brief Signed samples.     */
#define EQADC_CONV_TSR          (1U << 17)  /**< @brief Time stamp request. */
#define EQADC_CONV_LST_MASK     (3U << 18)  /**< @brief Sample time.        */
#define EQADC_CONV_LST_2        (0U << 18)  /**< @brief 2 clock cycles.     */
#define EQADC_CONV_LST_8        (1U << 18)  /**< @brief 8 clock cycles.     */
#define EQADC_CONV_LST_64       (2U << 18)  /**< @brief 64 clock cycles.    */
#define EQADC_CONV_LST_128      (3U << 18)  /**< @brief 128 clock cycles.   */
#define EQADC_CONV_MSG_MASK     (15U << 20) /**< @brief Message mask.       */
#define EQADC_CONV_MSG_RFIFO(n) ((n) << 20) /**< @brief Result in RFIFO0..5.*/
#define EQADC_CONV_MSG_NULL     (6U << 20)  /**< @brief Null message.       */
#define EQADC_CONV_CAL          (1U << 24)  /**< @brief Calibrated result.  */
#define EQADC_CONV_BN_MASK      (1U << 25)  /**< @brief Buffer number mask. */
#define EQADC_CONV_BN_ADC0      (0U << 25)  /**< @brief ADC0 selection.     */
#define EQADC_CONV_BN_ADC1      (1U << 25)  /**< @brief ADC1 selection.     */
#define EQADC_CONV_REP          (1U << 29)  /**< @brief Repeat loop flag.   */
#define EQADC_CONV_PAUSE        (1U << 30)  /**< @brief Pause flag.         */
#define EQADC_CONV_EOQ          (1U << 31)  /**< @brief End of queue flag.  */
/** @} */

/**
 * @name    EQADC read/write commands
 * @{
 */
#define EQADC_RW_REG_ADDR_MASK  (255U << 0)
#define EQADC_RW_REG_ADDR(n)    ((n) << 0)
#define EQADC_RW_VALUE_MASK     (0xFFFF << 8)
#define EQADC_RW_VALUE(n)       ((n) << 8)
#define EQADC_RW_WRITE          (0U << 24)
#define EQADC_RW_READ           (1U << 24)
#define EQADC_RW_BN_ADC0        (0U << 25)
#define EQADC_RW_BN_ADC1        (1U << 25)
#define EQADC_RW_REP            (1U << 29)
#define EQADC_RW_PAUSE          (1U << 30)
#define EQADC_RW_EOQ            (1U << 31)
/** @} */

/**
 * @name    ADC CR register definitions
 * @{
 */
#define ADC_CR_CLK_PS_MASK      (31U << 0)
#define ADC_CR_CLK_PS(n)        ((((n) >> 1) - 1) | ((n) & 1 ? ADC_CR_ODD_PS\
                                                             : 0))
#define ADC_CR_CLK_SEL          (1U << 5)
#define ADC_CR_CLK_DTY          (1U << 6)
#define ADC_CR_ODD_PS           (1U << 7)
#define ADC_CR_TBSEL_MASK       (3U << 8)
#define ADC_CR_TBSEL(n)         ((n) << 8)
#define ADC_CR_EMUX             (1U << 11)
#define ADC_CR_EN               (1U << 15)
/** @} */

/**
 * @name    ADC AxCR registers definitions
 * @{
 */
#define ADC_ACR_PRE_GAIN_MASK   (3U << 0)
#define ADC_ACR_PRE_GAIN_X1     (0U << 0)
#define ADC_ACR_PRE_GAIN_X2     (1U << 0)
#define ADC_ACR_PRE_GAIN_X4     (2U << 0)
#define ADC_ACR_RESSEL_MASK     (3U << 6)
#define ADC_ACR_RESSEL_12BITS   (0U << 6)
#define ADC_ACR_RESSEL_10BITS   (1U << 6)
#define ADC_ACR_RESSEL_8BITS    (2U << 6)
/** @} */

/*===========================================================================*/
/* Driver pre-compile time settings.                                         */
/*===========================================================================*/

/**
 * @name    Configuration options
 * @{
 */
/**
 * @brief   ADCD1 driver enable switch.
 * @details If set to @p TRUE the support for ADC0 queue 0 is included.
 * @note    The default is @p FALSE.
 */
#if !defined(SPC5_ADC_USE_ADC0_Q0) || defined(__DOXYGEN__)
#define SPC5_ADC_USE_ADC0_Q0                FALSE
#endif

/**
 * @brief   ADCD2 driver enable switch.
 * @details If set to @p TRUE the support for ADC0 queue 1 is included.
 * @note    The default is @p FALSE.
 */
#if !defined(SPC5_ADC_USE_ADC0_Q1) || defined(__DOXYGEN__)
#define SPC5_ADC_USE_ADC0_Q1                FALSE
#endif

/**
 * @brief   ADCD3 driver enable switch.
 * @details If set to @p TRUE the support for ADC0 queue 2 is included.
 * @note    The default is @p FALSE.
 */
#if !defined(SPC5_ADC_USE_ADC0_Q2) || defined(__DOXYGEN__)
#define SPC5_ADC_USE_ADC0_Q2                FALSE
#endif

/**
 * @brief   ADCD4 driver enable switch.
 * @details If set to @p TRUE the support for ADC1 queue 3 is included.
 * @note    The default is @p FALSE.
 */
#if !defined(SPC5_ADC_USE_ADC1_Q3) || defined(__DOXYGEN__)
#define SPC5_ADC_USE_ADC1_Q3                FALSE
#endif

/**
 * @brief   ADCD5 driver enable switch.
 * @details If set to @p TRUE the support for ADC1 queue 4 is included.
 * @note    The default is @p FALSE.
 */
#if !defined(SPC5_ADC_USE_ADC1_Q4) || defined(__DOXYGEN__)
#define SPC5_ADC_USE_ADC1_Q4                FALSE
#endif

/**
 * @brief   ADCD6 driver enable switch.
 * @details If set to @p TRUE the support for ADC1 queue 5 is included.
 * @note    The default is @p FALSE.
 */
#if !defined(SPC5_ADC_USE_ADC1_Q5) || defined(__DOXYGEN__)
#define SPC5_ADC_USE_ADC1_Q5                FALSE
#endif

/**
 * @brief   EQADC CFIFO0 and RFIFO0 DMA priority.
 */
#if !defined(SPC5_ADC_FIFO0_DMA_PRIO) || defined(__DOXYGEN__)
#define SPC5_ADC_FIFO0_DMA_PRIO             12
#endif

/**
 * @brief   EQADC CFIFO1 and RFIFO1 DMA priority.
 */
#if !defined(SPC5_ADC_FIFO1_DMA_PRIO) || defined(__DOXYGEN__)
#define SPC5_ADC_FIFO1_DMA_PRIO             12
#endif

/**
 * @brief   EQADC CFIFO2 and RFIFO2 DMA priority.
 */
#if !defined(SPC5_ADC_FIFO2_DMA_PRIO) || defined(__DOXYGEN__)
#define SPC5_ADC_FIFO2_DMA_PRIO             12
#endif

/**
 * @brief   EQADC CFIFO3 and RFIFO3 DMA priority.
 */
#if !defined(SPC5_ADC_FIFO3_DMA_PRIO) || defined(__DOXYGEN__)
#define SPC5_ADC_FIFO3_DMA_PRIO             12
#endif

/**
 * @brief   EQADC CFIFO4 and RFIFO4 DMA priority.
 */
#if !defined(SPC5_ADC_FIFO4_DMA_PRIO) || defined(__DOXYGEN__)
#define SPC5_ADC_FIFO4_DMA_PRIO             12
#endif

/**
 * @brief   EQADC CFIFO5 and RFIFO5 DMA priority.
 */
#if !defined(SPC5_ADC_FIFO5_DMA_PRIO) || defined(__DOXYGEN__)
#define SPC5_ADC_FIFO5_DMA_PRIO             12
#endif

/**
 * @brief   EQADC CFIFO0 and RFIFO0 DMA IRQ priority.
 */
#if !defined(SPC5_ADC0_FIFO0_DMA_IRQ_PRIO) || defined(__DOXYGEN__)
#define SPC5_ADC_FIFO0_DMA_IRQ_PRIO         12
#endif

/**
 * @brief   EQADC CFIFO1 and RFIFO1 DMA IRQ priority.
 */
#if !defined(SPC5_ADC0_FIFO1_DMA_IRQ_PRIO) || defined(__DOXYGEN__)
#define SPC5_ADC_FIFO1_DMA_IRQ_PRIO         12
#endif

/**
 * @brief   EQADC CFIFO2 and RFIFO2 DMA IRQ priority.
 */
#if !defined(SPC5_ADC0_FIFO2_DMA_IRQ_PRIO) || defined(__DOXYGEN__)
#define SPC5_ADC_FIFO2_DMA_IRQ_PRIO         12
#endif

/**
 * @brief   EQADC CFIFO3 and RFIFO3 DMA IRQ priority.
 */
#if !defined(SPC5_ADC0_FIFO3_DMA_IRQ_PRIO) || defined(__DOXYGEN__)
#define SPC5_ADC_FIFO3_DMA_IRQ_PRIO         12
#endif

/**
 * @brief   EQADC CFIFO4 and RFIFO4 DMA IRQ priority.
 */
#if !defined(SPC5_ADC0_FIFO4_DMA_IRQ_PRIO) || defined(__DOXYGEN__)
#define SPC5_ADC_FIFO4_DMA_IRQ_PRIO         12
#endif

/**
 * @brief   EQADC CFIFO5 and RFIFO5 DMA IRQ priority.
 */
#if !defined(SPC5_ADC0_FIFO5_DMA_IRQ_PRIO) || defined(__DOXYGEN__)
#define SPC5_ADC_FIFO5_DMA_IRQ_PRIO         12
#endif

/**
 * @brief   EQADC clock prescaler value.
 */
#if !defined(SPC5_ADC_CR_CLK_PS) || defined(__DOXYGEN__)
#define SPC5_ADC_CR_CLK_PS                  ADC_CR_CLK_PS(5)
#endif

/**
 * @brief   Initialization value for PUDCRx registers.
 */
#if !defined(SPC5_ADC_PUDCR) || defined(__DOXYGEN__)
#define SPC5_ADC_PUDCR                     {0, 0, 0, 0, 0, 0, 0, 0}
#endif
/** @} */

/*===========================================================================*/
/* Derived constants and error checks.                                       */
/*===========================================================================*/

#if !SPC5_HAS_EQADC
#error "EQADC not present in the selected device"
#endif

#define SPC5_ADC_USE_ADC0                   (SPC5_ADC_USE_ADC0_Q0 |         \
                                             SPC5_ADC_USE_ADC0_Q1 |         \
                                             SPC5_ADC_USE_ADC0_Q2)
#define SPC5_ADC_USE_ADC1                   (SPC5_ADC_USE_ADC1_Q3 |         \
                                             SPC5_ADC_USE_ADC1_Q4 |         \
                                             SPC5_ADC_USE_ADC1_Q5)

#if !SPC5_ADC_USE_ADC0 && !SPC5_ADC_USE_ADC1
#error "ADC driver activated but no ADC peripheral assigned"
#endif

/*===========================================================================*/
/* Driver data structures and types.                                         */
/*===========================================================================*/

/*!
 * @brief   FIFO unit numeric IDs.
 */
typedef enum {
  ADC_FIFO_0 = 0,
  ADC_FIFO_1 = 1,
  ADC_FIFO_2 = 2,
  ADC_FIFO_3 = 3,
  ADC_FIFO_4 = 4,
  ADC_FIFO_5 = 5
} adcfifo_t;

/**
 * @brief   ADC command data type.
 */
typedef uint32_t adccommand_t;

/**
 * @brief   ADC sample data type.
 */
typedef uint16_t adcsample_t;

/**
 * @brief   Channels number in a conversion group.
 */
typedef uint16_t adc_channels_num_t;

/**
 * @brief   Possible ADC failure causes.
 * @note    Error codes are architecture dependent and should not relied
 *          upon.
 */
typedef enum {
  ADC_ERR_DMAFAILURE = 0                    /**< DMA operations failure.    */
} adcerror_t;

/**
 * @brief   Type of a structure representing an ADC driver.
 */
typedef struct ADCDriver ADCDriver;

/**
 * @brief   ADC notification callback type.
 *
 * @param[in] adcp      pointer to the @p ADCDriver object triggering the
 *                      callback
 * @param[in] buffer    pointer to the most recent samples data
 * @param[in] n         number of buffer rows available starting from @p buffer
 */
typedef void (*adccallback_t)(ADCDriver *adcp, adcsample_t *buffer, size_t n);

/**
 * @brief   ADC error callback type.
 *
 * @param[in] adcp      pointer to the @p ADCDriver object triggering the
 *                      callback
 * @param[in] err       ADC error code
 */
typedef void (*adcerrorcallback_t)(ADCDriver *adcp, adcerror_t err);

/**
 * @brief   Conversion group configuration structure.
 * @details This implementation-dependent structure describes a conversion
 *          operation.
 * @note    Implementations may extend this structure to contain more,
 *          architecture dependent, fields.
 */
typedef struct {
  /**
   * @brief   Enables the circular buffer mode for the group.
   */
  bool_t                    circular;
  /**
   * @brief   Number of the analog channels belonging to the conversion group.
   */
  adc_channels_num_t        num_channels;
  /**
   * @brief   Callback function associated to the group or @p NULL.
   */
  adccallback_t             end_cb;
  /**
   * @brief   Error callback or @p NULL.
   */
  adcerrorcallback_t        error_cb;
  /* End of the mandatory fields.*/
  /**
   * @brief   Number of command iterations stored in @p commands.
   * @note    The total number of array elements must be @p num_channels *
   *          @p num_iterations.
   * @note    This fields is the upper limit of the parameter @p n that can
   *          be passed to the functions @p adcConvert() and
   *          @p adcStartConversion().
   */
  uint32_t                  num_iterations;
  /**
   * @brief   Initialization value for CFCR register.
   */
  uint16_t                  cfcr;
  /**
   * @brief   Pointer to an array of low level EQADC commands to be pushed
   *          into the CFIFO during a conversion.
   */
  const adccommand_t        *commands;
} ADCConversionGroup;

/**
 * @brief   Driver configuration structure.
 * @note    It could be empty on some architectures.
 */
typedef struct {
  /**
   * @brief   ETISR register value for the session.
   */
  uint32_t                  etisr;
  /**
   * @brief   ISEL3 register value for the session.
   */
  uint32_t                  isel3;
} ADCConfig;

/**
 * @brief   Structure representing an ADC driver.
 */
struct ADCDriver {
  /**
   * @brief   Driver state.
   */
  adcstate_t                state;
  /**
   * @brief   Current configuration data.
   */
  const ADCConfig           *config;
  /**
   * @brief   Current samples buffer pointer or @p NULL.
   */
  adcsample_t               *samples;
  /**
   * @brief   Current samples buffer depth or @p 0.
   */
  size_t                    depth;
  /**
   * @brief   Current conversion group pointer or @p NULL.
   */
  const ADCConversionGroup  *grpp;
#if ADC_USE_WAIT || defined(__DOXYGEN__)
  /**
   * @brief   Waiting thread.
   */
  Thread                    *thread;
#endif
#if ADC_USE_MUTUAL_EXCLUSION || defined(__DOXYGEN__)
#if CH_USE_MUTEXES || defined(__DOXYGEN__)
  /**
   * @brief   Mutex protecting the peripheral.
   */
  Mutex                     mutex;
#elif CH_USE_SEMAPHORES
  Semaphore                 semaphore;
#endif
#endif /* ADC_USE_MUTUAL_EXCLUSION */
#if defined(ADC_DRIVER_EXT_FIELDS)
  ADC_DRIVER_EXT_FIELDS
#endif
  /* End of the mandatory fields.*/
  /**
   * @brief   CFIFO/RFIFO used by this instance.
   */
  adcfifo_t                 fifo;
  /**
   * @brief   EDMA channel used for the CFIFO.
   */
  edma_channel_t            cfifo_channel;
  /**
   * @brief   EDMA channel used for the RFIFO.
   */
  edma_channel_t            rfifo_channel;
};

/*===========================================================================*/
/* Driver macros.                                                            */
/*===========================================================================*/

/*===========================================================================*/
/* External declarations.                                                    */
/*===========================================================================*/

#if SPC5_ADC_USE_ADC0_Q0 && !defined(__DOXYGEN__)
extern ADCDriver ADCD1;
#endif

#if SPC5_ADC_USE_ADC0_Q1 && !defined(__DOXYGEN__)
extern ADCDriver ADCD2;
#endif

#if SPC5_ADC_USE_ADC0_Q2 && !defined(__DOXYGEN__)
extern ADCDriver ADCD3;
#endif

#if SPC5_ADC_USE_ADC1_Q3 && !defined(__DOXYGEN__)
extern ADCDriver ADCD4;
#endif

#if SPC5_ADC_USE_ADC1_Q4 && !defined(__DOXYGEN__)
extern ADCDriver ADCD5;
#endif

#if SPC5_ADC_USE_ADC1_Q5 && !defined(__DOXYGEN__)
extern ADCDriver ADCD6;
#endif

#ifdef __cplusplus
extern "C" {
#endif
  void adc_lld_init(void);
  void adc_lld_start(ADCDriver *adcp);
  void adc_lld_stop(ADCDriver *adcp);
  void adc_lld_start_conversion(ADCDriver *adcp);
  void adc_lld_stop_conversion(ADCDriver *adcp);
#ifdef __cplusplus
}
#endif

#endif /* HAL_USE_ADC */

#endif /* _ADC_LLD_H_ */

/** @} */