tinySA/os/hal/platforms/STM32/I2Cv2/i2c_lld.h

/*
    ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at

        http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.
*/
/*
   Concepts and parts of this file have been contributed by Uladzimir Pylinsky
   aka barthess.
 */

/**
 * @file    STM32/I2Cv2/i2c_lld.h
 * @brief   STM32 I2C subsystem low level driver header.
 *
 * @addtogroup I2C
 * @{
 */

#ifndef _I2C_LLD_H_
#define _I2C_LLD_H_

#if HAL_USE_I2C || defined(__DOXYGEN__)

/*===========================================================================*/
/* Driver constants.                                                         */
/*===========================================================================*/

/**
 * @name    TIMINGR register definitions
 * @{
 */
#define STM32_TIMINGR_PRESC_MASK        (15U << 28)
#define STM32_TIMINGR_PRESC(n)          ((n) << 28)
#define STM32_TIMINGR_SCLDEL_MASK       (15U << 20)
#define STM32_TIMINGR_SCLDEL(n)         ((n) << 20)
#define STM32_TIMINGR_SDADEL_MASK       (15U << 16)
#define STM32_TIMINGR_SDADEL(n)         ((n) << 16)
#define STM32_TIMINGR_SCLH_MASK         (255U << 8)
#define STM32_TIMINGR_SCLH(n)           ((n) << 8)
#define STM32_TIMINGR_SCLL_MASK         (255U << 0)
#define STM32_TIMINGR_SCLL(n)           ((n) << 0)
/** @} */

/*===========================================================================*/
/* Driver pre-compile time settings.                                         */
/*===========================================================================*/

/**
 * @name    Configuration options
 * @{
 */
/**
 * @brief   I2C1 driver enable switch.
 * @details If set to @p TRUE the support for I2C1 is included.
 * @note    The default is @p FALSE.
 */
#if !defined(STM32_I2C_USE_I2C1) || defined(__DOXYGEN__)
#define STM32_I2C_USE_I2C1                  FALSE
#endif

/**
 * @brief   I2C2 driver enable switch.
 * @details If set to @p TRUE the support for I2C2 is included.
 * @note    The default is @p FALSE.
 */
#if !defined(STM32_I2C_USE_I2C2) || defined(__DOXYGEN__)
#define STM32_I2C_USE_I2C2                  FALSE
#endif

/**
 * @brief   I2C1 interrupt priority level setting.
 */
#if !defined(STM32_I2C_I2C1_IRQ_PRIORITY) || defined(__DOXYGEN__)
#define STM32_I2C_I2C1_IRQ_PRIORITY         10
#endif

/**
 * @brief   I2C2 interrupt priority level setting.
 */
#if !defined(STM32_I2C_I2C2_IRQ_PRIORITY) || defined(__DOXYGEN__)
#define STM32_I2C_I2C2_IRQ_PRIORITY         10
#endif

/**
 * @brief   I2C1 DMA priority (0..3|lowest..highest).
 * @note    The priority level is used for both the TX and RX DMA streams but
 *          because of the streams ordering the RX stream has always priority
 *          over the TX stream.
 */
#if !defined(STM32_I2C_I2C1_DMA_PRIORITY) || defined(__DOXYGEN__)
#define STM32_I2C_I2C1_DMA_PRIORITY         1
#endif

/**
 * @brief   I2C2 DMA priority (0..3|lowest..highest).
 * @note    The priority level is used for both the TX and RX DMA streams but
 *          because of the streams ordering the RX stream has always priority
 *          over the TX stream.
 */
#if !defined(STM32_I2C_I2C2_DMA_PRIORITY) || defined(__DOXYGEN__)
#define STM32_I2C_I2C2_DMA_PRIORITY         1
#endif

/**
 * @brief   I2C DMA error hook.
 * @note    The default action for DMA errors is a system halt because DMA
 *          error can only happen because programming errors.
 */
#if !defined(STM32_I2C_DMA_ERROR_HOOK) || defined(__DOXYGEN__)
#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      chSysHalt()
#endif
/** @} */

/*===========================================================================*/
/* Derived constants and error checks.                                       */
/*===========================================================================*/

/* Streams for the DMA peripheral.*/
#if defined(STM32F0XX)
#define STM32_I2C_I2C1_RX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 3)
#define STM32_I2C_I2C1_TX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 2)
#define STM32_I2C_I2C2_RX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 5)
#define STM32_I2C_I2C2_TX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 4)

#elif defined(STM32F30X) || defined(STM32F37X)
#define STM32_I2C_I2C1_RX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 7)
#define STM32_I2C_I2C1_TX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 6)
#define STM32_I2C_I2C2_RX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 5)
#define STM32_I2C_I2C2_TX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 4)

#else
#error "device unsupported by I2Cv2 driver"
#endif

/** @brief  error checks */
#if STM32_I2C_USE_I2C1 && !STM32_HAS_I2C1
#error "I2C1 not present in the selected device"
#endif

#if STM32_I2C_USE_I2C2 && !STM32_HAS_I2C2
#error "I2C2 not present in the selected device"
#endif

#if !STM32_I2C_USE_I2C1 && !STM32_I2C_USE_I2C2
#error "I2C driver activated but no I2C peripheral assigned"
#endif

#if STM32_I2C_USE_I2C1 &&                                                   \
    !STM32_DMA_IS_VALID_ID(STM32_I2C_I2C1_RX_DMA_STREAM,                    \
                           STM32_I2C1_RX_DMA_MSK)
#error "invalid DMA stream associated to I2C1 RX"
#endif

#if STM32_I2C_USE_I2C1 &&                                                   \
    !STM32_DMA_IS_VALID_ID(STM32_I2C_I2C1_TX_DMA_STREAM,                    \
                           STM32_I2C1_TX_DMA_MSK)
#error "invalid DMA stream associated to I2C1 TX"
#endif

#if STM32_I2C_USE_I2C2 &&                                                   \
    !STM32_DMA_IS_VALID_ID(STM32_I2C_I2C2_RX_DMA_STREAM,                    \
                           STM32_I2C2_RX_DMA_MSK)
#error "invalid DMA stream associated to I2C2 RX"
#endif

#if STM32_I2C_USE_I2C2 &&                                                   \
    !STM32_DMA_IS_VALID_ID(STM32_I2C_I2C2_TX_DMA_STREAM,                    \
                           STM32_I2C2_TX_DMA_MSK)
#error "invalid DMA stream associated to I2C2 TX"
#endif

#if !defined(STM32_DMA_REQUIRED)
#define STM32_DMA_REQUIRED
#endif

/* Check clock range. */

/*===========================================================================*/
/* Driver data structures and types.                                         */
/*===========================================================================*/

/**
 * @brief   Type representing I2C address.
 */
typedef uint16_t i2caddr_t;

/**
 * @brief   I2C Driver condition flags type.
 */
typedef uint32_t i2cflags_t;

/**
 * @brief Driver configuration structure.
 */
typedef struct {
  /**
   * @brief   TIMINGR register initialization.
   * @note    Refer to the STM32 reference manual, the values are affected
   *          by the system clock settings in mcuconf.h.
   */
  uint32_t        timingr;
  /**
   * @brief   CR1 register initialization.
   * @note    Leave to zero unless you know what you are doing.
   */
  uint32_t        cr1;
  /**
   * @brief   CR2 register initialization.
   * @note    Only the ADD10 bit can eventually be specified here.
   */
  uint32_t        cr2;
} I2CConfig;

/**
 * @brief   Type of a structure representing an I2C driver.
 */
typedef struct I2CDriver I2CDriver;

/**
 * @brief Structure representing an I2C driver.
 */
struct I2CDriver{
  /**
   * @brief   Driver state.
   */
  i2cstate_t                state;
  /**
   * @brief   Current configuration data.
   */
  const I2CConfig           *config;
  /**
   * @brief   Error flags.
   */
  i2cflags_t                errors;
#if I2C_USE_MUTUAL_EXCLUSION || defined(__DOXYGEN__)
#if CH_USE_MUTEXES || defined(__DOXYGEN__)
  /**
   * @brief   Mutex protecting the bus.
   */
  Mutex                     mutex;
#elif CH_USE_SEMAPHORES
  Semaphore                 semaphore;
#endif
#endif /* I2C_USE_MUTUAL_EXCLUSION */
#if defined(I2C_DRIVER_EXT_FIELDS)
  I2C_DRIVER_EXT_FIELDS
#endif
  /* End of the mandatory fields.*/
  /**
   * @brief   Thread waiting for I/O completion.
   */
  Thread                    *thread;
  /**
   * @brief     Current slave address without R/W bit.
   */
  i2caddr_t                 addr;
  /**
   * @brief RX DMA mode bit mask.
   */
  uint32_t                  rxdmamode;
  /**
   * @brief TX DMA mode bit mask.
   */
  uint32_t                  txdmamode;
  /**
   * @brief     Receive DMA channel.
   */
  const stm32_dma_stream_t  *dmarx;
  /**
   * @brief     Transmit DMA channel.
   */
  const stm32_dma_stream_t  *dmatx;
  /**
   * @brief     Pointer to the I2Cx registers block.
   */
  I2C_TypeDef               *i2c;
};

/*===========================================================================*/
/* Driver macros.                                                            */
/*===========================================================================*/

/**
 * @brief   Get errors from I2C driver.
 *
 * @param[in] i2cp      pointer to the @p I2CDriver object
 *
 * @notapi
 */
#define i2c_lld_get_errors(i2cp) ((i2cp)->errors)

/*===========================================================================*/
/* External declarations.                                                    */
/*===========================================================================*/

#if !defined(__DOXYGEN__)
#if STM32_I2C_USE_I2C1
extern I2CDriver I2CD1;
#endif

#if STM32_I2C_USE_I2C2
extern I2CDriver I2CD2;
#endif

#endif /* !defined(__DOXYGEN__) */

#ifdef __cplusplus
extern "C" {
#endif
  void i2c_lld_init(void);
  void i2c_lld_start(I2CDriver *i2cp);
  void i2c_lld_stop(I2CDriver *i2cp);
  msg_t i2c_lld_master_transmit_timeout(I2CDriver *i2cp, i2caddr_t addr,
                                        const uint8_t *txbuf, size_t txbytes,
                                        uint8_t *rxbuf, size_t rxbytes,
                                        systime_t timeout);
  msg_t i2c_lld_master_receive_timeout(I2CDriver *i2cp, i2caddr_t addr,
                                       uint8_t *rxbuf, size_t rxbytes,
                                       systime_t timeout);
#ifdef __cplusplus
}
#endif

#endif /* HAL_USE_I2C  */

#endif /* _I2C_LLD_H_ */

/** @} */