tinySA/os/hal/platforms/STM32/USBv1/usb_lld.c

/*
    ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
                 2011,2012 Giovanni Di Sirio.

    This file is part of ChibiOS/RT.

    ChibiOS/RT is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 3 of the License, or
    (at your option) any later version.

    ChibiOS/RT is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program.  If not, see <http://www.gnu.org/licenses/>.
*/

/**
 * @file    STM32/USBv1/usb_lld.c
 * @brief   STM32 USB subsystem low level driver source.
 *
 * @addtogroup USB
 * @{
 */

#include <string.h>

#include "ch.h"
#include "hal.h"

#if HAL_USE_USB || defined(__DOXYGEN__)

#define BTABLE_ADDR     0x0000

/*===========================================================================*/
/* Driver exported variables.                                                */
/*===========================================================================*/

/** @brief USB1 driver identifier.*/
#if STM32_USB_USE_USB1 || defined(__DOXYGEN__)
USBDriver USBD1;
#endif

/*===========================================================================*/
/* Driver local variables.                                                   */
/*===========================================================================*/

/**
 * @brief   EP0 state.
 * @note    It is an union because IN and OUT endpoints are never used at the
 *          same time for EP0.
 */
static union {
  /**
   * @brief   IN EP0 state.
   */
  USBInEndpointState in;
  /**
   * @brief   OUT EP0 state.
   */
  USBOutEndpointState out;
} ep0_state;

/**
 * @brief   Buffer for the EP0 setup packets.
 */
static uint8_t ep0setup_buffer[8];

/**
 * @brief   EP0 initialization structure.
 */
static const USBEndpointConfig ep0config = {
  USB_EP_MODE_TYPE_CTRL,
  _usb_ep0setup,
  _usb_ep0in,
  _usb_ep0out,
  0x40,
  0x40,
  &ep0_state.in,
  &ep0_state.out,
  ep0setup_buffer
};

/*===========================================================================*/
/* Driver local functions.                                                   */
/*===========================================================================*/

/**
 * @brief   Resets the packet memory allocator.
 *
 * @param[in] usbp      pointer to the @p USBDriver object
 */
static void pm_reset(USBDriver *usbp) {

  /* The first 64 bytes are reserved for the descriptors table. The effective
     available RAM for endpoint buffers is just 448 bytes.*/
  usbp->pmnext = 64;
}

/**
 * @brief   Resets the packet memory allocator.
 *
 * @param[in] usbp      pointer to the @p USBDriver object
 * @param[in] size      size of the packet buffer to allocate
 */
static uint32_t pm_alloc(USBDriver *usbp, size_t size) {
  uint32_t next;

  next = usbp->pmnext;
  usbp->pmnext += size;
  chDbgAssert(usbp->pmnext <= USB_PMA_SIZE, "pm_alloc(), #1", "PMA overflow");
  return next;
}

/**
 * @brief   Reads from a dedicated packet buffer.
 *
 * @param[in] usbp      pointer to the @p USBDriver object
 * @param[in] ep        endpoint number
 * @param[out] buf      buffer where to copy the packet data
 * @param[in] n         maximum number of bytes to copy. This value must
 *                      not exceed the maximum packet size for this endpoint.
 * @return              The received packet size regardless the specified
 *                      @p n parameter.
 * @retval 0            Zero size packet received.
 *
 * @notapi
 */
static size_t usb_read_packet_buffer(USBDriver *usbp, usbep_t ep,
                                     uint8_t *buf, size_t n) {
  uint32_t *pmap;
  stm32_usb_descriptor_t *udp;
  size_t count;

  (void)usbp;
  udp = USB_GET_DESCRIPTOR(ep);
  pmap = USB_ADDR2PTR(udp->RXADDR0);
  count = (size_t)udp->RXCOUNT0 & RXCOUNT_COUNT_MASK;
  if (n > count)
    n = count;
  n = (n + 1) / 2;
  while (n > 0) {
    *(uint16_t *)buf = (uint16_t)*pmap++;
    buf += 2;
    n--;
  }
  return count;
}

/**
 * @brief   Writes to a dedicated packet buffer.
 *
 * @param[in] usbp      pointer to the @p USBDriver object
 * @param[in] ep        endpoint number
 * @param[in] buf       buffer where to fetch the packet data
 * @param[in] n         maximum number of bytes to copy. This value must
 *                      not exceed the maximum packet size for this endpoint.
 *
 * @notapi
 */
static void usb_write_packet_buffer(USBDriver *usbp, usbep_t ep,
                                    const uint8_t *buf, size_t n) {
  uint32_t *pmap;
  stm32_usb_descriptor_t *udp;

  (void)usbp;
  udp = USB_GET_DESCRIPTOR(ep);
  pmap = USB_ADDR2PTR(udp->TXADDR0);
  udp->TXCOUNT0 = (uint16_t)n;
  n = (n + 1) / 2;
  while (n > 0) {
    *pmap++ = *(uint16_t *)buf;
    buf += 2;
    n--;
  }
}

/**
 * @brief   Prepares for a receive transaction on an OUT endpoint.
 * @post    The endpoint is ready for @p usbStartReceiveI().
 *
 * @param[in] usbp      pointer to the @p USBDriver object
 * @param[in] ep        endpoint number
 * @param[in] n         maximum number of bytes to copy
 *
 * @special
 */
static void usb_prepare_receive(USBDriver *usbp, usbep_t ep, size_t n) {
  USBOutEndpointState *osp = usbp->epc[ep]->out_state;

  osp->rxsize = n;
  osp->rxcnt  = 0;

  /* Transfer initialization.*/
  if (osp->rxsize == 0)         /* Special case for zero sized packets.*/
    osp->rxpkts = 1;
  else
    osp->rxpkts = (uint16_t)((n + usbp->epc[ep]->out_maxsize - 1) /
                             usbp->epc[ep]->out_maxsize);
}

/**
 * @brief   Prepares for a transmit transaction on an IN endpoint.
 * @post    The endpoint is ready for @p usbStartTransmitI().
 * @note    The transmit transaction size is equal to the data contained
 *          in the queue.
 *
 * @param[in] usbp      pointer to the @p USBDriver object
 * @param[in] ep        endpoint number
 * @param[in] n         maximum number of bytes to copy
 *
 * @special
 */
static void usb_prepare_transmit(USBDriver *usbp, usbep_t ep, size_t n) {
  USBInEndpointState *isp = usbp->epc[ep]->in_state;

  isp->txsize = n;
  isp->txcnt  = 0;

  /* Transfer initialization.*/
  if (n > (size_t)usbp->epc[ep]->in_maxsize)
    n = (size_t)usbp->epc[ep]->in_maxsize;
  usb_write_packet_buffer(usbp, ep, isp->mode.linear.txbuf, n);
}

/*===========================================================================*/
/* Driver interrupt handlers.                                                */
/*===========================================================================*/

#if STM32_USB_USE_USB1 || defined(__DOXYGEN__)
/**
 * @brief   USB high priority interrupt handler.
 *
 * @isr
 */
CH_IRQ_HANDLER(Vector8C) {

  CH_IRQ_PROLOGUE();

  CH_IRQ_EPILOGUE();
}

/**
 * @brief   USB low priority interrupt handler.
 *
 * @isr
 */
CH_IRQ_HANDLER(Vector90) {
  uint32_t istr;
  size_t n;
  USBDriver *usbp = &USBD1;

  CH_IRQ_PROLOGUE();

  istr = STM32_USB->ISTR;

  /* USB bus reset condition handling.*/
  if (istr & ISTR_RESET) {
    _usb_reset(usbp);
    _usb_isr_invoke_event_cb(usbp, USB_EVENT_RESET);
    STM32_USB->ISTR = ~ISTR_RESET;
  }

  /* USB bus SUSPEND condition handling.*/
  if (istr & ISTR_SUSP) {
    STM32_USB->CNTR |= CNTR_FSUSP;
    _usb_isr_invoke_event_cb(usbp, USB_EVENT_SUSPEND);
#if STM32_USB_LOW_POWER_ON_SUSPEND
    STM32_USB->CNTR |= CNTR_LP_MODE;
#endif
    STM32_USB->ISTR = ~ISTR_SUSP;
  }

  /* USB bus WAKEUP condition handling.*/
  if (istr & ISTR_WKUP) {
    uint32_t fnr = STM32_USB->FNR;
    if (!(fnr & FNR_RXDP)) {
      STM32_USB->CNTR &= ~CNTR_FSUSP;
      _usb_isr_invoke_event_cb(usbp, USB_EVENT_WAKEUP);
    }
#if STM32_USB_LOW_POWER_ON_SUSPEND
    else {
      /* Just noise, going back in SUSPEND mode, reference manual 22.4.5,
         table 169.*/
      STM32_USB->CNTR |= CNTR_LP_MODE;
    }
#endif
    STM32_USB->ISTR = ~ISTR_WKUP;
  }

  /* SOF handling.*/
  if (istr & ISTR_SOF) {
    _usb_isr_invoke_sof_cb(usbp);
    STM32_USB->ISTR = ~ISTR_SOF;
  }

  /* Endpoint events handling.*/
  while (istr & ISTR_CTR) {
    uint32_t ep;
    uint32_t epr = STM32_USB->EPR[ep = istr & ISTR_EP_ID_MASK];
    const USBEndpointConfig *epcp = usbp->epc[ep];

    if (epr & EPR_CTR_TX) {
      /* IN endpoint, transmission.*/
      EPR_CLEAR_CTR_TX(ep);

      n = (size_t)USB_GET_DESCRIPTOR(ep)->TXCOUNT0;
      epcp->in_state->mode.linear.txbuf  += n;
      epcp->in_state->txcnt              += n;
      epcp->in_state->txsize             -= n;
      if (epcp->in_state->txsize > 0) {
        /* Transfer not completed, there are more packets to send.*/
        if (epcp->in_state->txsize > epcp->in_maxsize)
          n = epcp->in_maxsize;
        else
          n = epcp->in_state->txsize;
        usb_write_packet_buffer(usbp, ep,
                                epcp->in_state->mode.linear.txbuf, n);
        usb_lld_start_in(usbp, ep);
      }
      else {
        /* Transfer completed, invokes the callback.*/
        _usb_isr_invoke_in_cb(usbp, ep);
      }
    }
    if (epr & EPR_CTR_RX) {
      EPR_CLEAR_CTR_RX(ep);
      /* OUT endpoint, receive.*/
      if (epr & EPR_SETUP) {
        /* Setup packets handling, setup packets are handled using a
           specific callback.*/
        _usb_isr_invoke_setup_cb(usbp, ep);
      }
      else {
        n = usb_read_packet_buffer(usbp, ep,
                                       epcp->out_state->mode.linear.rxbuf,
                                       epcp->out_state->rxsize);
        usb_lld_start_out(usbp, ep);
        epcp->out_state->mode.linear.rxbuf  += n;
        epcp->out_state->rxcnt              += n;
        epcp->out_state->rxsize             -= n;
        epcp->out_state->rxpkts             -= 1;
        if (epcp->out_state->rxpkts > 0) {
          /* Transfer not completed, there are more packets to receive.*/
          EPR_SET_STAT_RX(ep, EPR_STAT_RX_VALID);
        }
        else {
          /* Transfer completed, invokes the callback.*/
          _usb_isr_invoke_out_cb(usbp, ep);
        }
      }
    }
    istr = STM32_USB->ISTR;
  }

  CH_IRQ_EPILOGUE();
}
#endif

/*===========================================================================*/
/* Driver exported functions.                                                */
/*===========================================================================*/

/**
 * @brief   Low level USB driver initialization.
 *
 * @notapi
 */
void usb_lld_init(void) {

  /* Driver initialization.*/
  usbObjectInit(&USBD1);
}

/**
 * @brief   Configures and activates the USB peripheral.
 *
 * @param[in] usbp      pointer to the @p USBDriver object
 *
 * @notapi
 */
void usb_lld_start(USBDriver *usbp) {

  if (usbp->state == USB_STOP) {
    /* Clock activation.*/
#if STM32_USB_USE_USB1
    if (&USBD1 == usbp) {
      /* USB clock enabled.*/
      rccEnableUSB(FALSE);
      /* Powers up the transceiver while holding the USB in reset state.*/
      STM32_USB->CNTR = CNTR_FRES;
      /* Enabling the USB IRQ vectors, this also gives enough time to allow
         the transceiver power up (1uS).*/
      nvicEnableVector(19,
                       CORTEX_PRIORITY_MASK(STM32_USB_USB1_HP_IRQ_PRIORITY));
      nvicEnableVector(20,
                       CORTEX_PRIORITY_MASK(STM32_USB_USB1_LP_IRQ_PRIORITY));
      /* Releases the USB reset.*/
      STM32_USB->CNTR = 0;
    }
#endif
    /* Reset procedure enforced on driver start.*/
    _usb_reset(usbp);
  }
  /* Configuration.*/
}

/**
 * @brief   Deactivates the USB peripheral.
 *
 * @param[in] usbp      pointer to the @p USBDriver object
 *
 * @notapi
 */
void usb_lld_stop(USBDriver *usbp) {

  /* If in ready state then disables the USB clock.*/
  if (usbp->state == USB_STOP) {
#if STM32_USB_USE_USB1
    if (&USBD1 == usbp) {
      nvicDisableVector(19);
      nvicDisableVector(20);
      STM32_USB->CNTR = CNTR_PDWN | CNTR_FRES;
      rccDisableUSB(FALSE);
    }
#endif
  }
}

/**
 * @brief   USB low level reset routine.
 *
 * @param[in] usbp      pointer to the @p USBDriver object
 *
 * @notapi
 */
void usb_lld_reset(USBDriver *usbp) {
  uint32_t cntr;

  /* Post reset initialization.*/
  STM32_USB->BTABLE = 0;
  STM32_USB->ISTR   = 0;
  STM32_USB->DADDR  = DADDR_EF;
  cntr              = /*CNTR_ESOFM | */ CNTR_RESETM  | CNTR_SUSPM |
                      CNTR_WKUPM | /*CNTR_ERRM | CNTR_PMAOVRM |*/ CNTR_CTRM;
  /* The SOF interrupt is only enabled if a callback is defined for
     this service because it is an high rate source.*/
  if (usbp->config->sof_cb != NULL)
    cntr |= CNTR_SOFM;
  STM32_USB->CNTR = cntr;

  /* Resets the packet memory allocator.*/
  pm_reset(usbp);

  /* EP0 initialization.*/
  usbp->epc[0] = &ep0config;
  usb_lld_init_endpoint(usbp, 0);
}

/**
 * @brief   Sets the USB address.
 *
 * @param[in] usbp      pointer to the @p USBDriver object
 *
 * @notapi
 */
void usb_lld_set_address(USBDriver *usbp) {

  STM32_USB->DADDR = (uint32_t)(usbp->address) | DADDR_EF;
}

/**
 * @brief   Enables an endpoint.
 *
 * @param[in] usbp      pointer to the @p USBDriver object
 * @param[in] ep        endpoint number
 *
 * @notapi
 */
void usb_lld_init_endpoint(USBDriver *usbp, usbep_t ep) {
  uint16_t nblocks, epr;
  stm32_usb_descriptor_t *dp;
  const USBEndpointConfig *epcp = usbp->epc[ep];

  /* Setting the endpoint type.*/
  switch (epcp->ep_mode & USB_EP_MODE_TYPE) {
  case USB_EP_MODE_TYPE_ISOC:
    epr = EPR_EP_TYPE_ISO;
    break;
  case USB_EP_MODE_TYPE_BULK:
    epr = EPR_EP_TYPE_BULK;
    break;
  case USB_EP_MODE_TYPE_INTR:
    epr = EPR_EP_TYPE_INTERRUPT;
    break;
  default:
    epr = EPR_EP_TYPE_CONTROL;
  }

  /* IN endpoint initially in NAK mode.*/
  if (epcp->in_cb != NULL)
    epr |= EPR_STAT_TX_NAK;

  /* OUT endpoint initially in NAK mode.*/
  if (epcp->out_cb != NULL)
    epr |= EPR_STAT_RX_NAK;

  /* EPxR register setup.*/
  EPR_SET(ep, epr | ep);
  EPR_TOGGLE(ep, epr);

  /* Endpoint size and address initialization.*/
  if (epcp->out_maxsize > 62)
    nblocks = (((((epcp->out_maxsize - 1) | 0x1f) + 1) / 32) << 10) |
              0x8000;
  else
    nblocks = ((((epcp->out_maxsize - 1) | 1) + 1) / 2) << 10;
  dp = USB_GET_DESCRIPTOR(ep);
  dp->TXCOUNT0 = 0;
  dp->RXCOUNT0 = nblocks;
  dp->TXADDR0  = pm_alloc(usbp, epcp->in_maxsize);
  dp->RXADDR0  = pm_alloc(usbp, epcp->out_maxsize);
}

/**
 * @brief   Disables all the active endpoints except the endpoint zero.
 *
 * @param[in] usbp      pointer to the @p USBDriver object
 *
 * @notapi
 */
void usb_lld_disable_endpoints(USBDriver *usbp) {
  unsigned i;

  /* Resets the packet memory allocator.*/
  pm_reset(usbp);

  /* Disabling all endpoints.*/
  for (i = 1; i <= USB_ENDOPOINTS_NUMBER; i++) {
    EPR_TOGGLE(i, 0);
    EPR_SET(i, 0);
  }
}

/**
 * @brief   Returns the status of an OUT endpoint.
 *
 * @param[in] usbp      pointer to the @p USBDriver object
 * @param[in] ep        endpoint number
 * @return              The endpoint status.
 * @retval EP_STATUS_DISABLED The endpoint is not active.
 * @retval EP_STATUS_STALLED  The endpoint is stalled.
 * @retval EP_STATUS_ACTIVE   The endpoint is active.
 *
 * @notapi
 */
usbepstatus_t usb_lld_get_status_out(USBDriver *usbp, usbep_t ep) {

  (void)usbp;
  switch (STM32_USB->EPR[ep] & EPR_STAT_RX_MASK) {
  case EPR_STAT_RX_DIS:
    return EP_STATUS_DISABLED;
  case EPR_STAT_RX_STALL:
    return EP_STATUS_STALLED;
  default:
    return EP_STATUS_ACTIVE;
  }
}

/**
 * @brief   Returns the status of an IN endpoint.
 *
 * @param[in] usbp      pointer to the @p USBDriver object
 * @param[in] ep        endpoint number
 * @return              The endpoint status.
 * @retval EP_STATUS_DISABLED The endpoint is not active.
 * @retval EP_STATUS_STALLED  The endpoint is stalled.
 * @retval EP_STATUS_ACTIVE   The endpoint is active.
 *
 * @notapi
 */
usbepstatus_t usb_lld_get_status_in(USBDriver *usbp, usbep_t ep) {

  (void)usbp;
  switch (STM32_USB->EPR[ep] & EPR_STAT_TX_MASK) {
  case EPR_STAT_TX_DIS:
    return EP_STATUS_DISABLED;
  case EPR_STAT_TX_STALL:
    return EP_STATUS_STALLED;
  default:
    return EP_STATUS_ACTIVE;
  }
}

/**
 * @brief   Reads a setup packet from the dedicated packet buffer.
 * @details This function must be invoked in the context of the @p setup_cb
 *          callback in order to read the received setup packet.
 * @pre     In order to use this function the endpoint must have been
 *          initialized as a control endpoint.
 * @post    The endpoint is ready to accept another packet.
 *
 * @param[in] usbp      pointer to the @p USBDriver object
 * @param[in] ep        endpoint number
 * @param[out] buf      buffer where to copy the packet data
 *
 * @notapi
 */
void usb_lld_read_setup(USBDriver *usbp, usbep_t ep, uint8_t *buf) {
  uint32_t *pmap;
  stm32_usb_descriptor_t *udp;
  uint32_t n;

  (void)usbp;
  udp = USB_GET_DESCRIPTOR(ep);
  pmap = USB_ADDR2PTR(udp->RXADDR0);
  for (n = 0; n < 4; n++) {
    *(uint16_t *)buf = (uint16_t)*pmap++;
    buf += 2;
  }
}

/**
 * @brief   Prepares for a receive operation.
 *
 * @param[in] usbp      pointer to the @p USBDriver object
 * @param[in] ep        endpoint number
 * @param[out] buf      buffer where to copy the received data
 * @param[in] n         maximum number of bytes to copy
 *
 * @notapi
 */
void usb_lld_prepare_receive(USBDriver *usbp, usbep_t ep,
                             uint8_t *buf, size_t n) {
  USBOutEndpointState *osp = usbp->epc[ep]->out_state;

  osp->rxqueued           = FALSE;
  osp->mode.linear.rxbuf  = buf;
  usb_prepare_receive(usbp, ep, n);
}

/**
 * @brief   Prepares for a transmit operation.
 *
 * @param[in] usbp      pointer to the @p USBDriver object
 * @param[in] ep        endpoint number
 * @param[in] buf       buffer where to fetch the data to be transmitted
 * @param[in] n         maximum number of bytes to copy
 *
 * @notapi
 */
void usb_lld_prepare_transmit(USBDriver *usbp, usbep_t ep,
                              const uint8_t *buf, size_t n) {
  USBInEndpointState *isp = usbp->epc[ep]->in_state;

  isp->txqueued           = FALSE;
  isp->mode.linear.txbuf  = buf;
  usb_prepare_transmit(usbp, ep, n);
}

/**
 * @brief   Prepares for a receive transaction on an OUT endpoint.
 * @post    The endpoint is ready for @p usbStartReceiveI().
 * @note    The receive transaction size is equal to the space in the queue
 *          rounded to the lower multiple of a packet size. Make sure there
 *          is room for at least one packet in the queue before starting
 *          the receive operation.
 *
 * @param[in] usbp      pointer to the @p USBDriver object
 * @param[in] ep        endpoint number
 * @param[in] iq        input queue to be filled with incoming data
 * @param[in] n         maximum number of bytes to copy
 *
 * @special
 */
void usb_lld_prepare_queued_receive(USBDriver *usbp, usbep_t ep,
                                    InputQueue *iq, size_t n) {
  USBOutEndpointState *osp = usbp->epc[ep]->out_state;

  osp->rxqueued           = TRUE;
  osp->mode.queue.rxqueue = iq;
  usb_prepare_receive(usbp, ep, n);
}

/**
 * @brief   Prepares for a transmit transaction on an IN endpoint.
 * @post    The endpoint is ready for @p usbStartTransmitI().
 * @note    The transmit transaction size is equal to the data contained
 *          in the queue.
 *
 * @param[in] usbp      pointer to the @p USBDriver object
 * @param[in] ep        endpoint number
 * @param[in] oq        output queue to be fetched for outgoing data
 * @param[in] n         maximum number of bytes to copy
 *
 * @special
 */
void usb_lld_prepare_queued_transmit(USBDriver *usbp, usbep_t ep,
                                     OutputQueue *oq, size_t n) {
  USBInEndpointState *isp = usbp->epc[ep]->in_state;

  isp->txqueued           = TRUE;
  isp->mode.queue.txqueue = oq;
  usb_prepare_transmit(usbp, ep, n);
}

/**
 * @brief   Starts a receive operation on an OUT endpoint.
 *
 * @param[in] usbp      pointer to the @p USBDriver object
 * @param[in] ep        endpoint number
 *
 * @notapi
 */
void usb_lld_start_out(USBDriver *usbp, usbep_t ep) {

  (void)usbp;

  EPR_SET_STAT_RX(ep, EPR_STAT_RX_VALID);
}

/**
 * @brief   Starts a transmit operation on an IN endpoint.
 *
 * @param[in] usbp      pointer to the @p USBDriver object
 * @param[in] ep        endpoint number
 *
 * @notapi
 */
void usb_lld_start_in(USBDriver *usbp, usbep_t ep) {

  (void)usbp;

  EPR_SET_STAT_TX(ep, EPR_STAT_TX_VALID);
}

/**
 * @brief   Brings an OUT endpoint in the stalled state.
 *
 * @param[in] usbp      pointer to the @p USBDriver object
 * @param[in] ep        endpoint number
 *
 * @notapi
 */
void usb_lld_stall_out(USBDriver *usbp, usbep_t ep) {

  (void)usbp;

  EPR_SET_STAT_RX(ep, EPR_STAT_RX_STALL);
}

/**
 * @brief   Brings an IN endpoint in the stalled state.
 *
 * @param[in] usbp      pointer to the @p USBDriver object
 * @param[in] ep        endpoint number
 *
 * @notapi
 */
void usb_lld_stall_in(USBDriver *usbp, usbep_t ep) {

  (void)usbp;

  EPR_SET_STAT_TX(ep, EPR_STAT_TX_STALL);
}

/**
 * @brief   Brings an OUT endpoint in the active state.
 *
 * @param[in] usbp      pointer to the @p USBDriver object
 * @param[in] ep        endpoint number
 *
 * @notapi
 */
void usb_lld_clear_out(USBDriver *usbp, usbep_t ep) {

  (void)usbp;

  /* Makes sure to not put to NAK an endpoint that is already
     transferring.*/
  if ((STM32_USB->EPR[ep] & EPR_STAT_RX_MASK) != EPR_STAT_RX_VALID)
    EPR_SET_STAT_TX(ep, EPR_STAT_RX_NAK);
}

/**
 * @brief   Brings an IN endpoint in the active state.
 *
 * @param[in] usbp      pointer to the @p USBDriver object
 * @param[in] ep        endpoint number
 *
 * @notapi
 */
void usb_lld_clear_in(USBDriver *usbp, usbep_t ep) {

  (void)usbp;

  /* Makes sure to not put to NAK an endpoint that is already
     transferring.*/
  if ((STM32_USB->EPR[ep] & EPR_STAT_TX_MASK) != EPR_STAT_TX_VALID)
    EPR_SET_STAT_TX(ep, EPR_STAT_TX_NAK);
}

#endif /* HAL_USE_USB */

/** @} */